Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

opinion of Grizzly

Featured Replies

I bought my first and last grizzly product (a tenoning jig) a few months ago.

 

The casting and machining work was so poor that it was impossible, even with the adjustments at their extremes, to cut a tenon cheek parallel to the blade. It wasn't a small inaccuracy either--it was out by .100 over 10". 

 

The manual was pretty rough, and the unboxing and setup procedure was unnecessarily lengthy, requiring nearly a complete disassembly and reassembly of the jig, which, I should add, had about twice as many components as it needed to to get the job done.

 

Basically: poor design, poor qc, poor documentation, and a product that didn't even work right once. I can't believe I wasted six hours on that thing. No interest in dealing with a company like that any further.

 

My Dad's Ford Pinto was a turd, but I haven't written off all other Ford products because of it..... which is actually in my best interest. You're free to disregard whatever products you like, but excluding all Grizzly tools based on that China-clone tenoning jig, removes some of the best values in machinery on the market from your list of potential tools.  There's not a company out there with no chinks in the armor.

 

A lot of people seem to have experience with Grizzly's (purportedly excellent) customer support. I see this as a negative--the best products are the ones that require no interaction with customer service reps at all. I have no idea what festool, lie-nielsen, apple, nikon, or bosch customer support is like because none of the dozens of products I've purchased from each of them have ever failed to do their job.

 

 

I would argue that Grizzly sells more tools than all the other tool manufactures combined. Therefore the probability of Grizzly's tools having more defects than other companies are much higher. Grizzly is also in the business of making money and good quality control costs money. It is probably cheaper and easier for Grizzly to just replace a poorly manufactured tool then it would be to QC each tool individually.

 

I have some Grizzly tools and I like them. I did have one issue with something that I bought from them (not a machine) and was not very happy with how customer service handled my issue, but I got over it. At the end of the day we are lucky to have a company like Grizzly. I imagine most of us would have a lot less tooling in our shops if we all had to buy powermatic, jet, delta, or any of the other higher priced manufacturers tools.

Every manufacturer or distributor of machinery doesn't deliver they hire a delivery company that is probably the lowest bid so in this world where everyone is looking for the cheapest price (I'm in this group) the low bid isn't necessarily the most trusted and, efficient shipping company but the one that doesn't cut into the profit margin so that the manufacturers and, distributors can give you the product at the price point that they are offering. WE all bitch about Ikea kicking our asses on price point, we argue that our furniture/cabinets better and it probably is but, most people are looking at the bottom line. Most of us do exactly the same thing when buying tools If you could save $100 from one tool distributor over another which one do you click on to continue to check out and, do you click on standard shipping or a more expensive option? No 9 out of 10 of you go for the cheapest options(I'm in this group also) lets call this the Ikea option.

Sorry, that's ridiculous.  I can't tell you what Nikon or Bosch customer service is like but I've dealt with Festool, LN and Apple because of problems with their products.  No company is impervious to QC issues.  If you wrote off every company that ever had a problem, you'd have no one to buy from.

 

I agree. I've used Apple products all my life and while they are great and reliable, no company is impervious to QC issues as was stated. I've had to deal with Apple's customer service and can say that my Apple Care plans have been well worth it. I've had a complete machine replacement 3 weeks before the extended care ended no questions asked. Also have many machines that are still kicking after 6-7 years of use! 

 

I also have to say there is a difference between making adjustments from a factory product and having to keep making adjustments from a factory product. I expect that I may have to make a few adjustments here and there, who know's what shipping will do to a product. What makes a quality company for me is that the product does not need to be re-adjusted after the initial setup. That and customer service go a long way to making me like or not like a company. 

 

A company with excellent customer service and a product that works well after setup and continues to do so make me feel a company has a vested interest in meeting my needs in addition to making money off of me. 

