Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Medicine Cabinet

Featured Replies

  • Popular Post

Time to chop up some more wood.

I've decided to replace my bathroom medicine cabinet which I have never liked.

IMG_20260618_110651245.thumb.jpg.eee4c483c2752815dc61cfa32ad2bb47.jpg

And those big right angled mirrors confuse the cat

IMG_20260411_161154918.thumb.jpg.050952df8356cc44bae01883d2ac63b0.jpg

The original cabinet is made to be inserted into a wall with 2x4 studs, but it actually backs into a cavity containing the furnace flue ... and I can actually add a couple of inches depth to the cabinet without making the chimney clearance too small.

IMG_20260618_111504175.thumb.jpg.fad74dc75893942adcd0bec607a81b28.jpg

I'm going to use cherry.  The case work will be made from 1/2" stock ... or actslly about 7/16 after resawing and planing 4/4 boards.

IMG_20260616_155122242.thumb.jpg.45b79f8e4a08ed3175f0054bd58c4d21.jpgIMG_20260617_122341368.thumb.jpg.8ccaa84f7cd2806603678acd6fe913b6.jpg

Then the case parts cut to length...

IMG_20260617_164230738.thumb.jpg.4d2d16a244346ee9da313750d7d5991c.jpg

I measured the cabinet height as 28", so cut parts that long ... but before cutting any joinery I double-checked, and it doesn't fit. Easier than making the hole bigger will be to recut everything to 27-7/8".

  • Replies 63
  • Views 3.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Some dados for the shelves and a groove for the back fit the shelves in The bottom two shelves need some shape to fit the front and dry fit all the shelves

  • Cutting the main pieces for the frame ... The mouldings need shaping using planes on the sticking-board ... apparently it is a "team task". The frame in place: T

  • h3nry
    h3nry

    The door frame ... The door will have a mirror panel, so just needs a frame. The frame needs some rabbets on the back to hold the mirror and a piece of backing plywood. I decided

Posted Images

  • Popular Post

Love the medicine cabinet between the studs format.  Have done a few for family members.  Since most of what shows in the frame it is easy ta match whatever their "look" is.  Fun to make and the client gets to see them almost every day . . . bonus.

  • Author
  • Popular Post

Some divetails to hold the case together. The small ones need to be half-blind to stop them being visible.

IMG_20260619_114137756.thumb.jpg.179c24c4e1d6ee02c9c97e564980e5dd.jpg

And dry fit...

IMG_20260619_114629372.thumb.jpg.c43d275ef3503091696b8c03160054c1.jpg

And before we go any further ... double check it fits in the hole in the wall...

IMG_20260619_124618399.thumb.jpg.5cd04ff1d3d1918de54cc762f469e9b4.jpg

  • Popular Post
On 6/19/2026 at 7:13 PM, h3nry said:

 

IMG_20260619_124618399.thumb.jpg.5cd04ff1d3d1918de54cc762f469e9b4.jpg

Any good Foreman checks his crew's work at all phases of the project. 

  • Author
  • Popular Post
On 6/19/2026 at 6:20 PM, Ron Swanson Jr. said:

Any good Foreman checks his crew's work at all phases of the project. 

Sometimes he micro-manages to the point of obstructing productivity though.

  • Author
  • Popular Post

Some dados for the shelves

IMG_20260619_165829609.thumb.jpg.b9d782958932445e3d430f5780e4e9e2.jpg

and a groove for the back

IMG_20260620_105557569.thumb.jpg.2178f7d62e1230c4f97238643895826e.jpg

fit the shelves in

IMG_20260620_152144344.thumb.jpg.6078a6d73a6d05d3aeeacf264f99be8c.jpg

The bottom two shelves need some shape to fit the front

IMG_20260620_160624762.thumb.jpg.e894c31af221d2532e58fa50a026d147.jpg

and dry fit all the shelves

IMG_20260620_161237195.thumb.jpg.f1bf9323c85636b274ee8319d8f02096.jpg

The bottom two slots will have drawers, with the cabinet door just on the upper two thirds.

On 6/20/2026 at 8:03 PM, Coop said:

Your hand tool work is amazing as always! 

Agreed! Awesome job, thanks for shring!

