Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Slab finishing

Featured Replies

I am pumped.  I just got my first live edge board.  My wife of course expextes it to be finished in the morning.  I am a little more conservative.

My dilema is my history.  As a 20 something I worked for a local paint company.  40 years ago we told people that shellac was passe and lacquer was unavailable.

Thant among other myths has stayed with me, but everything I read nd see today say that was BS.  I want the slab to stay as beautiful as it is.  I'm thinking that I want to use either clear or amber shellac as a base coat, and finish it with either satin lacquer or Arm-R-Seal.  I would like to get a consensus from you guys .Anyone want to chip in?  Thanks

20160224_161408.jpg

Amber shellac only if you like the orange color. Otherwise, I might lean toward just lacquer, no under coat, for clarity. I would normally suggest gloss lacquer, then buff to the desired sheen with steel wool, but maybe that isn't practical on a live edge.

You didn't mention what the slab will be used for?

Orange shellac and arm r seal will really change the color. Blonde shellac and lacquer will warm it a little without being too dark. I don't do lacquer so I personally would do blonde shellac followed by water based satin. 

I'd use a waterborne finish if you want to retain the color. 

 

If you want to really retain a natural look you could use a dull finish or rub your finish back with a gray abrasive pad. A water based finish will change the color the least.

What's the intended use?

If the use is light then I'd tend to agree with Mel for the sake of keeping the color.  If you need more protection from use then I would just shoot the lacquer

Neat looking slab! What kind of wood is it? I did a live edge coffee table a couple of years ago of pecan and used nothing but Arm-R-Seal. A couple of mullets on here convinced me that it was Gods gift to finishes and I still agree.

19 minutes ago, K Cooper said:

What kind of wood is it?

Looks like Ambrosia Maple. Interesting little creatures. Excerpt, taken from Wikipedia-

Ambrosia beetles are beetles of the weevil subfamilies Scolytinae and Platypodinae (Coleoptera, Curculionidae), which live in nutritional symbiosis with ambrosia fungi and probably with bacteria. The beetles excavate tunnels in dead trees in which they cultivate fungal gardens, their sole source of nutrition. After landing on a suitable tree, an ambrosia beetle excavates a tunnel in which it releases spores of its fungal symbiont. The fungus penetrates the plant's xylem tissue, digests it, and concentrates the nutrients on and near the surface of the beetle gallery

Looks like flamed box elder, of course isn't box elder a type of maple and it looks like ambrosia maple except red streaks instead of black.  Either way, nice slab.  This one guy on another forum has the craziest flamed box elder I've ever seen, magical looking stuff haha.

You may be/probably are right. I've used it several times, only from select boards from Rockler, but have never seen a slab of it. I bet that's high dollar, based on what I paid per bf!

In the commercial lumber trade ambrosia maple is a downgrade/ defect. When it is selected out for sale to woodworkers as a specialty somehow the price goes through the roof. 

If you start looking at yards who sell to cabinet shops and look through the defect /sale pile. I have gotten some beautiful ambrosia boards that way. Still haven't figured out what to do with them yet .

1 hour ago, K Cooper said:

What kind of wood is it?

Tree wood. ;) Hard wood... hehe

I would go with general finishes high performance poly.  Spray if possible.

  • Author

WOW, I've never had so many good responses to a post on any forum.  Thanks, guys.

I am cutting off the bottom to claen it up.  I want to see the difference from all of the finishes is.  I've used Arn-R-Seal before with very good results, but I am hoping to "pop" the grain and spalting as much as possible.  I've never seen amber shellac so I want to sample that.  I may also try a 50/50 mix of blone and amber.  Probably follow that with a few coats of either satin lacquer or Arm-R -Seal.

BTW - The slab is Spalted Maple that I sourced locally.  Loved the guesses.  Thanks to all.

Bob

I get mine from Highland Woodworking. And I forgot to mention the wax issue on another thread.

super blonde

blonde

amber

garnet

several levels of color and prices too, super blonde is pricey!

  • Popular Post
1 hour ago, wdwerker said:

 super blonde is pricey!

I've found that most are?

Bob wax, what did you end up doing with your maple slab? I just got one myself and want to keep it natural looking like you, but don't want it to yellow. Let me know how you made out please!!

  • Author

After all was said and done,  I decided on Arm-R-Seal.  It is a little darker than I wanted,  but it's still a beautiful plank.   I'll post pix after its done. 

With the nature of this slab,  I think clear lacquer would have been a better choice.   But hindsight.... 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.