Recommended Posts

Posted

The Stanley Handyman is unfortunately not worth a lot of money and I think the other plane is a made in England Stanley or a late model USA Stanley, neither of which are of a desired vintage if you will.

 

They could make decent users though the Handyman might be a bit of an uphill climb from a fettling perspective.

Posted

The Stanley Handyman is unfortunately not worth a lot of money and I think the other plane is a made in England Stanley or a late model USA Stanley, neither of which are of a desired vintage if you will.

That could make decent users though the Handyman might be a bit of an uphill climb from a fettling perspective.

im not trying to sell as much as I want too but they were my grandfather's!
Posted

If they were my grandfathers I,would clean them up a bit and put them on a shelf.

i want to clean them up and display them but also get them functioning so I can use them on special projects.

It looks like they are a no. 4 smoother and a no. 5 jack. I used the website referenced above to determine that.

Posted

Agreed that they are handyman planes. There was a bloke called Warren Mickley who won the hand planing event at WIA one year using a handyman plane. There is no reason why they won't work or equally they can be enjoyed on the shelf.

  • Like 1
Posted

im not trying to sell as much as I want too but they were my grandfather's!

 

Sorry, missed that.  If your grandfather was pretty active in the shop then the chances are they'll work fine. Cleam 'em up, hone the irons, and see what happens.

  • Like 1
Posted

Yes, sharpen them up and use them.

 

I just bought a Stanley #4, probably 25 years old, maybe a little older, and not worth more than the twenty bucks I gave the guy who Craigslisted it.

 

But the blade was OK and so was the rest.  I cleaned it up, got it scary sharp with the stones and compound, and it cuts .003 shavings nicely.

  • Like 1
Posted

Yes, sharpen them up and use them.

I just bought a Stanley #4, probably 25 years old, maybe a little older, and not worth more than the twenty bucks I gave the guy who Craigslisted it.

But the blade was OK and so was the rest. I cleaned it up, got it scary sharp with the stones and compound, and it cuts .003 shavings nicely.

I am going to call around to our granite shops and see if anyone has a cut off piece I can have to flatten the sole. I may buy new Hock blades pending the cost of them.
Posted

I am going to call around to our granite shops and see if anyone has a cut off piece I can have to flatten the sole. I may buy new Hock blades pending the cost of them.

 

Glass works great as well.

  • Like 1
Posted

I am going to call around to our granite shops and see if anyone has a cut off piece I can have to flatten the sole. I may buy new Hock blades pending the cost of them.

Spray adhesive, Table saw top and sandpaper!   Why go buy stuff you have already handy?

Posted

Watch some Paul Sellars videos on YouTube.  He shows how to sharpen blades and tune the tool.

 

Also watch WoodMan's video where he sure gets a  workout flattening a sole.

 

See what kind of performance you get from the blades you have before buying Hocks.  I have Hock blades in Krenov-style wood planes I made, but all my iron planes have stock blades.

Posted

Let Paul Sellars show you how.  A piece of granite tile from the store, some sandpaper, and there you go.

 

Paul is not a purist, but instead is a true woodworker.  The work done to ease the edges is important.

 

Posted

Let Paul Sellars show you how. A piece of granite tile from the store, some sandpaper, and there you go.

Paul is not a purist, but instead is a true woodworker. The work done to ease the edges is important.

do you know of anymore videos of his that he works on that number 4 plane? I don't know anything about planes or how to operate them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 64 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined