Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Getting the Internet into my shop

Featured Replies

Any IT guru's in the house? I want to get the internet into the shop. Problem is the shop is in a 42 x 72 pole barn about 40-50 yards from the house, and I can't even get a cell signal in it. If I want to use my cell I have to walk out outside. We do have broadband in the house and a wifi signal booster in the corner nearest the shop, but even with a signal booster I can't pick up the signal in the shop.

The broadband is a radio based service, I called the provider and they said the only way to do it is to put a modem antenna on the pole barn and pay another monthly service fee. That ain't happening! There's also a paved drive running around the barn so I can't bury a cat 6 cable from the house.

Any body have any ideas or know of a system that will work?

Chris

I have a very similar situation, including the booster at the closest location.  The only differences is my pole building is a little closer and a little smaller.

 

I tried everything but, ended up buying the direct burial cable, digging a ditch, and running the wire.  From there, I added a router and set up wireless within the building.

 

Maybe someone here has a better answer but, I couldn't find any other way.

Hi Chris, as you have electricity in the shop you can get a pair of tranceivers that use the mains electricity cables as a LAN conduit. Essentially you have one transceiver in the house that you plug into a vacant electricity socket. You then take a LAN cable from your broadband router and plug it into a LAN socket on the tranceiver. The tranceiver then transmits the broadband signal along the power cable into your shop where it is extracted by the other tranceiver. You then take a cable out of that and either plug it into a LAN switch (this could be another wireless extender) or directly into your computer. The only caveat is that the mains socket in the house has to be on the same circuit as the equivalent socket in the shop to transmit its signal. It's called Ethernet Over Power and I believe Amazon sell devices for the USA and there are probably many other companies selling them over there. Have a look at this http://www.amazon.com/NETGEAR-XAVB101-Powerline-Ethernet-Adapter/dp/B001AGM2VI

Other than that you will have to run a CAT 5 or CAT 6 cable through to the shop. It doesn't need to be buried but maybe you could arrange it to be aerially erected along a catenary? But ethernet does have a finite limit as to how far you can go with structured cabling. From memory I recall a single run of CAT5 or 6 can be a maximum of 100metres (328 feet) in practice 90 metres including two 5 metre drop cables one at each end between active devices.

As suggested above, I would just run a dedicated cable to the shop. Cat 5 is cheap, and it would benefit from being a direct connection in the long run since you say reception is extremely spotty.

 

EDIT:

1000' under $150.

 

Although that may be extreme :)

  • Author

Tiods & Sam, I would bury a cable but there's an asphalt drive running around the building.

Terry, that sounded great until the part about the same circuit, that's a no go too. Sounds like I might not have many options.

Can you push a pipe under the asphalt?  My neighbor had this done at his place and it worked well.  I'm not sure what the cost was tho.

Not sure if you've seen it?  Essentially, dig a large enough hole on each side, cap the end of the pipe, and the machine pushes it thru. 

 

I live in the county and the farmers use this method to push irrigation lines under the roads all the time.

 

Good luck!

  • Author

Thanks Tiods, I've seen it done and its probably the best option. The drive isn't real wide so it might not be too bad to do it.

post-6871-0-34161700-1377907379_thumb.jp

I think I'd go the wireless range extender route.  You already have one in your house.  If you turn that one off and stand outside your shop nearest the house, can you get a decent signal with a wireless device?  Again, test outside, not inside.

 

If you can get a decent signal, you might be able to use this product:

 

http://www.amazon.com/ERB9250-300MB-Extender-Removable-Antenna/dp/B002YK1B8Y/ref=sr_1_2?ie=UTF8&qid=1377908149&sr=8-2&keywords=wireless+router+with+removable+antenna

 

The key are removable antennas.  You can then buy 2 of these: http://www.amazon.com/dp/B0085WCB9I/ref=as_li_ss_til?tag=securicom07-20&camp=0&creative=0&linkCode=as4&creativeASIN=B0085WCB9I&adid=10TMXQZJZ6HSXQS4GN4P

 

(they are currently out of those, but those are the product specs you'll need and other sell them)

 

Idea would be to buy the above range extender, install inside the shop nearest the house perhaps up on a shelf.  Run 2 holes through the wall to pass the 2 cables.  Mount the antennae outside.  If they are high up under the soffit, they'll be protected from the elements well enough.  They are replaceable anyway.

