Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Please no, not another Roubo build thread

Featured Replies

So I am in my shop and I'm looking at this ungodly big stack of lumber and I'm thinking, if only the Roubo was done and all this lumber wasn't in the way. So I said ok lets start milling some lumber, how bad could it be. 

 

I hear in medieval times instead of throwing people in the stockades, they just subjected them to milling 8/4 lumber for Roubo work benches.  

 

I setup some rollers for infeed and outfeed to support the wood as I held it over the cutter head. 

 

First couple of things I noticed... jointing 9-10 foot boards is brutal, I was sweating before I finished jointing the face and edge of the first board. So I increased the depth of cut to about 3/32" to speed up the process (nothing was sped up) it just made it harder to push the boards across the jointer. My table top is smooth and slick, however my jointer is only 2HP, so clearly I need a 60 HP jointer. Also there's a lot of downward pressure needed to keep those boards on the table. 

 

I got through 3 boards and I was uncontrollably sweating, so I had to call a friend. Friend's name is Guiness, and it's smooth and delicious. If I can mill 3 boards a day, I'll still finish before Benchcrafted ships my hardware. I would like to get the top laminations glued up, I can't see the rest of the build being this brutal as the legs are smaller pieces to mill. 

 

It's Miller time, and/or Guiness time.

 

IMAG3397.jpg

 

IMAG3398.jpg

  • Replies 590
  • Views 62.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I'm guessing you would feel differently if they were forcing you to do something you didn't want to do.   I understand their intentions but, at the end of the day I won't have an HOA telling me what

  • Tom Cancelleri
    Tom Cancelleri

    and... I checked again just now because I'm insane

  • Dewald Swanepoel
    Dewald Swanepoel

    Haha. The hint that helped was that he's Japanese. Ishiwatari's name immediately popped to mind as I recently saw a song of his featured in the Playstation game, Rocksmith. Come to think of it, it cou

Posted Images

Never get tired of watching a good bench build!

Never get tired of watching a good bench build!

   "Watching" being the key word!

Ok fine, I'll let you complain about building a sweet ass bench that isn't on my list for at least another year. .

  • Author

Got another board done. Tomorrow is officially mill day. Gonna get all the boards milled. Bandsaw will be setup tomorrow for ripping to roughly 4 1/2" inches. Then off to the planer for much mess. I've filled 1 bag so far with chips from the jointer. This is my biggest project to date. 

 

IMAG3399.jpg

jointing a 4.5" board is easier than jointing an 8" board. just sayin'. :).

  • Author

jointing a 4.5" board is easier than jointing an 8" board. just sayin'. :).

 

No doubt, these boards are roughly 5 - 6" wide

Those are some big ass timbers. What kind?

You think you're sweating now, wait until July when you spread that bark mulch!

  • Author

Those are some big ass timbers. What kind?

You think you're sweating now, wait until July when you spread that bark mulch!

 

The wood is 9/4 soft maple, though sold as 8/4. The wood is oversized so you can actually get 8/4 once milled. Though some of the pieces require more jointing then others. 

 

That mulch has been getting used slowly but surely. I hate yard work.

Well one good thing about ANOTHER roubo build is that when i build mine i will be able to do it by memory and wont need to pay for the guild build....;)

Im a sucker for these builds! Im in!!!

Yep, the first stages of building the Roubo are absolute milling hades. Glad you got started, keep at it! :D

No doubt, these boards are roughly 5 - 6" wide

my bad..,, in my house I call that 8". don't tell my wife.

There will always be room for another Roubo thread.

 

Congratulations!!  Looks like you are off to a great start.

:lol: Mike.

 

Yep, lots of milling.  But it's all fun stuff after that.  BTW...this is the biggest project ANY of us have done, unless someone has built a house by himself.

 

It's a very gratifying build.  You'll start feeling all warm and fuzzy as soon as that front slab is assembled and you can fondle those condor tails.

  • Author

I'm sure as soon as the slabs are glued up, the rest of the project is gonna be pretty easy. Then I can fondle some condor tails.

Have you got your vise hardware yet?  What do you have planned there?

  • Author

Have you got your vise hardware yet?  What do you have planned there?

 

Vise hardware is still hanging out with Benchcrafted. I ordered it almost 2 weeks ago. Says ships in 2-3 weeks. Hopefully they get going and ship it soon.

They are a little slow to ship!  I've ordered a couple from them and I think they get a bit slower each time.

 

The cool thing is that you can download the instructions free so, it really shouldn't hold you up.

  • Author

The rest of my boards are 10ish inches wide. Those are heavy and need much ripping. But for now it's break time, and drink time.

966e54a92b5ef5aeb47d438a2e221915.jpg

  • Author

In other news, I've already filled 2 bags with chips from the jointer, and I still have the bandsaw and planer to go before the milling is done. I usually fill my dust collector once a month or so. My milling is usually one or two 4/4 boards for a project like a box or something. 

  • Author

Ripping 8/4 10 foot boards on the bandsaw is tough. Blade cuts fine, but keeping those unwieldy boards with the fence is hard work.

81d9c6a7ae251976e35f0dfb38836a50.jpg

Starting to look like a bench top.

d2b155dce85f33e887a28de59e979194.jpg

Sweat evaporation break

4ccc970cb66ab18c6829b8ad30805377.jpg

Sweet man. Did you find any tricks for ripping those long thin boards down on the band saw? It feels like a 10' board would be super easy to tweak just enough to bring it away from the fence.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.