Popular Post Chet Posted August 8 Popular Post Report Posted August 8 A Hammered Dulcimer is a stringed instrument that is played with small mallets or hammers. I had a request from my brother to see if I would like to try and make one for him. I didn't have anything pending in the shop at the time so I thought I would give it a try. The first and biggest challenge was finding some information on the build process. I finally found something on a website that dealt with instruments like harp, zithers and things of that nature. They had a set of plans that came with an instruction manual for a kit that they sell. I didn't buy the kit just the plans. It was a little bit of a challenge looking at the plans and their manual for the kit, it kind of left a lot of hole in the process. I couldn't decide whether or not to do a journal but that was decided by the fact that I keep forgetting to take pictures. Here is what I did take pictures of. This is the frame, made from maple. the two side rails are laminated to a dimension 2 1/4" thick by 2" wide and the top of the rails have a 15° bevel Gluing the bottom on. The bottom is 1/4" thick alder. The inside bracing. Two vertical and then the one that is at an odd angle creates a crown of 1/16" to the top when that is installed. The top installed. I made this from Sapele and it is 5/16" thick And the final product. I bought as a kit the two decorative sound hole covers, the two brass tubes for the outside bridges, the two wooden bridges that go on the top of the dulcimer and the strings. There are a total of 66 strings, two for each note that are tuned in unison. The first time you tune this it takes three days. You tune, let it sit for a day, then retune it, let it sit another day then tune it one final time. This allows the strings to stretch and the wood to move. 10 Quote
wtnhighlander Posted August 8 Report Posted August 8 That's pretty cool, @Chet! How does it sound? 1 Quote
Popular Post Chet Posted August 8 Author Popular Post Report Posted August 8 I am not a musician but it sounds good to me. It has a nice tone so I must have gotten something right. 7 Quote
gee-dub Posted August 9 Report Posted August 9 I love the dulcimer. Rocky Mountain, Appalachian, Hammered, or Russian. A wonderful, whimsical sounding instrument. People that can play the dulcimer, or harp fascinate me. Talk about a craft that requires muscle memory. There are a few folks that play the fret-less guitar. Similar approach where you know where you are in an almost instinctual manner position-wise. 2 Quote
Von Posted August 9 Report Posted August 9 If it sounds as good as it looks, you've got a winner. Nice job. 1 Quote
Mark J Posted August 9 Report Posted August 9 Nice work! Do you buy the hammers, or do you have to make those? 1 Quote
Chet Posted August 9 Author Report Posted August 9 On 8/9/2026 at 6:23 AM, Mark J said: Do you buy the hammers, or do you have to make those? I made some but I wasn't overly happy with how the felt in my hand so my brother may have to consider buy some. 1 Quote
Popular Post Botch Posted August 11 Popular Post Report Posted August 11 Love this! Hope you can get a video of your brother playing it. For those who've not heard this wonderful instrument, this guy has quite a few videos of performances on them: 2 1 Quote
Mark J Posted August 11 Report Posted August 11 12 hours ago, Botch said: Hope you can get a video of your brother playing it. +1 Quote
Popular Post Chet Posted August 11 Author Popular Post Report Posted August 11 On 8/10/2026 at 6:44 PM, Botch said: Hope you can get a video of your brother playing it. Well that might be a while. He asked me to make this because he wanted to learn how to play it. He does play a number of other stringed instrument so his learning this might go faster, we will see. 4 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.