  • Author
  • Popular Post

Not much progress today ... just added the vertical divides for the drawers.

IMG_20260621_122719780.thumb.jpg.7f736d6e3342c1d1237219674cb8e0ac.jpg

And that is just about everything for the case ... time to start thinking about the "frame".

Impressive work and amazing how quickly you progress!

  • Author
  • Popular Post

Cutting the main pieces for the frame ...

IMG_20260622_164620052.thumb.jpg.32797ab4ef5e04238fb3cb3248f77596.jpg

The mouldings need shaping using planes on the sticking-board ... apparently it is a "team task".

IMG_20260622_151531408.thumb.jpg.6cc420527cb696fbbab4306b4e281c90.jpg

IMG_20260622_160913413.thumb.jpg.17e234937df8381b9e714d354c9abad6.jpg

The frame in place:

IMG_20260622_164503346.thumb.jpg.28cbce89d391f71bea2614d1879a3077.jpg

The mitre saw comes down off the shelf to cut the moulding...

IMG_20260622_165417467.thumb.jpg.02393548db1d6ff82699e904c3e3335d.jpg

Is it all going to fit?

IMG_20260622_170723755.thumb.jpg.798dfa29cdeb441466b47d2d0315763b.jpg

Not bad, just a little work needed to tighten it up...

IMG_20260622_170824412.thumb.jpg.fb6de1ac2a3b8c702de81e6956837978.jpg

I'll leave the top moulding for now since I am, of course, going to make it a bit more complicated.

  • Author
  • Popular Post

The top of the frame will have a semi-circular "arch". This needs to ve 2 1/2" thick, so I need to laminate a piece if 4/4 onto some 8/4:

IMG_20260623_145344722.thumb.jpg.a6b744963ef8f3c813acad07a679b378.jpg

Then draw the semi-circle and cut at the bandsaw

IMG_20260623_162305491.thumb.jpg.18292f53accc636813c7e29d08e0f0cb.jpg

The 4/4 board is actually overhanging the 8/4, but that's ok because, although the arch will be semi-circular ... that semi-circle must be drawn from the bottom of the frame moulding, not the top, so 7/8" must be cut off the bottom of the semi-circle to account for the thickness of the top frame piece.

Then I need to make a piece of curved moulding to go around the arch ... this is segmented with 5 pieces going round a semi octagon. I had to be a bit creative clamping these when gluing...

IMG_20260623_145442725.thumb.jpg.0d65ac6cd0eb03618d49ef081d709a4c.jpg

Then the shape roughed in at the bandsaw ... since these are just joined with end-grain butt joints it is a little delicate ...

IMG_20260623_164842205.thumb.jpg.c4d874a1e2fcc5cbee3f699b1862f3e7.jpg

and a quick fit onto the case to see if it looks anything like what I'm hoping for.

IMG_20260623_165047320.thumb.jpg.10ee50dfeb7ef6b337e6b48f961cd01a.jpg

  • Author
  • Popular Post

Using a rasp to fair the curve on the inside of the curved moulding

IMG_20260624_092134485.thumb.jpg.7fa58f559ac6b283561707749fbc9a9b.jpg

and then it can be glued onto the arch

IMG_20260624_093525024.thumb.jpg.461aa00a8b29f6232e34a70b7028c209.jpg

while the glue is drying I can start prepping stock for the drawers.

IMG_20260624_102424117.thumb.jpg.00cdf13d93920a719ed73286caf79984.jpg

Then shape the outside of the curve using a spokeshave. A file is then used to remove the chatter marks of the spokeshave.

IMG_20260624_114240613.thumb.jpg.7cecb50b61c3b2dc94bb6188ddac92f2.jpg

Then the shape has to be carved into the moulding ... first cutting rabbets with the router plane, then using gouges to cut the curves

IMG_20260624_153300055.thumb.jpg.5b1f255f4af424b593dbc7d457a38190.jpg

And finally try to tidy it up with some sandpaper, and the curved part of the moulding is done...

IMG_20260624_165038171.thumb.jpg.d7e4b65eb1f168c4b778d970ef709227.jpg

 

  • Author
  • Popular Post

managed to attach the top moulding ... not perfect, but it will clean up enough to work.

IMG_20260625_154835840.thumb.jpg.a037bf40ce78fa6c344145c182e117da.jpg

and all the front back and sides for the drawers cut and ready for joinery.

IMG_20260625_111641253.thumb.jpg.10623bd0ab4b1ed630f969642811fdbf.jpg

  • Author
  • Popular Post

I got the drawer dovetails cut ...

IMG_20260626_192532833.thumb.jpg.c16fda1743bccc71629f0e9c83944b35.jpg

I haven't tried fitting them together yet.

I doubt I'll get much done over the weekend ... so next week sometime we'll see how good they are.

  • Popular Post

I’m betting they’ll fit like a glove so enjoy your weekend. 

The speed at which you can work (and with hand tools) continues to amaze me.

  • Author
  • Popular Post

It didn't take too much work to get the dovetails all fitted. I like to cut the tails first, and then just leave them straight off the saw  for the pins I scribebthe actual shape if the tails with a knife  Then highlight the feint knife line on the endgrain with pencil ... which is a bit thicker than the knife line. Then I try to saw leaving the pencil line. Hopefully that means that I still have 1/2 the width of a pencil line to pare off the pins with a chisel (which being along the grain is easy) ... that should result in nice tight joints.

I find that if I try to cut the pins exactly with the saw, I rarely get the angle perfect, abd leave a gap  By deliberately leaving a tiny bit to pare off, I have a better chance.

Drawer boxes together...

IMG_20260629_134322229.thumb.jpg.bfa8ed74a0fd618dbc48f51ec2732887.jpg

The drawer fronts will get a cock-beading. So time to get the beading ready. I wont cut and apply it until after the drawers are glued ... and I wont glue the drawers until after the case is glued ... just in case something changes shape in the glue up.

IMG_20260629_184309717.thumb.jpg.46b9fdfc188d48ca93b1f722c9479bcb.jpg

  • Author
  • Popular Post
On 6/30/2026 at 6:37 AM, Ron Swanson Jr. said:

I always enjoy following your work, @h3nry.

Do you mill your stock by hand also?

Thankyou.

I buy stock S2S which saves a lot of work milling. I now use my bandsaw for the majority of ripping (and all resawing) ... but everything else still by hand.

  • Popular Post
On 6/30/2026 at 10:57 AM, h3nry said:

 I now use my bandsaw for the majority of ripping (and all resawing) ... but everything else still by hand.

Same here. Some battles just aren't worth it to me to fight, and that's one of them. 

  • Author
  • Popular Post

The door frame ...

The door will have a mirror panel, so just needs a frame.

The frame needs some rabbets on the back to hold the mirror and a piece of backing plywood.

IMG_20260630_143042720.thumb.jpg.97bdc87a4db149127da2d4d1e997d813.jpg

I decided to use a bridle joint for the door frame. But I want a mitred look on the front ... and with the rabbets on the back ...

IMG_20260630_174521217.thumb.jpg.d92ffdf21eefa83bddbc19500925e5ef.jpg

IMG_20260630_174528933.thumb.jpg.b0c1e9b3d8450e37060400699a13b9d4.jpg

needless to say it is a pretty fiddly joint to cut.

My first corner was ok ... 

IMG_20260630_174551587.thumb.jpg.07b15c0cd96074a34d4bbb86916b0bcd.jpg

IMG_20260630_174601764.thumb.jpg.96a60eadba7a2266f751958b8e0c0379.jpg

I also got the second corner done

IMG_20260630_182723772.thumb.jpg.ddfd73676f2e974963ceb91af09181c9.jpg

IMG_20260630_182705412.thumb.jpg.3727979aac9a97b26a7915ce7a313288.jpg

Two more to do tomorrow.

  • Author
  • Popular Post

I might as well document cutting the frame joints ...

getting a precise layout is critical, so start by measuring the dimensions directly from the edge to be joined.

IMG_20260701_105405675.thumb.jpg.6c61752654925de7475bea29b59e6ad8.jpg

Then taking depth measurements from the previously cut joint...

IMG_20260701_105734467.thumb.jpg.2facd67f54cba2ea148154025f5fb58c.jpg

layout the cut lines all round...

