Recommended Posts

Posted

For the last couple of years I have only had one blade for my LN 62, this worked fine for all of my bench plane operations up to this point and not needing more than one blade was kind of my mantra for awhile. I am building the outdoor bench and am using some African Mahogany that has some gnarly grain patterns in it and is giving me a bit of trouble. I broke down and ordered a second blade and put a 50 degree secondary bevel on it. It has worked out pretty well but there are some grain patterns that almost warrant the 90 degree blade. Anyway, Eric you were right all along, There is a need for a second and even third blade for the No. 62. I will probably just end up with a dedicated smoother at some point in the near future. 

  • Like 1
Posted

I am about to be wrong on a for a second time too. I have always hated the idea of a shoulder plane but I will tell you what, after cutting a bunch of tenons recently I wished I had a shoulder plane. Wrong twice in one day!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.