Popular Post bgreenb Posted September 9, 2013 Popular Post Report Posted September 9, 2013 Hi all, Back in February, my parents told me they were out shopping for a new dining table. I had been thinking of building a trestle style table for some time at that point, so I showed them some pictures of what I was thinking of doing, and they loved it, so I decided to build it for them. I've only been woodworking for about a year now, and this is the first project that I've actually designed myself from start to finish. Obviously the trestle concept is nothing new, but all the specifics of the design are original. In keeping with Marc's recent post about beginner/intermediate/advanced, I would say that I bit off a significant mouthful with this project. Not necessarily more than I could chew, but there were a number of challenges/techniques that were completely new to me: - Working with such large parts was a big challenge, particularly the top, which measures 40"x82". Flattening those long boards for the top and keeping them flat was very difficult. - I had never cut curves before, and in fact had just obtained a bandsaw before starting this project (my father in law was able to get one for free through a shop program in his town that was sadly being discontinued). - Both wedged and drawbored tenons were completely new to me. - My parents wanted a gloss finish on the top, so I had to do a pore fill, which was also completely new. More on that later. The entire table is solid walnut except for the wedges on the stretcher tenon, which are cherry. The legs are connected to the arms and feet via 2.75" long tenons that are also drawbored (this base is NEVER coming apart!) I used french curves to draw out templates for the feet and arms until I found something I was happy with. I ended up adding upper rails (connected via M&T to the arms) to give the structure a little more rigidity, as it's fairly wide for a trestle table. I added gentle curves to the ends of the top, as it didn't seem to look right when it was totally rectangular. I profiled the top using a 1/2" roundover bit that wasn't lowered all the way (like the way Marc did the legs to the tilt top table) because I didn't really want a full bullnose. I also did stopped chamfers most of the way across the stretcher to give it some visual interest. The base is finished with a few coats of Arm R Seal semi-gloss. I pore-filled the top using timbermate ebony to keep the pores visible while still filling them. Man what a great product. I then used about 4-5 coats of Arm R Seal gloss to finish up. I rubbed out the finish using Marc's 50/50 mineral oil/mineral spirits method using a 3000grit pad. I'm very happy with the results given my experience level and the fact that I was tackling lots of new challenges, and my parents are THRILLED with the table (direct quote from my Dad - "holy #$%@, this from a kid who could barely screw in a lightbulb growing up!") But in the spirit of honest feedback, there are definitely some things I would do differently if I were tackling this project again: - I'd probably use quartersawn stock for the top. Not just for stability, but also visually I think it would look better to have straighter grain. Though I kind of go back and forth on that one, as I do kind of like the wild grain patterns in the flatsawn stock. I did think about this in advance, but I just couldn't justify the cost of the QS stock. - No pore fill. Man what a PIA. I do think it looks good, but it'll be a long time before I pore fill a project again, at least something as big as this. - I'd spend a little more time on design, and possibly build a simple prototype to at least get scaling right. I think the base is a little too long relative to the top, so the people sitting at the ends won't have a ton of room for their legs. Finally, special thanks to Marc, who provided all the video content that allowed me to even get to this point and for some 1on1 email assistance that completely saved me during the finishing stage. And thanks to everyone on the forum who provided me with help and advice along the way - far too many to name but suffice it to say this place is invaluable to a newbie. Some pics attached - sorry for the poor quality iphone pics. 5 Quote
Tony Wilkins Posted September 9, 2013 Report Posted September 9, 2013 Very nice. Very similar to what I have on my honey do list for us in the future. Thanks for sharing. Quote
..Kev Posted September 9, 2013 Report Posted September 9, 2013 Beautiful table, your parents should be very happy with that for many many years! Quote
Byrdie Posted September 10, 2013 Report Posted September 10, 2013 Very nicely done and I think the grain pattern on the top is what gives this project most of its character. Quote
woodieboy Posted September 10, 2013 Report Posted September 10, 2013 A beautiful table. I am very impressed. Totally a quality work! Congratulations. Quote
mds2 Posted September 11, 2013 Report Posted September 11, 2013 I'm a big fan of trestle tables and you did a great job. Quote
ColinF Posted September 12, 2013 Report Posted September 12, 2013 Very beautiful table! Great work!! Quote
lonestarwood Posted September 15, 2013 Report Posted September 15, 2013 Very beautiful table. I really like the little details you put into it! Should last a couple hundred years. Quote
bgreenb Posted September 16, 2013 Author Report Posted September 16, 2013 Thanks for the kind words everyone. I was a bit intimidated to post it here given all the fine work everyone does. I appreciate the positive feedback. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.