dramhadhmad Posted February 14, 2013 Report Posted February 14, 2013 For me, it was an easy choice: table saw (Ridgid TS3650). If I had to do it again, I would go with a Grizzly 3hp cabinet saw. That's just me though. Perhaps the opinions being shared here would be more helpful if you described the kind of projects you do. I do not have an MFT, but the versatility, accuracy, reliability and ease of use of a table saw seem hard to beat. Quote
CT Proctor Posted February 14, 2013 Report Posted February 14, 2013 There's no chance I'd give up my TS. Me either, and like dcustoms, I have two of them in my shop. One is a PM66 and the other is an old Rockwell contractors saw that's just used for dado's. Quote
davestanton Posted February 15, 2013 Report Posted February 15, 2013 Tried adding some images and I think I stuffed up. Get the MFT or make one. They are dead easy. Get the table saw later on. Quote
Bobby Slack Posted February 15, 2013 Report Posted February 15, 2013 I use my MFT a lot. Of course my tablesaw is a litte one. The MFT is a great solution and goes beyond the saw, you can also use it with your domino and OF1400 so is a powertool bench. Quote
jmaichel Posted February 15, 2013 Author Report Posted February 15, 2013 It looks like I am going to go with the MFT. I found someone locally who has an older MFT 1080 with some clamping elements for a great price. I will still have a little room left in my budget if I find that I need a table saw. I honestly did not think I would end up with so much Festool equipment but in the end I could not bring myself to buy a table saw and jointer knowing that I will be looking upgrade sooner than later. 1 Quote
jmaichel Posted February 17, 2013 Author Report Posted February 17, 2013 Well after much contemplating over the last week, I ended up ordering a Grizzly 0713 table saw last night. A 10% off coupon pushed me over the top. I may end up returning my domino and getting a jointer instead. Quote
davestanton Posted February 17, 2013 Report Posted February 17, 2013 The MFT 1080 maybe too short for you. The MFT 3 is a much better device. Regarding returning the domino, apart from not liking people returning items due to a change of heart, I thought the whole idea of what you were doing was to go light at present and then get heavier machines after you move. I do not follow the line of thought of your last post. Quote
Eric. Posted February 17, 2013 Report Posted February 17, 2013 I do. There are many ways to make a mortise and tenon. Not that many ways to flatten the face of a board. Unless you like torturing yourself milling with handplanes, it's a logical decision to me. Can always get another Domino later...they're not going anywhere. Quote
jmaichel Posted February 17, 2013 Author Report Posted February 17, 2013 The MFT 1080 maybe too short for you. The MFT 3 is a much better device. Regarding returning the domino, apart from not liking people returning items due to a change of heart, I thought the whole idea of what you were doing was to go light at present and then get heavier machines after you move. I do not follow the line of thought of your last post. I am trying to keep it light but I feel that I will miss a table saw. The reason for the 1080 is because I can get a very good price and slightly used the MFT 1080. I have not used the domino at all, original packaging is still in tact. I don't think there is anything wrong with having a change of heart on an unused product. I did not say that I was going to return it for sure, I was just contemplating it. Eric, I have no interest in milling with hand planes, I tried that once and it drove me nuts and out of woodworking for a while. I am going to check with my hardwood dealer and see how much they charge to mill lumber. If it's reasonable I may go that route and keep the Domino. Quote
stahlee Posted February 17, 2013 Report Posted February 17, 2013 I'll be on the side of not returning that Domino. If you use it you'll be happy you bought it. Quote
Eric. Posted February 17, 2013 Report Posted February 17, 2013 This is the problem with asking the "what tool should I get next" question. You ask a hundred guys, you'll get a hundred different answers. I personally couldn't fathom dropping almost a grand on a Domino before I had a jointer, but to each his own. It's a personal choice depending on what kind of work you do and how you want to do it. 1 Quote
Dave H Posted February 18, 2013 Report Posted February 18, 2013 What type of projects are you building, because I've built many projects before my completly tooled up shop with just a skillsaw, and a straight edge I built an entire set of kitchen cabinets with this set up in my front yard. Now I have a table saw bandsaw drill press everything a guy could want in a 36x36 stand alone shop. I can build anything that I can think up, but the question is it that much better now that I have thousands of dollars wraped up in it ( the kitchen cabinets are still in use today that was 30 yrs ago. Just because you throw thousands of dollars at something doesn't make the end product better, it's the craftsman that does. Now I'm not trying to talk you out of buying anything, but if your building straight forward furnature, and cabinets I'll bet with alittle imagination, and half of your buget you can build some amazing projects that will out live you. But if you just want own these things than buy them if thats what makes you happy, but I've found the more tools I have the more I want you buy something today, and than next year they come up with something that makes that purchase seem like a toy in comparison. So I guess what I'm saying make a list of what you want to biuld, than make a list of what you actually need to complete these tasks now everything else are just "wants". That being said my favorite tool is my table saw I use it on every project that I build, I use all my other tools here, and there but the tablesaw is at the center of my shop "literally". Quote
