Popular Post Klappco Posted August 17, 2017 Popular Post Report Posted August 17, 2017 Lisa found a picture in a magazine that she wanted me to make. I am thrilled that she said that rather than "should we buy this?" She wants it to turn gray and be charming. The bench in the picture is kind of boring so I'm using my own design. Got going the last couple of days but this will take a bit of time as we have an out of town wedding to go to the next few days. Then I'll have one week before back to school. Some 8/4 and 4/4 Cypress lumber. I'll need more but the store had plenty. The legs and side rails milled up. I'll be gluing up the leg blanks as I want them to be almost 3x3. Front ones will be 25" to top of the arm rail, back will be 37.5" to top with a slightly sloped back. The long 8/4 piece is the top rail for the back that will have a slight curve in the top. Got got the side rails tennoned and the front leg blanks cut and planed to size. Cut out the mortises for the side rails with drill press and mortise chisel. Test fit show they work. Two are just right, the other two are decent. Started working on the back legs getting the slope for the back rest going with the hand plane. I am slowly getting better with hand planes. One nice aspect of the placement of my shop is that it's about fifteen feet away from my pit. Smoking a brisket while making sawdust today. I can tend the pit while I work and get to smell it all day. Used Hickory for wood today. Point and flat resting. Bend test passed. 5 Quote
Popular Post Klappco Posted August 23, 2017 Author Popular Post Report Posted August 23, 2017 Some progress today. Back legs glued up and tapers cut. Will cut the mortises tomorrow. Of course I need the stretchers/rails to do the mortises. Glued up the two long ones today. Will cut the tenons tomorrow and use those to measure the mortises on the legs. The big piece is the top rail for the back. It will get the curve cut tomorrow. Sent from my iPad using Tapatalk 3 Quote
wtnhighlander Posted August 23, 2017 Report Posted August 23, 2017 Looking nice, Klappco! I really like the grain patterns and color in cypress, its nice to see a project using it. Quote
Popular Post Klappco Posted August 24, 2017 Author Popular Post Report Posted August 24, 2017 Got some more done today. Got the top rail for the back shaped. Curved top and straight bottom with a groove for the back slats. Cut off a thin strip to bend for marking off the curve. Worked petty well. All the parts for the legs and cross members cut out. Tenons cut. Big day tomorrow. I left the crosspieces for the back with very long tenons so I can do through tenons, which I think would look cool. As I have never tried those I'm a bit fearful of such an exposed joint. I know to do it first in a scrap as a test, but I am scared. Thus I'm going to sleep on it before commencing. I also need to get going on a finish decision. Lisa wants it to turn to gray over time but I want it protected. I've been researching a bit. Any ideas from the crowd for a finish that helps protect it but still allows it to gray? I know the Cypress is really resistant to the elements in its natural state. 4 Quote
Woodenskye Posted August 24, 2017 Report Posted August 24, 2017 Nice work Klappco! One question, where's the beef? Quote
Klappco Posted August 24, 2017 Author Report Posted August 24, 2017 Nice work Klappco! One question, where's the beef? Going out for tacos this evening. This is the shirt I am wearing. 2 Quote
wdwerker Posted August 24, 2017 Report Posted August 24, 2017 But it's Thursday ! Nice shirt. 1 Quote
Popular Post Klappco Posted August 24, 2017 Author Popular Post Report Posted August 24, 2017 Three and a half hours later the mortises are all cut. Dry fit of side: Glue up of the two sides. Rail mortises are cut and fitted so tomorrow should be a great amount of progress. I'm going to make some sample slats for the back to see how it looks best. I'm thinking 2 and 1/4" wide but time will tell. Oh yeah. I decided not to do the through tenons not due to fear of the holes but from my noticing that the Cypress is really chippy and the tenon ends are best hidden. 3 Quote
Chet Posted August 25, 2017 Report Posted August 25, 2017 23 hours ago, Klappco said: I also need to get going on a finish decision. Lisa wants it to turn to gray over time but I want it protected. I wonder if you couldn't let it be in the weather, get it to the color you wife wants and then protect it with Epifane. 1 Quote
Klappco Posted August 25, 2017 Author Report Posted August 25, 2017 I wonder if you couldn't let it be in the weather, get it to the color you wife wants and then protect it with Epifane. Interesting idea. I need to investigate that. Seemed logical. Quote
wdwerker Posted August 25, 2017 Report Posted August 25, 2017 Never seen a black systainer. Is that something old or new ? Quote
