Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Fuji Q4 Breaker Trip Issue

Featured Replies

The breaker on the machine keeps tripping after about 1 minute of use.  

Curious if anyone else has had this issue and if so, what was done to resolve it?  

I've misplaced my manual in the move so thought I'd reach out to you guys.

 

Thanks in advance!

Remove the filter and see if that fixes it.   Check the cord and outlet. Switch power source. 

I would throughly clean the motor and filter anyways, dust & overspray can build up & trap heat. Lube any exposed bearings?

They have the manuals on their website kinda hidden though.

http://www.fujispray.com/User Manual M-Manual 201701 - Digital.pdf

http://www.fujispray.com/User Manual T-Model 201701 - Digital.pdf

Could try calling as well. I just read they don't recommend attempting service on your own and to call customer support first.

  • Author
20 minutes ago, Chestnut said:

Have you checked the filters to see if they have become clogged?

 

18 minutes ago, wdwerker said:

Remove the filter and see if that fixes it.   Check the cord and outlet. Switch power source. 

I would throughly clean the motor and filter anyways, dust & overspray can build up & trap heat. Lube any exposed bearings?

The "filters" are actually inside and attached to the case.  I did open it up and cleaned them up as best I could with compressed air.  They actually didn't look bad.  

15 minutes ago, Chestnut said:

They have the manuals on their website kinda hidden though.

http://www.fujispray.com/User Manual M-Manual 201701 - Digital.pdf

http://www.fujispray.com/User Manual T-Model 201701 - Digital.pdf

Could try calling as well. I just read they don't recommend attempting service on your own and to call customer support first.

Yea, not a big fan of finding things on their site..  Thanks!

2 minutes ago, TIODS said:

Yea, not a big fan of finding things on their site..  Thanks!

Oh i hear ya. I had gone there recently to pull up how to clean my gun after using it so i remembered their rough location.

I use this on all high speed motors if the bearing is accessible. Router bearings etc.

https://www.woodcraft.com/products/bostik-bearing-lube-5-5oz-aerosol

I don't take things like a turbine completely apart but some disassembly may be needed to clean dust out of a machine like that. I take pictures for referral to get it back together. It's amazing where crap can build up inside a tool. I use a pencil type air nozzle.

The filter on my turbine is washable. 

  • Author

It looks like the filters are replaceable per the manual but, when I opened it up, they appeared to be hot glued onto the case..  Looks like I need to take a closer look at that.

  • Author
Just now, wdwerker said:

I use this on all high speed motors if the bearing is accessible. Router bearings etc.

https://www.woodcraft.com/products/bostik-bearing-lube-5-5oz-aerosol

I don't take things like a turbine completely apart but some disassembly may be needed to clean dust out of a machine like that. I take pictures for referral to get it back together. It's amazing where crap can build up inside a tool. I use a pencil type air nozzle.

Thanks!  The inside of this one was super clean.  It's really only seen about a half dozen projects

  • Author
2 minutes ago, wdwerker said:

I would hesitate on something that new. Possible warranty left ?

Maybe..  I reached out to Fuji so, we'll see.

I don't know if this applies or not, but I have an MK tile wet saw that If I don't lube the motor bearings every few hours of running, it will trip the overload button on the motor. That saw is way past warranty period though.  

  • Author
Just now, Tom King said:

I don't know if this applies or not, but I have an MK tile wet saw that If I don't lube the motor bearings every few hours of running, it will trip the overload button on the motor. That saw is way past warranty period though.  

When you're trying to get a project finished and have this issue, anything helps ;)

There's only a couple hours on this machine total.  I did open it up and it looks good.  

  • Author
33 minutes ago, Immortan D said:

Just another item for your checklist: Is the machine properly grounded?

No special grounding required..  3 prong plug and tried on different power outlets on different circuits.

  • Author
Just now, Chet said:

I wonder if you have a defective breaker on the machine that just now decided to show itself.

That's entirely possible..  Waiting to see what Fuji has to say.

For now, I'm shooting finish one minute at a time ;)  Fortunately, they are small parts so I can get it done.

2 minutes ago, TIODS said:

For now, I'm shooting finish one minute at a time ;)  Fortunately, they are small parts so I can get it done.

Still has to be frustrating.

Not sure this has anything to do with it? How about the power cord? Are you running it through a long orange extension cord?

 

-Ace-

  • Author
4 minutes ago, AceHoleInOne said:

Not sure this has anything to do with it? How about the power cord? Are you running it through a long orange extension cord?

 

-Ace-

No, just the cord that came with the machine.  

2 hours ago, TIODS said:

When you're trying to get a project finished and have this issue, anything helps ;)

There's only a couple hours on this machine total.  I did open it up and it looks good.  

Every course of the brick repair on this chimney, (from the middle of the second story windows to the 43' tall top of the chimney was completely rebuilt), had at least 4 bricks cut with it, so I'm sure just that one job did way more than it was ever expected to do.  My motor guy says it's not worth fixing, but I lube the bushings, and do another job with it.

DSCN8654.JPG

  • Author

Fuji says it looks like the breaker on the unit is failing.  I can send it to them or repair it myself.  Just a couple screws, plug and play.  Part's on the way.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.