Recommended Posts

Posted

After many months of research and reading much advice on this & other forums, I've ordered a new SawStop 3HP PCS with a 36" T-glide fence.  My old saw has a 52" fence, which is nice to have about every few years, but takes up too much room.  I'm really not going to miss that extra 16".

 

They have the free mobile base promo that ends today.  When the base arrives the good folks at Lee Valley will allow me to exchange it for credit towards the ICS base, which is much nicer.

 

This is like Christmas x10!

  • Like 1
Posted

Nice work.  I agree, unless you use a lot of sheet goods or have a huge shop, a 36" fence should be plenty.  

Posted

Congratulations... I have the same saw with the 52" fence and must say I wish I had gotten the smaller fence given the size of my shop. You will love the saw...for me it was an upgrade from a portable contractors saw...so massive change.

  • Like 1
Posted

I'm upgrading from a 15 year old Jet contractor saw, which has been quite good, but has no riving knife, terrible (non-existent) dust collection & is lacking in power at times.

Posted

I just took delivery of that exact saw yesterday. It's still on the pallet in my shop until I can clear out enough junk to start setup. I too considered the longer fence but decided against it for space reasons. Why do you say the ICS mobile base is better? I thought the PCS base that they are including in the promotion got pretty good reviews?

Posted

The PCS base is really good, far better than any of the aftermarket mobile bases that I've seen.  But the ICS base has 4 swivel casters as opposed to 2.  With my shop layout, being able to steer with all 4 wheels is going to be a big help.

Posted

The PCS base is really good, far better than any of the aftermarket mobile bases that I've seen.  But the ICS base has 4 swivel casters as opposed to 2.  With my shop layout, being able to steer with all 4 wheels is going to be a big help.

 

That is a good point.  I position my saw so I only need to regularly move it in one direction (left to right).  From time to time I'd like to move without having to make a 90 degree turn and it is not easy, and I own the sawstop contractor model.  With a cabinet saw it would be even more difficult.  

Posted

I went with the 36 inch fence on my SawStop also.  I have had it a year now and haven't had a time when I wish I had the 52, and that includes starting out using the saw to make a number of pieces of shop furniture out of birch ply.

Posted

I have the same saw with 52" rails. Everything about this saw is amazing, even the instruction manual! Really impressive how well it goes together, the fit and finish, how easy it was to tune and of course how amazing it cuts! You are going to love it! Congrats!

Posted

Congrats on the new saw.....post some pics when it arrives!  

 

If you ever need more rip capacity, you can always just slide the front rail over to the right by one bolt hole....you usually gain 9" to 10" with no drilling, but it messes up your tape measure, and usually needs an extension table to fill the gap between the rails.

Posted

It's nice that the option to move the rails is there, but I really don't want to make it any bigger.  Lee Valley didn't have one in stock & are checking other branches so I don't know when it'll arrive.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.