Recommended Posts

Posted

I've been thinking about getting one of these belt and disc sander combination units, not looking to spend too much.

The size obviously isn't conducive to sanding large furniture pieces, but I also do some smaller hand held objects from time to time where these seem like they would work well. Since it is just sanding, I'm not so concerned about getting a precision machine per say, as long as it moves.

Any particular issue with getting on this model from Wen, or similar? Are they so under powered it will be a problem, or so crummy the belt will be forever flying off?

https://www.amazon.com/dp/B00NAXSYT8/ref=twister_B01M4RQ7PQ?_encoding=UTF8&th=1

Also, any suggestions on the 1" vs 4" belt option? I've only ever used the 4" option, what is the appeal of the 1" wide belt?

Thanks!

 

813FwWMyfNL._SL1500_.jpg

Posted

I have a 1 x 42 for working on golf clubs, and then for finishing and polishing, but not much metal grinding.  I can't see it being useful for much else.   For the larger ones, what you pay money for is the ability to run for long periods of time, which is not needed that much in a hobby shop.  I have one in the metal shop, but haven't ever felt the need for one in a wood shop.

For me, the Rigid spindle, belt sander is much more useful for wood, and maybe even the best bang-for-buck 200 bucks you can spend on a power woodworking tool.

  • Like 2
Posted
1 hour ago, Tom King said:

I have a 1 x 42 for working on golf clubs, and then for finishing and polishing, but not much metal grinding.  I can't see it being useful for much else.   For the larger ones, what you pay money for is the ability to run for long periods of time, which is not needed that much in a hobby shop.  I have one in the metal shop, but haven't ever felt the need for one in a wood shop.

For me, the Rigid spindle, belt sander is much more useful for wood, and maybe even the best bang-for-buck 200 bucks you can spend on a power woodworking tool.

https://www.amazon.com/WEN-6523-Oscillating-Spindle-Sander/dp/B06XGRZ37Q/ref=sr_1_1?ie=UTF8&qid=1510543694&sr=8-1&keywords=spindle+belt+sander&dpID=515hrG5bjTL&preST=_SX300_QL70_&dpSrc=srch

is that a clone of what you are referring to?

Posted

Say what you will about these toys, but that Wen unit does have very positive reviews on Amazon, I might give it a shot. A spindle sander would give me new capabilities I don't have covered right now. Thank you!

Posted

For the $40 difference I would get the Ridgid, plus you can pick one up at Depot and not have to wait or pay shipping. That Ridgid Tom mentioned is a great little machine and will last. 

  • Like 2
Posted

@Isaac  The Wen unit in your opening post looks very similar to Rikon's small unit.  When I checked the Rikon out at the store it really struck me as toy like small.  

I have the Rigid spindle/belt sander.  The Wen unit looks like a dead ringer.  If youve got the funds I would go with that or at least a bigger belt disc combo.

  • Like 1
Posted

Isaac, the model you are interested is really too small for any real application. I started out with one this size, and moved up. Disk sanders can be very useful for shaping end grain. I would consider an 8" (in a combo machine) to be the minimum, with a 12" (in a stand alone) preferred.

The belt sander needs more length to be useful - I have a combo and rarely use the belt sander outside of sharping blades (if anyone is interested in a jig to add to a belt sander for sharpening, look near the top of this Index page. There are two versions). 

Regards from Perth

Derek

  • Like 1
Posted
8 hours ago, derekcohen said:

Isaac, the model you are interested is really too small for any real application. I started out with one this size, and moved up. Disk sanders can be very useful for shaping end grain. I would consider an 8" (in a combo machine) to be the minimum, with a 12" (in a stand alone) preferred.

The belt sander needs more length to be useful - I have a combo and rarely use the belt sander outside of sharping blades (if anyone is interested in a jig to add to a belt sander for sharpening, look near the top of this Index page. There are two versions). 

Regards from Perth

Derek

Thanks Derek, based on the suggestions of others, I'm thinking I'll pick up the spindle/belt sander combo linked above. I agree with your points, I wasn't even focused on the disk sander, but yeah a tiny 4" or 6" disk doesn't sound functional for anything but doll furniture. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 33 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined