Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

band saw fence

Featured Replies

just bought this machine http://www.amazon.com/708115K-JWBS-14CS-Horsepower-Woodworking-Graphite/dp/B00006ANS4 just older and different color.  i want to get a fence for this bandsaw but i dont even know where to start to buy a after market fence anyone have any ideas?  any recomendations?

 

im also thinking i might someday want riser and perhaps better guides any advise?

I got the Kreg fence (part# 1460050 at Woodcraft) with the micro adjuster for my bandsaw and am very happy with it.  The destructions make it sound like it will work with a variety of saws although some of the instructions include the use of a drill.

Before you spend any money on a fence take a scrap of wood and two clamps, then draw a line down the center of a scrap and try free hand ripping it. Stop halfway through the rip and mark the edge of the board on the table. What this exercise will show you is that no bandsaw blade cuts exactly straight, they all lead a bit to the left or right. So copy the angle and clamp the board at that angle how ever far from the blade you wish to rip or resaw on your new bandsaw.

A blade with fewer teeth works best on thicker stock.

Make sure the edge of your fence and stock being ripped is 90 degrees to the face , as well as the blade being 90 to the table or you will rip angled wedges.

Congratulations on your tool!

  • Author

saw a video for kreg fence that can be ajusted alot ot the left or the right so that you can line it up with you blade thinking i might get something like that.

DK, I'v eheard really good things about the Kreg fence.  I have the Laguna DriftMaster on mine and love it, but it's a chunk of change.

  • Author

hmmmm in the same price range as the kreg as well thanks ct ill look into geting that one.

Wood recently did a review of bandsaw fences. They liked the Kreg, the Rockler and the Woodhaven, FWIW.

Buy 2 mag switches and build your own. All bandsaws do not track one way or the other. Rather than skewing the fence, adjust the tracking of the blade. You can get straight rips without monkeying with the fence. That being said, it is easier to adjust the fence to compensate with the mag switches but not as easy to repeat the adjustment.

My fence has been set parallel to the miter slot for more than 5 years. When I change a blade, I adjust the tracking for a straight cut. Takes about the same amount of time as setting the fence but I find the fences adjustments fidigety.

BRuce

All bandsaws drift. You can not adjust tracking for drift. Your wheels should be coplaner at all times. Your guides control blade flex but do not really guide the blade. You can however create the illusion of a perfect saw and blade with the fence aligned to the miter slot. BUT on most saws this is a pain and not worth the effort especially if you change blades frequently. Small saws the work space is to small to get in there to easily make the adjustment thus why folks just angle the fence. Big modern saws are designed to easily adjust the table and fence as an assembly making them appear at first glance to have no drift. My saw for example just has a couple knobs under the table to move the fence and table as an assembly, this keeps the fence aligned with the miter slot so no need to adjust the fence.

For the average woodworker with little 18" or smaller saws its just alot easier to angle the fence or buy an aftermarket adjustable fence.

Carter has always made nice stuff. They would be the first one Id look at if I was shopping.

Just a word of caution on the Carter mag fence, it moves.  I was thoroughly disappointed with it.  It has a place as an aux fence, but not ever as a main fence.

That was my thought when I looked at the link, a fence shouldn't be effected by side forces(scooting). Plus you would have to deal with parallel on every set up unless I'm missing something.

Plus you would have to deal with parallel on every set up unless I'm missing something.

Thats where you have to get under the table to make your drift adjustment. With something like a mag fence you would still need to reference off the edge of the table to set the fence distance. Looks like a good product but would be a shame if it moved by accident.

I have a Kreg fence, and it's nice...

 

However...  For many years, I ripped on the band saw freehand to a line, or by clamping the corner of a board the correct  distance from the blade.  The work rides against the corner, and the woodworker adjusts feed angle to correct drift.  The board gets fine tuned with hammer taps.

 

I still do most of my bandsawing to a line, and never bother with the fence.  If it wasn't a gift, I'm not sure I would have bought a fence.  Before you spend, do some ripping to a line, and try the clamped corner.   Both are free to try.

