Chet Posted February 13, 2015 Report Share Posted February 13, 2015 I am getting ready to glue up some larger pieces and I have read were a number of you use an ink roller to spread the glue. Where did you purchase your ink roller and what is the clean up process? Thanks. Quote Link to comment Share on other sites More sharing options...
dwacker Posted February 13, 2015 Report Share Posted February 13, 2015 I really like the one that Joewoodworker sells. I found them a bit cheaper at a art store but might as well support the little guy. Clean in sink with hot water don't let it dry out. Quote Link to comment Share on other sites More sharing options...
Cochese Posted February 13, 2015 Report Share Posted February 13, 2015 This is what I use: http://www.amazon.com/gp/product/B0007ZJ8SI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Water will clean it up fine (Titebond, etc) as long as you do it while it is still wet. Once it dries, it is a disaster, but doesn't impact performance too much if you peel most of it off. Quote Link to comment Share on other sites More sharing options...
Brendon_t Posted February 13, 2015 Report Share Posted February 13, 2015 I bought a breyer at a local craft 2/ $7. Left tb 3 on one over night on accident. I soaked it in warm water for a while then used a hobby knife to cut a line and peeled it of like tp on the roll. Quote Link to comment Share on other sites More sharing options...
Trip Posted February 13, 2015 Report Share Posted February 13, 2015 ==>really like the one that Joewoodworker sells +1 He also ships quickly. Order on a Monday, I typically get it on Wednesday... ==>support the little guy +2 Quote Link to comment Share on other sites More sharing options...
thewoodwhisperer Posted February 13, 2015 Report Share Posted February 13, 2015 This is the one I've been using for years now and can't complain: http://www.amazon.com/gp/product/B0007ZJ8SI/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0007ZJ8SI&linkCode=as2&tag=thewoodwhispe-20&linkId=SK26MRVA4OJVNODD When using it, I usually fill up a little pan or bowl of water and drop the roller into the water in between uses. It's amazing how easy it is to forget about it and leave the darn thing on the bench to dry overnight. So having the water there is a good reminder and keeps the glue nice and soft until i have to to clean it thoroughly. Little video showing the one I use: Quote Link to comment Share on other sites More sharing options...
estesbubba Posted February 13, 2015 Report Share Posted February 13, 2015 I've found the acrylic ones clean up better than rubber: http://www.amazon.com/Speedball-4-Inch-Acrylic-Roller-Brayer/dp/B000BYVMFM/ref=sr_1_17?ie=UTF8&qid=1423856670&sr=8-17&keywords=plastic+brayer Quote Link to comment Share on other sites More sharing options...
TerryMcK Posted February 13, 2015 Report Share Posted February 13, 2015 +1 on Cochese and Marc ink roller. That's exactly the one I use. Quote Link to comment Share on other sites More sharing options...
Chet Posted February 14, 2015 Author Report Share Posted February 14, 2015 Thanks guys. I found the one Marc, Terry and Cochese mentioned at the local craft store today for about $8.00 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.