Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Upgrading sliding glass/walkout basement door

Featured Replies

I bought a Thermashield unit, ten feet wide, with sidelights, and transom light above the whole door, with sidelights, from that salvage place for $700.  It was fiberglass, and the new price I found on one was 7k.   I paid $700 for it, and it went in a house that sold for a million and a half.   On the same load, I also brought back five or six Marvin windows that had been taken out of a fairly new house (used those on an addition to our house), and a slightly used commercial range.

I'd not buy new unless I had to.

  • 1 month later...
  • Author

While I was failing at the deck project yesterday, the new door was delivered.  I slipped the delivery guys cash to carry it to the back of the house, so that solved that problem.

I went with a cheap Jeld-Wen from HD.

My neighbor came over and took the lead in the installation since I had to remove the J-channel and siding and didn't know what the hell I was doing.  It took a few hours but we got the door in without too much difficulty.  I hate, hate, hate, hate not working alone, but I see now that there was no way I was going to get that done by myself.

The door works but is still too hard to close and open.  It's the rubber seals, as it feels..."squishy."  We adjusted and re-adjusted the door and shims a couple dozen times and got it as good as we could get it.  Hopefully the rubber compresses over time, or something...but, it's still a lot better than the piece of crap builders grade sliding door that it is replacing.

With new vinyl, we would silicone spray the new weather seal. It does not take much to lube that until the seal relaxes a bit. 

Blue, I would go back to HD and see if the one on display acted the same way.

And that helping hand thing, don’t you guys have partners and/or backup when you need it. Same principle. 

  • Author
On 9/18/2018 at 7:54 PM, Chestnut said:

Pic or it never happened.

 

On 9/18/2018 at 8:00 PM, K Cooper said:

Blue, I would go back to HD and see if the one on display acted the same way.

And that helping hand thing, don’t you guys have partners and/or backup when you need it. Same principle. 

The one at the store didn't seem to stick so much.  Three days later, it sticks a lot less than it did right after install.  I need to try some silicone lube on the seal, that might just take care of it.  If not...I *think* I can take an eighth of an inch off the bottom of the plastic threshold without too much fuss. 

I thrive at work working in groups and teams...outside of work, it's different.  A weird personality quark.  I'm not wired like most people. 

20180921_180749.jpg

  • Popular Post

If you go shaving something down try taking a 32nd off first. It can be hard to shim it back up if you take too much off.

A 32nd? Is that somewhere between 1/4” & 1/2”/

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.