Byrdie Posted February 20, 2013 Report Posted February 20, 2013 This is the problem with asking the "what tool should I get next" question. You ask a hundred guys, you'll get a hundred different answers. I personally couldn't fathom dropping almost a grand on a Domino before I had a jointer, but to each his own. It's a personal choice depending on what kind of work you do and how you want to do it. Agree highly. Personally, I can't see buying a Domino unless I were in a production environment needing to produce a high number of tenon type joints. I just don't find mortise and tenon joinery that hard to produce including floating tenons. A table saw, a drill press (have the Delta mortise cutting attachment so I can do that way or with forstner bits) a set of chisels and a marking gauge will get the job done every time. Quote
jmaichel Posted February 20, 2013 Author Report Posted February 20, 2013 I can only get a 6" jointer, I don't have 220 and I don't have 2k for the DJ20 the 8" jointer that Delta makes that runs on 110. What I do have is my hardwood dealer who will mill my lumber for me for .35 a bf. If I find that I can't live without a jointer than I will see about getting one. As far as M & T joinery is concerned, you are right there are several other ways to make that joint. I have used almost all of them including using mortise chisels and a tenon saw. I don't have a drill press and I don't really want to have to make room for it. The fact is I had to focus on what I really want to achieve and that's building furniture. I don't have a lot time in the shop and so I have to make the most of it when I am in there. I feel the Domino will give me the efficiency that I am looking for. Quote
Trip Posted February 20, 2013 Report Posted February 20, 2013 Over for FOG (the Festool Owners Group) forum, there is a really long and detailed MFT/TS discussion. It would probably be interest to the OP. Quote
pghmyn Posted February 20, 2013 Report Posted February 20, 2013 I can only get a 6" jointer, I don't have 220 and I don't have 2k for the DJ20 the 8" jointer that Delta makes that runs on 110. What I do have is my hardwood dealer who will mill my lumber for me for .35 a bf. If I find that I can't live without a jointer than I will see about getting one. As far as M & T joinery is concerned, you are right there are several other ways to make that joint. I have used almost all of them including using mortise chisels and a tenon saw. I don't have a drill press and I don't really want to have to make room for it. The fact is I had to focus on what I really want to achieve and that's building furniture. I don't have a lot time in the shop and so I have to make the most of it when I am in there. I feel the Domino will give me the efficiency that I am looking for. Since you have your hardwood dealer milling your boards, the only real reason I see that you would need a jointer would be to really square up some edges for panel glue ups. For something like that, you can buy a cheap/used 4" or 6" jointer from craigslist. I'm talking about a small bench top version. I've seen them on craigslist for around $100 - $200. Quote
stahlee Posted February 20, 2013 Report Posted February 20, 2013 He can also just make a sled for the planer. Quote
dwacker Posted February 20, 2013 Report Posted February 20, 2013 I think folks are forgetting the milling process. If you're buying s4s or having your supplier mill that's great but unless they are rough sizing you're still in need of a jointer. 9 times out of 10 when you rip a longer board the stress will relieve. This is seen by the kerf closing as you rip the boards. It may be a little or it may be a lot but its happening. Even if you rip a nice straight 6ft long s4s board most of the time you will be left with a relieved board. This is even more of a problem today than ever before with the high speed drying process being used by most mills. Don Quote
pghmyn Posted February 21, 2013 Report Posted February 21, 2013 Look what came today! Going to pick mine up at 5:00 Take pictures of the setup! Quote
jmaichel Posted February 22, 2013 Author Report Posted February 22, 2013 That was quick! I live near the WA store. Quote
Nick2cd Posted February 22, 2013 Report Posted February 22, 2013 U will love that domino if u keep it! I adore mine. Congrats on the new saw! I feel strongly that u made the right choice!!!! Quote
batfish1010 Posted February 28, 2013 Report Posted February 28, 2013 McQ And Eric 1978 are spot on... You really need to power up.. And get you a quality table saw. The amount of accessories you can make for you table saw is far more important. http://williamolsendesigns.com/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.