Klappco Posted August 25, 2017 Author Report Posted August 25, 2017 8 minutes ago, wdwerker said: Never seen a black systainer. Is that something old or new ? Came with the sander. I think that was part of the joy of the $99 Festool product. It really is a good ROS. Quote
Coop Posted August 25, 2017 Report Posted August 25, 2017 Pretty cool project. Was not completely surprised with the food injection! Both look great bud! 1 Quote
Brendon_t Posted August 25, 2017 Report Posted August 25, 2017 Maybe it's the angle on the pictures but these components and sub assemblies look massive. Is the inspiration bench your better half found sitting outside a castle by any chance? 1 Quote
Klappco Posted August 26, 2017 Author Report Posted August 26, 2017 Maybe it's the angle on the pictures but these components and sub assemblies look massive. Is the inspiration bench your better half found sitting outside a castle by any chance? They are 2.75X2.75. I like solid. 1 Quote
Popular Post Klappco Posted August 27, 2017 Author Popular Post Report Posted August 27, 2017 No work yesterday or today due to crazy grandma taking up my last day of vacation and today. I did get to grill some chicken so not a total loss. Half the breast. Quarters, wings, and some peppers from our garden stuffed with Manchego cheese and dusted with Oakridge Sweet Rib Rub. Plated. Lordy I hope I get to work on the bench tomorrow as I'm back to work Monday. Another school year begins. Sent from my iPad using Tapatalk 5 Quote
Popular Post Klappco Posted September 3, 2017 Author Popular Post Report Posted September 3, 2017 Crazy week done so I got some time in today. Got the back slats and small spacer pieces cut and glued up. Dry fit the rails in the leg assemblies to maintain alignment. I think this will be easier at final assembly than doing all these parts at once. The back will be one unit. Hope I can get sanding and assembly done tomorrow. Got my classroom put back together this week. Had to take it all apart for painting this Summer. Made it ten minutes before Back to School Night. Had some tunes going for visiting families. Yes, I do have some pictures of meat hanging up in my classroom. 3 Quote
shaneymack Posted September 3, 2017 Report Posted September 3, 2017 Where's the meat? I can't see it. Sent from my SM-G950W using Tapatalk 1 Quote
Chet Posted September 3, 2017 Report Posted September 3, 2017 Never anything wrong with Coltrane playing in the back ground. 1 Quote
Popular Post Klappco Posted September 10, 2017 Author Popular Post Report Posted September 10, 2017 Finally done. Delays due to school starting, very poor air quality, and mean elderly mother. The seat slats are three inches wide. Drilled out 3/8" counter ores and slightly oversized through holes to allow for movement. Screws are coated deck screws and then counterbores are filled with plugs I cut from Cypress scraps. Same method used to attach the arm tips. Got idea for the shape for the arms from Adirondacks I have seen. No process shots as I was trying to get this last part done before wife got home from her Master Gardener event and didn't take time. Process today was cutting to rough length, through the planer, rip to width on the table saw, cut to final length, drill out screw holes, then assemble. First day with AQI under 200 in over a week so pretty nice out. Sorry, no meat today. Take and bake pizza for dinner and the Cougar game. Tried to make one shot black and white to try to get an idea of how it will look when it grays. Once it gets to the color Lisa likes I'll put the Epifanes on it. I am guessing the grain will be less prominent than in this desaturated shot. 4 Quote
Klappco Posted September 10, 2017 Author Report Posted September 10, 2017 Oh, the back leans back at 8 degrees. Forgot to get a side shot to show that. 1 Quote
Chet Posted September 10, 2017 Report Posted September 10, 2017 That is definitely a nice garden bench. I bet your wife will be happy with that. My wife wanted a planting bench built for so she had a place for posting new plants and she was the same way, wanted some age on it before finish. 1 Quote
Klappco Posted September 10, 2017 Author Report Posted September 10, 2017 Some detail shots. The plugs were chiseled and sanded flush but one in the picture doesn't look like it. Slope of the back seen here. 1 Quote
Klappco Posted September 10, 2017 Author Report Posted September 10, 2017 1) Great job on the bench! 2) If Mom wasn't mean when she was younger, she's not mean now! You just gotta understand! 3) Go Cougs! What's your interest? She has been mean my whole life. an abusive, bad person. Cougars are our local team. My wife went there but I love the coach, like the team, and hate their fans. Fun team to watch. My college dropped football my freshman year so we found other schools to root for. My roommate was Marcus Allen's cousin so everyone in my frat were big USC fans. I still am. Sent from my iPad using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.