wtnhighlander Posted November 30, 2014 Report Posted November 30, 2014 Due to the proliferation of reindeer throughout the forums, I decided to try my hand at one as well. It's a bit hacked, as my bandsaw skills are not very well developed. However, it's inherent adorability won me the aproval to purchase a spindle sander (yay!). I am planning on the Ridgid combo belt/spindle sander, unless someone can suggest a good reason to avoid it. Advice, anyone? 2 Quote
..Kev Posted November 30, 2014 Report Posted November 30, 2014 Classic! I've never played with the Rigid combo so can't comment. I do have a Grizzly belt/disc sander and a Grizzly bench top spindle sander. I don't use them terribly often but, I'm sure glad I have them when I need them! Quote
Llama Posted November 30, 2014 Report Posted November 30, 2014 I love the Ridgid combo unit. I actually have two of them. Quote
wdwerker Posted November 30, 2014 Report Posted November 30, 2014 I abused my first one mercilessly, when it finally died I went straight out and bought another ! Well worth the price, great tool. One of 2 ridgid tools in my shop . The other is the flip top outfeed support. Quote
Raefco Posted November 30, 2014 Report Posted November 30, 2014 I have looked at them a few times but I am always out of town when I do, I don't have a Home Depot near me and I haven't seem them anywhere else. You'll have to let's us know how you like it. Quote
AstroDave Posted November 30, 2014 Report Posted November 30, 2014 No problem Raefco... buy online...free shipping same price @ 199... you can have one of your own next week I just bought one myself but haven't unpacked it yet. Quote
Raefco Posted November 30, 2014 Report Posted November 30, 2014 No problem Raefco... buy online...free shipping same price @ 199... you can have one of your own next week I just bought one myself but haven't unpacked it yet. When I say near, I really mean convenient, I travel a lot for work and my busy season is coming, I'll pick one up in my travels... Quote
Dave H Posted November 30, 2014 Report Posted November 30, 2014 I love the ridgid you won't be disappointed. Quote
Tom Cancelleri Posted November 30, 2014 Report Posted November 30, 2014 Spindle sanders are invaluable. I picked up a pretty decent ryobi spindle sander on craigslist for 50 bucks a couple of years ago. I may also never need to buy sandpaper sleeves. About 5 years ago my dad bought 200 or so packs of Rigid 1/2" to 2" sanding sleeves for a penny a pack. He gave them to me, sadly after about 50% of them were damaged in a flood. If I can make a recommendation, I say get a big rubber eraser gum stick thing for cleaning the sandpaper. They look like this: Quote
wtnhighlander Posted November 30, 2014 Author Report Posted November 30, 2014 Yeah, I use the gum eraser on my belt and ro sanders, it really extends the working life of the paper. They work on files and rasps, too. Quote
Tom Cancelleri Posted November 30, 2014 Report Posted November 30, 2014 Never thought about using it on my saw tooth rasp. I use a file card to clean my files. I'll have to try the gum eraser Quote
drzaius Posted November 30, 2014 Report Posted November 30, 2014 I have the Ridgid sander & like it lots. Dust collection is pretty poor, but I built a shroud & now it's quite good. 1 Quote
AstroDave Posted November 30, 2014 Report Posted November 30, 2014 Drzaius would you mind sharing a pic of the shroud...sounds like a good idea... 2 Quote
wtnhighlander Posted December 1, 2014 Author Report Posted December 1, 2014 Thanks for the feedback, everyone. I went to my local HD yesterday, only to find they don't stock that sander at all. Dampened my 'fever' a bit, but I suppose I will place an order soon anyway. Quote
woodbutcher74 Posted December 1, 2014 Report Posted December 1, 2014 I picked up the Rigid sander about a month ago and love the the operation. That sucker will really eat some wood. Need to look for some finer grit belts, though. The only thing I'm a little disappointed in is the dust collection. Attached to my shop vac and there's still a considerable amount of dust in the air. Quote
DaveT Posted December 1, 2014 Report Posted December 1, 2014 Thanks for the feedback, everyone. I went to my local HD yesterday, only to find they don't stock that sander at all. Dampened my 'fever' a bit, but I suppose I will place an order soon anyway.You could always try the latest creation from Izzy 1 Quote
wtnhighlander Posted December 3, 2014 Author Report Posted December 3, 2014 Here is my little Comet, roughly sanded with a drill press drum (no spindle sander yet). He's a bit vertically challenged, due to the size of the scrap I had on hand. Material is walnut, air dried. Lots more sanding to do, these curves were a bit tight for a 1/4" blade. Eric, I totally get why you avoid the tails.... 1 Quote
..Kev Posted December 3, 2014 Report Posted December 3, 2014 Hey, the weeble wobble's need them too! Nice job! Quote
AstroDave Posted December 3, 2014 Report Posted December 3, 2014 I like it... and my wife now wants one... thanks "It's so cute honey... you can do that right?" Quote
DaveT Posted December 3, 2014 Report Posted December 3, 2014 I like it... and my wife now wants one... thanks "It's so cute honey... you can do that right?"Sounds like justification for some more tools Quote
wtnhighlander Posted December 3, 2014 Author Report Posted December 3, 2014 I like it... and my wife now wants one... thanks "It's so cute honey... you can do that right?" Sorry Dave! Quote
AstroDave Posted December 3, 2014 Report Posted December 3, 2014 No worries Wtn... as Dave said... good excuse for more tools 1 Quote
Tom Cancelleri Posted December 4, 2014 Report Posted December 4, 2014 No worries Wtn... as Dave said... good excuse for more tools Sounds like you need a 4 axis CNC and for good measure a laser cutter Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.