Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing out a walnut table top

Featured Replies

I'm a novice woodworker and new to the forum.  I'm going to be starting a new project in the next couple of weeks. I'm building a farm table and the top is going to be out of walnut.  My question is what do y'all consider the best way to finish it out.  I want a fairly durable topcoat with a smooth satin to matte finish. I've thought about some kind of sanding sealer then a varnish finish.  Or would using an oil finish be best, and after it cures topping it with a poly or varnish. Any info would be appreciated. Thanks!

1 hour ago, I B said:

Sounds like a job for ARS to me. 

If you can't get ARS because it's just not around. BTW general finishes website has a dealer locator on it that is very helpful. Wipe on poly is a decent 2nd choice. I'd do 4-6 coats of satin.

ARS is wipe-on poly and Minwax Wipe-On Poly would be a good substitute and usually easier to find locally at the big boxes. 

You MIGHT get a deeper, richer color by applying a coat of warmed BLO first, one of our friends here had a good experience doing that with cherry a while back. However, the oil-based polyurathane finishes mentioned above do a good job on their own.

A comment on satin / matt poly finishes - these are the same formulation as the gloss version of the product, but with "flatteners" added. This is typically a silica powder of some sort, which provide random reflective surfaces in the finish to scatter reflected light and provide the satin sheen. IMO, applying multiple coats of satin can result in a cloudy film that obscures the wood grain. If a thick film is desired for protection, my preference is to use gloss for the base coats, and use satin only for the final one or two coats.

Also, remember to stir the satin or matt products frequently to keep the flattening agent evenly distributed in suspension.

My favorite on walnut is ARS for the first coat and then a few coats of General Finishes High Performance WB poly sprayed on.

No one really mentions it here, but a number paint stores around me carry Old Masters products. I've been impressed by them. So if you can't find General finishes, see if Old Masters is available.

2 hours ago, TIODS said:

My favorite on walnut is ARS for the first coat and then a few coats of General Finishes High Performance WB poly sprayed on.

You should try garnet shellac under that waterborne :D

1 hour ago, Isaac said:

No one really mentions it here, but a number paint stores around me carry Old Masters products. I've been impressed by them. So if you can't find General finishes, see if Old Masters is available.

I’m a big fan of Old Masters products. 

Never heard of them. Another brand i see but never hear about is Behlen. They make a product called rock hard table finish but i have no idea if it's good or not.

46 minutes ago, Chestnut said:

Never heard of them. Another brand i see but never hear about is Behlen. They make a product called rock hard table finish but i have no idea if it's good or not.

Mark has mentioned Behlen before. I think for a salad bowl finish.

1 hour ago, Chestnut said:

Never heard of them. Another brand i see but never hear about is Behlen. They make a product called rock hard table finish but i have no idea if it's good or not.

myoldmasters.comhttp://myoldmasters.com/

  • Popular Post

Whatever finish you decide to use it is very smart to practice on scrap before you tackle the actual table. It is time well spent ! 

Take notes on what grits you sanded to(in progression,don't skip a grit ) how many coats you used, how long you let them dry/cure, what grits you sanded between coats. Thin coats dry quicker.   

Dont get in a hurry ! As you finish a piece do every step to scraps of the same wood. Test for dryness on the scrap, not the tabletop ! Any oil based finish will need time to cure. Cold and humid conditions will slow this process greatly.

Finish tabletops separately. Finish both sides equally. Coat the bottom first so that if you flip it onto pyramids too soon the little marks are on the bottom. If you don't have much scrap the bottom of a tabletop is another place to practice. Mask off any overhanging edges, then practice in the center.

I would do a copule fo coats of ARM-R Seal (wipe on/wipe off) and the final coat (or 2)I would make thicker by using a sponge applicator.

On 12/29/2017 at 11:38 AM, Chestnut said:

Never heard of them. Another brand i see but never hear about is Behlen. They make a product called rock hard table finish but i have no idea if it's good or not.

I use their friction polish for my pens.  Super high-gloss shine in minutes.  Great stuff.

Waterborne floor finish. Varathane or Bona Mega. You can dance on it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.