Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tool Cart Cabinets

Featured Replies

  • Popular Post

For some reason, I have been really productive lately. This weekend, I finished a couple of tool cart cabinets. About a year ago, I upgraded my hollow chisel mortise from an old AMT unit that I inherited from my father. It had seen better days and I couldn't get spare parts for it, so the AMT went to a new home with another woodworker and I treated myself to the Powermatic bench top hollow chisel mortise. When I go it, I unboxed it and it sat around on various flat surfaces. I finally got tired of moving it around and designed a tool carts with storage under it. I included enough space below the bottom drawer to house my venturi vacuum pump and the vacuum bag that goes with it.

Construction is nothing special, just a bunch of butt joints held together with Confirmat screws and glue, (I really like those things when working with composite sheet goods). The material is gray Melamine to match other cabinets in my shop, with oak trim to hide the raw edges. Unfortunately, Lee Valley quit carrying the drawer pulls I like that have a shell pull and frame in one piece, so I used some cheap white plastic knobs until I come up with something better. The cabinet rides on locking casters so I can move it easily.

While I was at it, I made a matching cabinet for my oscillating spindle sander. With the drawers under each tool, I can keep all of the parts for that tool together.

5695589e79486_BenchtopMortiserandOSSande
 

Now all I have to do is finish a sharpening station, a drill press cabinet, a tool cabinet for under my workbench and an a cart for my Delta RC33 cast iron beast of a planner. But first, I better finish my wife's book shelves for her cookbook collection so I can prove I need all these tools. :D

nice work robby, question for you, do you ever change the grease in the bottom of that delta spindle sander and if so how often? i have one is why i ask           

15 minutes ago, treeslayer said:

nice work robby, question for you, do you ever change the grease in the bottom of that delta spindle sander and if so how often? i have one is why i ask          

Great question Dave. I bought one used from a friend that is probably 10 yo . I haven't had it apart and never thought about lube.

Those are great looking shop cabinets.  I like the oak trim detail.  It just gives it a shop cabinet feel...at least to me.  I like oak.

  • Author
1 hour ago, treeslayer said:

nice work robby, question for you, do you ever change the grease in the bottom of that delta spindle sander and if so how often? i have one is why i ask           

There's  grease on the bottom of the sander?! Not really. I don't use it very heavily, so I haven't worried about it. It just kind of hums along. Dang, now I have to look into it.

yeah, there's a cover underneath that you remove to grease the gears in there, i got a manual with mine (used also) it says to do PM on those gears once a year

  • Author
4 minutes ago, treeslayer said:

I got a manual with mine (used also) it says to do PM on those gears once a year

Oops. I better rush out and do it 8 times then so I can catch up.....

Thanks for bringing that up. I'll have to dig out the manual and check it.

just checked my manual, after 100 hours of use remove old grease and repack with new, i didn't do it because the guy i bought it from said he had just done it, but good to know to keep it running good

I like it. I have to make some shop carts some day. They would really help, too busy working on stuff to make stuff to work on!

  • Author
42 minutes ago, JosephThomas said:

Nice. What kind of casters did you get and where did you buy them from?

Hi, Joseph - Thanks for asking. I used a mix of casters. I bought some really nice 3 1/2" casters from Harbor Freight that I really like. They are rated at 250 lbs. and cost something like $5.50 each. The casters I got work so well that even with the 50 lbs. of cabinet and 75 lbs. of mortise, the 1/8" per foot pitch of my garage floor required wheel chocks. So I took off two from each cabinet and installed some locking 3 in. Everbuilt polyurethane caster with a locking brake that I got from Home Depot. They are the bright red casters you see as the front wheels in the picture and are rated at 175 lbs. each. They cost $7.97 each. Because two of the casters are 3 1/2" in diameter and the other two are 3" in diameter, I had to add a 1/4" spacer under the front wheels, which are the locking casters. I used the mix because the locking casters have too much of an offset between the spindle and the axle. I didn't want to risk tipping over an already top heavy cabinet if the wheels got in the wrong position.

4 minutes ago, d8nk said:

I like it. I have to make some shop carts some day. They would really help, too busy working on stuff to make stuff to work on!

Thanks! If you do and decide to use sheet goods for the case, take a hard look at the Confirmat fasteners. They hold like crazy and make assembling the case an easy thing. They work on particle board, MDF, Melamine and plywood. You have to drill a stepped hole first, but there is a special bit for it. They are so strong that the wood will fail before the joint.

56959bc70b1eb_ConfirmatScrewandBit1-12-1

Nice work Robby! Man, you sure pump out the projects!!

Sent from my SM-N910W8 using Tapatalk

Nice job on those cabinets.  

I was recently offered lots of particle board with black melamine exterior and I neither accepted nor declined the offer because I really had no idea what to do with the resource.  In the meantime, I was going to buy plywood to make some shop cabinets.  Well, you have given me a great idea and may have saved me a good amount of money.  So, thank you for sharing.  I think the first cabinet will be a rip off your your design (hope you don't mind) for my Powermatic Hollow Chisel Mortiser that is still in the box, waiting to be opened.

  • Author
8 hours ago, wnaziri said:

....... I think the first cabinet will be a rip off your your design (hope you don't mind) for my Powermatic Hollow Chisel Mortiser that is still in the box, waiting to be opened.

Rip away. It is just a bunch of boxes fitted together. One thing I did to hide the fasteners on the top is to make a lid trimmed with real wood that sits down over the structural top of the cabinet. The lid is held on by just the bolts of the machine mounted on top or a couple of screws from the bottom, so it can be easily replaced if necessary.

Also, because the material is basically particle board, I stack the walls on top of the floor so the joint is in compression instead shear. On carts that are going o be heavy, I frequently use one or two layers of plywood. The trim hides the edge.

Be sure to post pictures of you cabs when done!

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.