 

Hopefully this will connect to your main base station as you wouldn't want to rely on a range extender connecting to a range extender.  Also note: this particular range extender with removable antennae is 2.4GHz only so if your home wireless router is 5GHz only, they won't talk to each other.

 

Here's a review of the above extender by someone who has very much the same problem you have.  It's long, but he has a lot of detail and some detail was added after he used it for a long time.

 

http://www.amazon.com/review/R2T6FO52HO7FGB/ref=cm_cr_dp_title?ie=UTF8&ASIN=B002YK1B8Y&nodeID=172282&store=electronics

Little different approach.

 

How thick is the asphalt? If thick enough, you could cut out a trench and place a small conduit in it. Then use cold asphalt patch over the pipe. Might be a little risky on it holding during freeze and thaw. 

 

Where do the gutters drain? They go under asphalt? Push a 1/2 elect pvc through that? 

Running a cable is for sure the faster and most reliable way, but bear in mind the maximum transmission distance for Category 5 or 6 Ethernet cable is 100 meters. Any more and you WILL have problems. You might consider a WiFi bridge ( https://m.cdw.com/shop/search/?wclsscat=N26&cm_mmc=acquirgy-_-Google-_-High_Priority-_-Wireless_Bridge&AcquirgyID=11089964) as an option. It sounds like your shop has metal siding tat blocks the signal, but you can put the bridge outside, under the eaves for rain protection. Should work as long as you have a clear line of sight to the house. You could even make a little cabinet to shelter it, just leave the house side open. That's assuming you don't want to fork over the bucks for a unit having external antennae

If its not too wide, or deep, you could try something like this: http://www.amazon.com/Orbit-Sprinkler-System-Walkway-53333/dp/B00004S23H/ref=sr_1_1?ie=UTF8&qid=1377910910&sr=8-1&keywords=Irrigation+line+under+sidewalk

You hook it to a garden hose or irrigation line and the water pressure helps you tunnel under walks and drives.

  • Author

Paul- Marcel - That is awesome!!! Will give this a try. Thank you very much!

Southwood - the gutters at the back go into a French drain, the front gutters go into the pond.

Or... Go old school.  Check to see if DSL is still offered in your area.  If it is, call the phone company and have them install a line to the barn.  If there are few DSL subscribers on the hub, the speeds go up almost exponentially.  My grandparents' estate is one of the last DSL subscribers in theirn neighborhood (suburban, so not quite the same thing for you), but since there's no demand on the system, any computer hooked up to it flies.  (Which might mean you get better service in the shop than in the home... so your family will never be able to tear you away from it... so it's got both an up side and a down.)

 

We use a cellular-based internet connection rather than DSL, broadband, or cable, so that's another option... but I don't think you really want to pay for two distinct ISPs.

Water bore and your asphalt will cave there. Water boring is only useful under concrete. Asphalt is too soft.

Did not know that. That's good to know before it was too late.

If you have a desktop in the shop with a network card with a little antenna coming out the back, unscrew that antenna buy a cable if needed (from PC through small hole in shop wall to ext. antenna)  and ext. antenna like http://www.amazon.com/Amped-Wireless-Outdoor-Directional-AD14EX/dp/B004WPUHXO

or if it's a laptop, you said "broadband in the house and a WiFi signal booster" unscrew one antenna from the signal booster through small hole in the house to ext. antenna.

I have installed the signal booster with ext. antenna and it worked about a block away.

Also what wireless protocol are you using?  approximate outdoor range of 802.11A 390 ft, 802.11B and G is 460ft. and 802..11N is 820ft. so going to N maybe the ticket. see chart http://en.wikipedia.org/wiki/IEEE_802.11

​or plan D, do you have Cable TV or telephone cable running overhead to the shop? wrap the CAT 5/5E/6 cable around that cable to the shop.

Bob, I may have been overly negative. You can bore under asphalt but generally not with the water boring technique and generally at a prohibitive depth.

  • Author

Thanks Doug, will definitely look into this. Network in the house is an N and there is no cable or telephone to the shop.

  • Author

Morton Building?  They built my shop and couldn't be happier!  As far as the internet; can't offer much help there :( ...

 

Good luck!

It's an FBi building, which is similar to your Morton, we've been very happy with it too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.