  • Author

Get Real!!!  What manufacturing company would call any of their products CRAP.  I get the gist of what you are saying but it doesn't take a lot of common since to realize if a company had a expensive line and the same tools in a less expensive line which is going to be the better investment.  From everything I have heard about Grizzly it is a good company and a pleasure to do business with.   

I don't like the brand loyalty of stocking a whole shop with grizzly I would only show that kind of loyalty to powermatic and then I'd still buy a sawstop table saw

Sent from my SCH-i705 using Tapatalk

Get Real!!!  What manufacturing company would call any of their products CRAP.  I get the gist of what you are saying but it doesn't take a lot of common since to realize if a company had a expensive line and the same tools in a less expensive line which is going to be the better investment.  From everything I have heard about Grizzly it is a good company and a pleasure to do business with.   

I agree no one would want an inexpensive tool if it was of poor quality, Harbor Freight taught us that lesson.

I wonder why no one mentions Jet tools much on this forum. I haven't had the opportunity to use any Grizzly equipment but I have been happy with all the Jet machines I have bought or used.

My shop is a hobby shop that has no income coming in on it.  I woodwork because I enjoy it.  I wish I could buy nothing but super high end machines for my shop, but realistically I would be saving for so long that I would never get to make saw dust, at least not to to the level I want to work at.   I mentioned earlier that I have a band saw and jointer that I purchased from the within the last 3-4 years.  I also have a grizzly drill press that was given to me that was made back in 1992.  My oldest machine, by a long shot, is my table saw which I bought via Craigslist, and then made some improvements.  If had to replace it today, I would take a serious look at the Grizzly offerings, among other brands.

 

Do I buy Grizzly out of brand loyalty?  No.  I buy Grizzly because their cost is within my budget and is typically a step above other equally priced options from other brands out there, i.e., the best bang for the buck.  Here is my as honest as possible views of each of the Grizzly tools I own:

 

12" Drill Press - Its a decent machine.  When I got it I almost resold it because I had drill press, and it appeared the bearings were shot.  It turned out the problem wasn't the bearings, but the MT and chuck were very dirty so the bits were not well centered, appearing to have a wobble to them.  I cleaned everything up, and it is now dead on. 

 

G0555P 14" Band Saw - It is a great machine.  I am of the opinion that when it comes to band saws, Grizzly has it nailed.  With a good blade, the saw has done everything I have asked of it, including resawing, bowl blank cut outs, cutting tenons, ripping, and of course various curves.  The blade tracks extremely well, and as long as it is good and sharp I get no drift.  My only complaint about it is that the guide bearings included with it are noisy, but otherwise work well.  I wanted a good general purpose band saw, and that one has fit the bill.

 

G0654 6"x46" Jointer - This is their lowest priced floor model jointer.  Someday, when I finally am able to get the house power service updated, and I can get get 220V I will get a bigger jointer.  I scoured Craigslist for a long time to find a useable used machine at a decent price.  What I kept finding is that the machines were either a mess and would need a lot of work to get them useable, or they were at a price point that I wasn't willing to pay for a used machine.  So after much discussion with my wife, I decided to go with this machine.  The assembly of the machine took my most of a day, with some help from my son to help lift it.  The belt that came with it was junk, I could not get it tension properly.   Grizzly actually recommends buying a link belt for it, so I did.  In my quest to get the belt working on properly, I discovered the motor ran with a large rattle noise.  I did in fact talk to their customer support.  My only complaint is I had to take time off of work to do so as they do not have evening or weekend hours.   They first started out by asking me if I would be able to disassemble the motor and see if it was something easily fixed.  I didn't want to do this simply because, I have never done any motor repair, and was afraid that I could cause further damage.  The tech understood and sent me a new motor.  I got the new motor bolted up, with the link belt, and the machine ran smoothly.  I did some minimal tweaking to the alignment and got decent results.  I used it like this until I started noticing that I get some weird face planing patterns.  The planer usually took care of this so it was not a priority.  It wasn't until I tried to make a glue-up panel when I realized that I was getting a very slight belly in my edge joints.  I realized I needed to stop putting off the inevitable, and take the time to get it fully dialed in.  I got a pop can cut up as well as a good straight edge.  I got the outfeed table height readjusted which took care of the belly, and with about an hour or so of shimming, I got the tables coplanar.  I noticed immediately the difference in quality of both edge and face jointing on the machine.  My biggest complaint at this point is that the fence is a pain to adjust.  The positive stops on it are useless, so I don't use them, and just use a square to square it up each time I move it.  Overall, it is a decent value for what I paid for it, but if I were to do it again, I would probably pay the extra for G0452(P) for what appears to be a better fence design.

