WoodlandRenovations Posted October 14, 2015 Report Posted October 14, 2015 Hello,I find my self in quite a predicament, my wife has been nice enough to allow me to purchase a new table saw since I made her a jewelry cabinet. I have recently been looking at the Grizzly G0715p Hybrid saw. Unfortunately I've seen my share of negative reviews. I was wondering if any one here would have any words of advice, for or against this purchase. Or if you would recommend a completely different table saw. My given allowance is around $1000 but maybe if I make my wife another project I can get a little more money. Thanks for your time and thoughts.David C. Quote
shaneymack Posted October 14, 2015 Report Posted October 14, 2015 This seems like a pretty sweet arrangement. You make something and your wife gives you an allowance? Amazing. I say keep building her stuff untill you have enough money for a sawstop. I gotta get me a sugar momma.... Quote
Cliff Posted October 14, 2015 Report Posted October 14, 2015 I love my table saw. It's a Delta 36-725. It's my belief that it's the best saw under $1000 you can get without being used. It has a very big following. I'd throw it in the garbage to get a Sawstop though. Quote
xxdabroxx Posted October 14, 2015 Report Posted October 14, 2015 I love my table saw. It's a Delta 36-725. It's my belief that it's the best saw under $1000 you can get without being used. It has a very big following. I'd throw it in the garbage to get a Sawstop though.I think I'm going to buy one of these soon, seems like the best deal under a grand. I have no desire for a sawstop however. I just don't see the need, none of my other power tools have a retracting blade thingy. I would buy a cabinet saw before a contractor sawstop saw. Quote
Barron Posted October 14, 2015 Report Posted October 14, 2015 I have an earlier version of the Grizzly Hybrid table saw. It has done everything I've wanted to do, from a Roubo bench, beds, chairs, to small boxes. No problems cutting hard maple or Purple Heart. It is from before the splitter became standard so I have to use micro jig splitters, and making zero clearance splitters takes extra work, but aside from those two things, I have been very happy. Quote
Chris H Posted October 14, 2015 Report Posted October 14, 2015 There are plenty of great saws out there. The Rigid 4512 certainly isn't the best saw on the market, but it does have some really nice features you won't find in it's price class elsewhere. You can also skip freight charges if there is a Home Depot around you, which can be substantial. I've had mine for a few years, and I love it. It will leave you a budget for a good blade, which is needed for any saw. Save $150 or so for a high end blade or two. Depending on your other shop options, you may be able to squeeze a second tool in with your budget too! Quote
wtnhighlander Posted October 14, 2015 Report Posted October 14, 2015 Whatever you decide, I highly recommend getting a saw with full cast iron extension wings. The added weight and rgidity help the saw run smoother. Stamped sheet steel wings just keep stuff from falling on the floor. 2 Quote
Chris H Posted October 15, 2015 Report Posted October 15, 2015 (edited) I've seen the weight recommendation before. I can't say I have ever noticed a need. That said, before the rigid I had a sears contractor saw, and I didn't know what I was missing until I upgraded. I suspect the same may be true here, though I can't budge that thing when the wheels are up, and it's flows buttery smooth across the shop with the wheels down. If your shop is in the basement, I can tell you the flight of stairs even with a couple guys, is going to involve some colorful language. Edited October 15, 2015 by Chris H Quote
Tpt life Posted October 15, 2015 Report Posted October 15, 2015 Happy with G0715P and know several others who are. I also have seen some bad reviews and suspect QC reliability. Certainly run every check you can to certify the saw if you buy it, but not every one is a lemon. Quote
knotscott Posted October 15, 2015 Report Posted October 15, 2015 (edited) Even though the G0715P has a great fence, enclosed cabinet, solid cast wings, and a recommendation from Wood Mag, many of them have suffered a systemic alignment issue that has affected several of the units. The guts inside the G0715P are very similar to those found the on the Ridgid R4512 and similar Cman 21833.....all have been plagued with similar issues. There have been numerous reports of the problem being solved, followed by numerous reports that the issue isn't fixed. If you get a good one, they're all very serviceable saws. If not, there's not a good fix....proceed at your own risk.I see 3 solid alternatives:1)The Grizzly G0771 hybrid has a different trunnion structure in a similar cabinet as the G0715P, has solid cast wings, and a functional but lesser fence. Slightly less money.2) Grizzly G1023RL (or G0690) for a bit more money. If you have 220v, these are both a significant step up in class IMO, and worth the extra $300-400. 3hp, industrial style cabinet saws with beefy underpinnings, lots of mass, great fences, and considerably more saw than the hybrid class offers. 3) Delta 36-725 - Less money, decent fence, steel wings, open style leg stand. Edited October 15, 2015 by knotscott 1 Quote
WoodlandRenovations Posted October 15, 2015 Author Report Posted October 15, 2015 Thanks you guys for all the help. Looks like ill be doing some more homework and a few more hunny do's to get a bigger allowance. Thanks again for all your help. Quote
ponderingturtle Posted October 19, 2015 Report Posted October 19, 2015 There are plenty of great saws out there. The Rigid 4512 certainly isn't the best saw on the market, but it does have some really nice features you won't find in it's price class elsewhere. You can also skip freight charges if there is a Home Depot around you, which can be substantial. I've had mine for a few years, and I love it. It will leave you a budget for a good blade, which is needed for any saw. Save $150 or so for a high end blade or two. Depending on your other shop options, you may be able to squeeze a second tool in with your budget too! The problem with it seems more like poor design for the stresses of shipping more than any actual issues with it once it is set up. So if you manage to get one that isn't damaged in shipping your are golden. Quote
SawDustB Posted October 19, 2015 Report Posted October 19, 2015 The problem with it seems more like poor design for the stresses of shipping more than any actual issues with it once it is set up. So if you manage to get one that isn't damaged in shipping your are golden. I bought one of these in June, and they've added a block of foam under the motor for shipping to help deal with this. Mine has been great as far as alignment goes, I love the saw. Then again, my previous one was complete junk, so it may all be relative. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.