Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Grizzly really needs to have more faith in their products...

Featured Replies

  • Popular Post

d4c50a2be9024745610d15391ff0e413.jpg

They look like interesting machines to me. No need to beat yourself up, Grizz.

==>Grizzly really needs to have more faith in their products...

And more quality wouldn't hurt either... :)

 

  • Author
==>Grizzly really needs to have more faith in their products...

And more quality wouldn't hurt either... [emoji4]

 

True. But you get what you pay for - Grizzly is the Harbor Freight of industrial-level tools. Does it work? Yeah. Is it Powermatic? Nope.

Lumping all of Grizzly into one category is not fair.  Yes, some of their low-end stuff is not top quality.  However, they have a ton of higher end stuff that can compete with the likes of Powermatic.  And if you were to compare dollar to dollar, they easily beat Powermatic for many products.

  • Author

Lumping all of Grizzly into one category is not fair.  Yes, some of their low-end stuff is not top quality.  However, they have a ton of higher end stuff that can compete with the likes of Powermatic.  And if you were to compare dollar to dollar, they easily beat Powermatic for many products.

Oh, I have no ill will toward them! I love my Grizzly tools. I've got a bandsaw and an 8" jointer and couldn't be happier with them. They just lack some of the finesse that more expensive tools have.

Honestly I started this topic to make a lame joke, haha!

3 hours ago, Arrdenet said:

 

Oh, I have no ill will toward them! I love my Grizzly tools. I've got a bandsaw and an 8" jointer and couldn't be happier with them. They just lack some of the finesse that more expensive tools have.

Honestly I started this topic to make a lame joke, haha!

Id like a 20in griz planer and a 3hp griz shaper..How bad can they screw that stuff up?..:)

34 minutes ago, andrew-in-austin said:

Lumping all of Grizzly into one category is not fair.  Yes, some of their low-end stuff is not top quality.  However, they have a ton of higher end stuff that can compete with the likes of Powermatic.  And if you were to compare dollar to dollar, they easily beat Powermatic for many products.

I'd be interested in seeing a specific comparison, as this is not my experience at all, being an owner/previous owner of several machines from both companies.

  • Popular Post

==>How bad can they screw that stuff up?

When you make a joke, it helps to add the :)

 

 

 

33 minutes ago, hhh said:

==>How bad can they screw that stuff up?

When you make a joke, it helps to add the :)

 

 

 

Obviously, the joke was boring!;)

What is "I get jokes..."

Sent from my SM-G900V using Tapatalk

4 hours ago, Arrdenet said:

 

Oh, I have no ill will toward them! I love my Grizzly tools. I've got a bandsaw and an 8" jointer and couldn't be happier with them. They just lack some of the finesse that more expensive tools have.

Honestly I started this topic to make a lame joke, haha!

Mine lack finesse too, but what is more important is their ability to still do the job well in a decade or 2..they might not last near that long, who knows.  If I was sure they'd last, I'd have no problem putting up with the lack of finesse, as a part-time hobbyist.

4 hours ago, andrew-in-austin said:

Lumping all of Grizzly into one category is not fair.  Yes, some of their low-end stuff is not top quality.  However, they have a ton of higher end stuff that can compete with the likes of Powermatic.  And if you were to compare dollar to dollar, they easily beat Powermatic for many products.

What does 'dollar for dollar' even mean to you?  Does that mean if a $400 grizz lasts 2.1 years without issue and the $800 PM lasts 4 years you think you won?  It's really hard to compare like this because high-end tool value is measured in decades, lower quailty is measured in years.  I like my grizzly stuff, but I don't really plan on having it all in 20 years, like I would if I owned any PM machines...I hope we're all posting here in 15-20 years so we can see what tools have lasted...it won't matter much though, because they'll be manufacturing all new stuff by then.

 

@Arrdenet It is a funny post, sorry we all hijacked it with serious talk :)

Problem is some of us just dont have the cash for PM...I think my grizz tools will last just as long...Im still thinking about the shaper and plainer...I was asking how bad can it be?

1 hour ago, mat60 said:

Problem is some of us just dont have the cash for PM...I think my grizz tools will last just as long...Im still thinking about the shaper and plainer...I was asking how bad can it be?

I don't have the cash either :)  I'm also hoping my grizz stuff will last a long while, but my point was that it's too hard to draw a good statistically-significant conclusion about how long they will last since the machines last multiple years/decades.  One guy saying his grizzly stuff broke within a few years doesn't mean yours will...but, if I look around my local CL i see lots of 25 year old PM stuff that seems to still work, not as much stuff for other manufacturers....could be because PM was the big dog in the market at that time, could be because all the other brands have broken-down by now, hard to say. Also, how are we supposed to know if PM/grizz/etc are still making macines to that same quality they were 25 years ago (we don't/can't).

I have always loved the PM tools but Im also 55 Years old so Im hoping that the grizz and shopfox along with the rest of the junk  I have will  last as long as I do...It is funny when some really do get mad about tools.:)..If  I could only have one PM machine it would be a PM 37in wide belt sander..I been using a friends on big jobs in the past.....That is something that is well worth the extra cash..There is a lot to go wrong with a wide belt compared  to  a table saw ,,shaper or planer exc..I will also say I had a 3hp motor in my jet cabinet saw last me 3 years so I didnt make out on that deal..OH man..

I have always loved the PM tools but Im also 55 Years old so Im hoping that the grizz and shopfox along with the rest of the junk  I have will  last as long as I do...It is funny when some really do get mad about tools.[emoji4]..If  I could only have one PM machine it would be a PM 37in wide belt sander..I been using a friends on big jobs in the past.....That is something that is well worth the extra cash..There is a lot to go wrong with a wide belt compared  to  a table saw ,,shaper or planer exc..I will also say I had a 3hp motor in my jet cabinet saw last me 3 years so I didnt make out on that deal..OH man..