I wonder why no one mentions Jet tools much on this forum. I haven't had the opportunity to use any Grizzly equipment but I have been happy with all the Jet machines I have bought or used.

Steve, That makes me feel better. I've had a Jet ts for 4 or 5 years now and it gets more attention than my wife, but that may just be because it has an on and off switch :D It's kind of like a gun talk show here, they talk their Glocks and Kimbers and never mention my Beretta or Browning. Makes me think maybe I have entry level equipment :wacko:

Grizzly gets talked up so much because of their prices and their bang/buck ratio.  Jet is kind of in between Powermatic and Grizzly in quality and cost...kind of a Bermuda Triangle of woodworking machines...and I think they lose a lot of sales to the budget buyer going to Grizzly and the quality buyer dropping the extra dough for the PM.  I've never found myself in a position where a Jet machine made the most sense...but I haven't bought a lathe yet. :)

I wonder why no one mentions Jet tools much on this forum. I haven't had the opportunity to use any Grizzly equipment but I have been happy with all the Jet machines I have bought or used.

 

Things are in a constant state of change, but over the years there have been many tools where Jet and Grizzly models were cast and finished in the same factory.  That's not to say the end machines are identical, but are very similar in many cases.   Jet has a more traditional retail model that includes a strong dealer network, and a longer warranty than Grizzly, which adds a premium to the cost even in cases when the tools are nearly identical.  There's merit to both retail philosophies, and obviously a market for both, depending on individual preference.  Lower cost doesn't necessarily equate to lower quality for Grizzly, though Grizzly dabbles in more lower end tools than Jet does.  

 

Taiwanese contractor saws made by Mao Shan (Jet, Grizzly):

oldjet_zps5a75cd0a.jpg 42788d1334245026-grizzly-model-g-1022-wh

 

Taiwanese jointers made by Geetech (Griz, Jet, Sunhill):

G1182ZHW.jpg Jointer.jpg ole_blue_2.jpg

 

 

 

Cabinet saws: (Grizzly, Jet)

 g1023sl_trunnion.jpgjet-708663PK.jpg

Planers (Jet, Grizzly):

5ec91a42-11db-4d7c-bbbb-b3474cf4596d_zpsg0453.jpg

Jet owns Powermatic and the parent company owns several other equipment lines. A lot of machines share the same basic castings. It's the level of attention to quality while machining the castings and the motors, switches, accessories etc that differentiate one brand from another. I think some Jet and Powermatic machines share the same castings, but I bet only the ones that pass the higher standards get painted gold.

Grizzly gets talked up so much because of their prices and their bang/buck ratio.  Jet is kind of in between Powermatic and Grizzly in quality and cost...kind of a Bermuda Triangle of woodworking machines...and I think they lose a lot of sales to the budget buyer going to Grizzly and the quality buyer dropping the extra dough for the PM.  I've never found myself in a position where a Jet machine made the most sense...but I haven't bought a lathe yet. :)

 

When you put it that way I wonder if they've considered dropping Jet to place more focus on the Powermatic brand.  

Jet's sales margins must be high enough to keep them around vs. dropping Jet to focus on Powermatic (or focus elsewhere).  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.