I own a Carter mag fence and have had no issues with movement or scooting, but I have the second / newer version of the fence, for what it's worth. Alex Snodgrass of Carter (the guy always involved in bandsaw clinics) frequently makes the point that if a bandsaw is properly tuned, drift should be non-existant. I agree with him to a point and I personally have no issues with worrying about drift adjustment, however I can definitely see it being a pain in the butt if switching out blades frequently, making drift adjustment easily the quicker option to just get going already.

 

If you are adjusting for drift, then the mag fence indeed makes that ridiculously arbitrary and easy, but the weakness of the fence - as mentioned - is that because it's not on a rail system, you can't hold that adjustment for drift if you need to back the fence up or move forward. 

This is the method I used until I got my grizzly resaw fence that I can skew for drift.

I have a Kreg fence...love it....tossed out the cool blocks, put the steel blocks back in my saw use a 3tpi 1/2 blade for re-sawing. Works great.

 

-Ace-

  • Author

i was looking in one of my catalogs and they have gudes that go in the square blocks they have two small bearing mounted to it.  do those work well?

 

http://www.woodcraft.com/product/2001885/3608/bandrollers--fits-jet-and-most-imported-14.aspx then i dont have to get a whole new guide system.  and all the reviews the kreg fence has good rateings.

I haven't used the Carter fence but I do have the magswitch feather board. I can't make it move and it has not been moved by material on the TS. I like one other poster tend to use one blade and not switching blades all the time ,so for me it is earlier to adjust the BS for neutral drift and move on. I suggest that people try it and even if you can't get it perfect you will need less adjustment in the fence. Cutting to line or clamping a board on the table is all that is needed. If you have money to buy a micro adjustable fence that is great but like in most things woodworking skill is going to be a large factor in your success and workmanship.

Sorry particleboard, I have a Jet 14" with riser and it is easy to set it so it doesn't drift. You don't need access under the table and most people have already set their wheels co planer. I do agree that if you can't do it easily on your BS, then the fence is the solution. Or if you are changing blades frequently then the fence if easier.

I don't have access under the table because I have a DC box surrounding the lower guides. It does come off but not conviently.

BRuce

Sorry particleboard, I have a Jet 14" with riser and it is easy to set it so it doesn't drift. You don't need access under the table and most people have already set their wheels co planer. I do agree that if you can't do it easily on your BS, then the fence is the solution. Or if you are changing blades frequently then the fence if easier.

I don't have access under the table because I have a DC box surrounding the lower guides. It does come off but not conviently.

BRuce

Please explain how you set your wheels co planer with no adjustment. Please explain how you adjusted for drift without changing angle. Im sure everyone would love to know.

Sure, there are plenty of Videos but I'll give a Readers Digest version. Assume wheels complainer and you have just put a new blade on. Chances are you will have to adjust the wheels from exactly complaner in order to get the blade to track correctly. This is due to wear on the tires. Draw line on a board, cut and check for drift. Drift is normally due to slight differences in set of the blade or tire wear. This is a very very small difference. Adjust the tracking of the the blade minutely, not a quarter turn but small changes and check again. The change in tracking will alter the attack angle of the blade. Once it is neutral, lock the tracking adjustment, do a final set on the upper and lower guides and I am done. Do I recommend this for everyone, no.

Particleboard, I ment no disrespect but there are few things in woodworking, other than splinters, that are absolutes. My technique works for me, and others.

Michael Fortune is a pretty big advocate of never needing to adjust for drift with proper setup. I haven't employed his methods yet, but on the next bandsaw tuneup you can bet I'm going to try it. I have a DriftMaster, so adjusting for drift is no problem. But if I can get my blades to run straight and true using some other simple methods, why not give it a shot!

I believe he has a book out there and possibly more videos, but here's a quick setup video: http://www.finewoodworking.com/tool-guide/video/how-to-set-up-a-bandsaw.aspx

 

His talk at WIA really focused on the whole drift issue. I just don't remember all of the details. I was busy texting Nicole on my phone at that time. :) 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.