Sorry about the table saw :( these things happen. PM's 5 year warranty has tempted me a couple times for this exact reason

Sent from my Nexus 5 using Tapatalk

1 hour ago, JosephThomas said:

I don't have the cash either :)  I'm also hoping my grizz stuff will last a long while, but my point was that it's too hard to draw a good statistically-significant conclusion about how long they will last since the machines last multiple years/decades.  One guy saying his grizzly stuff broke within a few years doesn't mean yours will...but, if I look around my local CL i see lots of 25 year old PM stuff that seems to still work, not as much stuff for other manufacturers....could be because PM was the big dog in the market at that time, could be because all the other brands have broken-down by now, hard to say. Also, how are we supposed to know if PM/grizz/etc are still making macines to that same quality they were 25 years ago (we don't/can't).

Well, that's a good point: resale value. 

I'm comfortable saying that Grizzly makes great budget-friendly starter machines.  I own/have owned about a half dozen Grizzly machines, and when I first bought them I was under the delusion that they were lifetime purchases.  Unfortunately that's not the case and I've realized I'll have to upgrade most if not all of them as the years go by.  But at the time that I bought them, they were all I could afford and I got a lot of bang for my buck and built a lot of projects with them...the alternative was to buy used equipment or nothing at all.  So there's definitely a time and place for Grizzly machines and I'm still comfortable recommending them to people who are just starting out or who are on a tight budget (the better than nothing clause)...but to compare them to Powermatic is just not realistic.

6 hours ago, JosephThomas said:

What does 'dollar for dollar' even mean to you?  Does that mean if a $400 grizz lasts 2.1 years without issue and the $800 PM lasts 4 years you think you won?  It's really hard to compare like this because high-end tool value is measured in decades, lower quailty is measured in years.  I like my grizzly stuff, but I don't really plan on having it all in 20 years, like I would if I owned any PM machines...I hope we're all posting here in 15-20 years so we can see what tools have lasted...it won't matter much though, because they'll be manufacturing all new stuff by then.

 

@Arrdenet It is a funny post, sorry we all hijacked it with serious talk :)

What I mean is if the spend roughly the same amount of money on a machine, you will get more from Grizzly.  For example, you can get a 12" heavy duty jointer with spiral cutter head from Grizzly for $5125 (with shipping).  The closest Powermatic in price is $5350 and does not have a spiral cutter head.

Let's look at something less expensive, a $3000 jointer.  From Grizzly, you get a 12" medium duty one with spiral cutter head for $3070 shipped.  For Powermatic you get an 8" medium duty with spiral cutter head for $3059.  I'd rather have a 12" Grizzly than a 8" Powermatic.  It's far more capable and 50% heavier.  

Bandsaws: for $2945 shipped you can get the Grizzly extreme series 17" bandsaw, the one "the Schwarz" gave a glowing review.  For $2900, you can get a PM1500 saw, which is a damn nice saw, but not as capable as the Grizzly.

I could go on, but I hope the point is already made.  At the higher end of Grizzly, they compete extremely well.

Yeah you absolutely get more CAPACITY.  That has nothing to do with quality.

  • Author

Yeah you absolutely get more CAPACITY.  That has nothing to do with quality.

Plus, if the machine is boring it's no fun anyway.

14 minutes ago, Arrdenet said:

Plus, if the machine is boring it's no fun anyway.

You must be kidding again..:)

1 hour ago, andrew-in-austin said:

What I mean is if the spend roughly the same amount of money on a machine, you will get more from Grizzly.  For example, you can get a 12" heavy duty jointer with spiral cutter head from Grizzly for $5125 (with shipping).  The closest Powermatic in price is $5350 and does not have a spiral cutter head.

That's fine, I understand the argument. But as @Eric. said quality isn't the same as capacity / feature-set....by saying you're "getting more" its implied that they both last.  If you had to replace the grizzly every 5 years and PM lasted a full 20, would you still feel you got more value from grizzly?

My entire point was that we can't accurately predict these things, yet it has the single largest effect on the 'value'  we get from a machine.  And btw, I own a couple grizzly machines and don't own any PM stuff, so don't take my arguments to mean that I am some rich guy or a snob that thinks he needs only the best. I make do with what I can afford for now, but let's not pretend it's a cut and dry decision to buy the machines claiming to give you 'more bang for your buck.'

There is a hobby vs business aspect that seems to blur in a lot of these discussions. As a hobbiest, I am a little nervous about my Grizz because I never want to need to replace it. If this were business for me, I only need it to last through enough production to replace it properly. This is where project load and capacity drive the decision making process. If you need bigger to complete a project, buy bigger and cheaper. Just do it with open eyes to the potential shortfall. 

51 minutes ago, JosephThomas said:

That's fine, I understand the argument. But as @Eric. said quality isn't the same as capacity / feature-set....by saying you're "getting more" its implied that they both last.

 If you had to replace the grizzly every 5 years and PM lasted a full 20, would you still feel you got more value from grizzly?

Of course not, but there's nothing to indicate the PM wont crap out in 5 years either.  I agree quality is important, but looking at the machines I gave for example, I don't think there's anyone here who can state confidently that one brand, will last longer than the other.

Now there are some very old PM machines out there that clearly have lasted a long time.  Those are however not made in Asia, and have nothing related to the machines they make today.

Personally, my preference is to find those old US made machines, as many of them do last.  But PM is not at the top of my list.  The likes of Oliver, Northfield, L Power, Crescent, and Tannewitz are.

31 minutes ago, andrew-in-austin said:

 I don't think there's anyone here who can state confidently that one brand, will last longer than the other.

 

I honestly believe any PM will last longer than Grizz..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.