Coop Posted July 30, 2024 Report Posted July 30, 2024 I have a friend and former employee that is an amateur photographer. I made several picture frames for his prints and he assisted me on some of them. My brother, due to health issues, recently sold him his jointer, planer and ts to make his own frames. Can any of you guys think of some YouTube videos or even some pay for videos that can assist on his journey? I’d hate for him to lose some fingers or worse by me turning him loose on his own. 1 Quote
Popular Post wtnhighlander Posted July 30, 2024 Popular Post Report Posted July 30, 2024 James Hamilton has a decent list of shop safety videos. The Wood Whisperer has several as well, but they don't seem to be segregated into a play list, that I can find. 3 Quote
Mark J Posted July 30, 2024 Report Posted July 30, 2024 Hamilton (aka Stumpy Nubs) has a very good video explaining TS kickback. 1 Quote
Von Posted July 30, 2024 Report Posted July 30, 2024 Each of those tools had its gotchas, and I'm guessing you'll need a separate video for each plus a video on PPE. A web search for "woodworking safety" turns up lots of material besides videos. I think what you suggest depends on what you think your friend is ready for and their disposition - do you need to convince them about safety or are they already concerned? P.s. kudos for thinking about this. 2 Quote
legenddc Posted July 30, 2024 Report Posted July 30, 2024 I’m very thankful for finding the Wood Whisperer videos on safety early in my discover. If you go to his website and search for safety a lot of old videos pop up. Certainly tools can cause lots of damage quickly but discovering the need for hearing and respiratory protection was great. That being said, I should watch some videos again on tool safety. 2 Quote
h3nry Posted July 30, 2024 Report Posted July 30, 2024 On 7/30/2024 at 7:17 AM, Von said: - do you need to convince them about safety or are they already concerned? Knowing that a tool can be dangerous is the first step, but you still need to be taught how to use it safely ... I had to face this last year when I spent a month in a fully powered workshop, My woodwork had been almost all handtools, and suddenly I was having to use a tablesaw. I never really paid too much attention to Marc's safety videos because I didn't use those tools, but I had watched them, and had absorbed some of the wisdom, and was glad I had. Somewhere on youtube is a video by someone who deliberately induced a kickback on a tablesaw (there should only be the one video, because it was a stupid thing to do, and hopefully nobody else copies him) but it definitely showed how dangerous it can be. 2 Quote
BillyJack Posted July 30, 2024 Report Posted July 30, 2024 Training someone new on power tools is difficult.Ive had new guys come in the shop and try and show them how to do things, but once they get the hang of it, their mind starts wondering or the weekend is coming up and they lose sign of what’s in front of them. I’ve seen people get hurt on the shaper, router table, edge sander(me), table-saw, but never on a planer or wide belt.I think they are intimidated by the sound and size.. 2 Quote
Tpt life Posted July 30, 2024 Report Posted July 30, 2024 Tape off no hands lines. Tell them if they don’t know how to keep their hands out of those zones to fulfill tasks, to ask. Manuals have lots of warnings. I was given time to read them, every time a new tool was purchased. If you did not retain the manuals, consider downloading and printing. Tips come best after a few basic sessions to build experience. 1 Quote
Coop Posted July 31, 2024 Author Report Posted July 31, 2024 All good advice, thanks. I’ve watched many of Marc’s videos but have never seen any on safety. I’ll watch and refer them to him. The guy’s actually a pretty sharp fella and was one of my best installers, being quality and safety conscious. One of the things that I emphasized was, not to use the miter bar and fence on the table saw at the same time when making a thru cut due to kick back. He was over Sunday and he needed to make several respective short cuts and set the fence as a stop and was using the miter bar to push the piece thru. I had to holler, wtf are you doing? I don’t mind him wasting his money on lumber by not measuring twice and cutting once, a lesson he can learn the hard way without blood shed. 2 Quote
Popular Post Von Posted August 3, 2024 Popular Post Report Posted August 3, 2024 FYI, I found the following very informative, especially the two examples moving the fence to the left side of the blade. https://www.finewoodworking.com/2024/08/02/safer-table-saw-methods-for-tricky-cuts 3 Quote
Mark J Posted August 5, 2024 Report Posted August 5, 2024 That's a really good video. I'll also suggest this 5 part series from Stumpy Nubs (aka James Hamilton). 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.