IMG_20260701_110303501.thumb.jpg.d5521c2487e2a0f8d75b44e5af0bb071.jpg

The first cut can be made with a saw, taking care not to cut too deep.

IMG_20260701_110447572.thumb.jpg.01f67347019fbdda513b91ba2c6645c9.jpg

Then split off with a chisel...

IMG_20260701_110700307.thumb.jpg.add98fec332101d737db1df2825b35d8.jpg

It's not really practical to get a saw onto the next cut, so this is chopped away with a chisel. First on the back...

IMG_20260701_110802181.thumb.jpg.c0d0dc31006955ab5ed03c5308739aab.jpg

Then split off from the end.

IMG_20260701_110949637.thumb.jpg.469f74979e6e6b2151d5fb0b102e3dc9.jpg

Then using a couple of the other rails to stabilise the router plane, rout it all flat and to depth.

IMG_20260701_111442014.thumb.jpg.ee710eedc3ff6f9c08fa66ab3d454c8d.jpg

Then taking care to align the mitre saw exactly on the corner, cut the mitre to depth...

IMG_20260701_111751415.thumb.jpg.1183859799dbdc6740589670c8efa7f0.jpg

and chisel away the waste.

IMG_20260701_111925529.thumb.jpg.9be2513fd82cb9f7f3e71a5b8d53a05f.jpg

clean this up with the router plane...

IMG_20260701_112521048.thumb.jpg.5f391ee42e397f739cb23a176d30193d.jpg

and the first half is done.

IMG_20260701_112553564.thumb.jpg.b6164b2912a8e767910dad071a3005e3.jpg

The second half starts the same way with careful layout...

IMG_20260701_112744327.thumb.jpg.029e39ece8da1eb288487a6a8c403430.jpg

and scribing the cut lines

IMG_20260701_113254862.thumb.jpg.de657f74b0226ed066764be72b49bed9.jpg

The "mortice" is cut with the dovetail saw. first along the top, and down one edge so that I can watch that it is cutting down the line straight

IMG_20260701_113527000.thumb.jpg.40555dce11b26139aa32dc46c4eb62bf.jpg

Then flip the piece round, and saw down the other side.

IMG_20260701_113659153.thumb.jpg.5806cdd6b1e99dca9fbcf177ca945287.jpg

and finally saw out the middle until the saw is flat..IMG_20260701_113748109.thumb.jpg.32ce0ad5095795de0bf38113845a470b.jpg

Then use the coping saw to remove the bulk of the waste...

IMG_20260701_113827340.thumb.jpg.cb6baef11e2495c975b9617e474653c9.jpg

and a small chisel to pare back to the scribe line

IMG_20260701_114011851.thumb.jpg.86181f4ef0e70a99bfe10bf99b0b67bc.jpg

There is then a small block that needs cutting out, best done with a chisel...

IMG_20260701_114346992.thumb.jpg.fc09bb08f63595f6a2859ecb0f35a26e.jpg

And once again cut the mitre. to finish the second halfIMG_20260701_114824142.thumb.jpg.fb76e45df76cb8dd87c7dc56628378ab.jpg

only a small amount of cleaning the inside of the "mortice" was needed for the tenon to fit...

IMG_20260701_115235056.thumb.jpg.86c816468dc3592d723de9150ecc2e59.jpg

IMG_20260701_115254275.thumb.jpg.a414695586ff10dd70d7569fec2c4313.jpg

 

That's how it is meant to work. However, when cutting the fourth corner ... my mitre saw wasn't properly seated in its 45° detente, and cut the mitre slightly off :( so it is a bit gappy.

IMG_20260701_130245146.thumb.jpg.12df782f188a90e3c8aa7936c0475d8c.jpg

I don't think that "3 out of 4 ain't bad" applies here, and I'm not sure if I'll be happy putting a shim in this gap, or whether I will have to do over that piece.

IMG_20260701_143707525.thumb.jpg.9cd4196fc5159bf59b529ffa69686904.jpg

 

IMG_20260701_130425686.jpg

Don't you just kick yourself when you make even a little mistake on the last joint? Don't know how many times that I've done that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.