collinb Posted April 5, 2016 Report Posted April 5, 2016 What is the general consensus regarding the SawStop CNS-SFA fence? Quote
Popular Post Brendon_t Posted April 5, 2016 Popular Post Report Posted April 5, 2016 Not enough bailing twine for my liking. 3 Quote
minorhero Posted April 5, 2016 Report Posted April 5, 2016 I just bought a sawstop and originally was going to buy the aluminum fence. Upon seeing it in person I immediately upgraded to the t glide. The aluminum fence reminded me a lot of my old ridgid contractor saw fence. It's not unusable. But it is inferior to the t glide. If you are buying a sawstop it's worth the extra 170$ for the upgrade. Quote
Dknapp34 Posted April 5, 2016 Report Posted April 5, 2016 Never used the aluminum fence, but I can tell you that the t glide is excellent. 1 Quote
collinb Posted April 5, 2016 Author Report Posted April 5, 2016 1 hour ago, Brendon_t said: Not enough bailing twine for my liking. You prefer duct tape? Quote
knotscott Posted April 5, 2016 Report Posted April 5, 2016 That's a pretty modest fence IMO. You can add a Delta T3 for $183 from HD,...find a coupon and you're really close in price for a much better fence. For easy reference for everyone - Here's the SS fence you mentioned: Here's the T3: Quote
collinb Posted April 5, 2016 Author Report Posted April 5, 2016 26 minutes ago, Mike. said: I have that sawstop fence. it is ok but not great. You need to check it for parallel everytime you move it. Often times the rear side of the fence will register on a different plane from the front. I would not spend any money on it. My goal is a little different than that. There's a new, unused one on CL locally for a "real good price" that I'm going to pick up to resell. My Accusquare will serve me hell for a while even though it's not the heftiest of fences. Quote
Tom Cancelleri Posted April 5, 2016 Report Posted April 5, 2016 15 minutes ago, collinb said: My goal is a little different than that. There's a new, unused one on CL locally for a "real good price" that I'm going to pick up to resell. My Accusquare will serve me hell for a while even though it's not the heftiest of fences. Unless he's pretty much giving it away and you know you can sell it at a decent profit I wouldn't bother. Consider the amount of time and energy it will take you to actually move the item. Things like that can be tricky as there isn't a huge "SawStop Restoration" market, and almost all people with a decent table saw have a pretty good Biesemeyer style fence. Quote
collinb Posted April 5, 2016 Author Report Posted April 5, 2016 Just now, Tom Cancelleri said: Unless he's pretty much giving it away and you know you can sell it at a decent profit I wouldn't bother. Consider the amount of time and energy it will take you to actually move the item. Things like that can be tricky as there isn't a huge "SawStop Restoration" market, and almost all people with a decent table saw have a pretty good Biesemeyer style fence. I see them going on eBay for a fair sum and for what he is selling it for I can justify it. Quote
drzaius Posted April 5, 2016 Report Posted April 5, 2016 I really don't understand why SawStop would even offer that fence on the PCS. It really is not good. Lots of flex. Even when perfectly set up, even moderate side pressure causes it to deviate badly off square. Quote
collinb Posted April 5, 2016 Author Report Posted April 5, 2016 My goal is a little different than that. There's a new, unused one on CL locally for a "real good price" that I'm going to pick up to resell. My Accusquare will serve me hell for a while even though it's not the heftiest of fences. Unless he's pretty much giving it away and you know you can sell it at a decent profit I wouldn't bother. Consider the amount of time and energy it will take you to actually move the item. Things like that can be tricky as there isn't a huge "SawStop Restoration" market, and almost all people with a decent table saw have a pretty good Biesemeyer style fence. I have seen enough people running old Craftsman saws with the original that I don't think it til be a difficult sell of the price is right. Sent from my MotoE2(4G-LTE) using Tapatalk Also it is useless without the rails. If the rails are not included then I definitely wouldn't buy. But overall I agree with tom, it will be a difficult sell. Of course I am not going to get it if it is incomplete. Duh. Sent from my MotoE2(4G-LTE) using Tapatalk Quote
Chet Posted April 5, 2016 Report Posted April 5, 2016 58 minutes ago, drzaius said: I really don't understand why SawStop would even offer that fence on the PCS. It really is not good. Lots of flex. Even when perfectly set up, even moderate side pressure causes it to deviate badly off square. Frank I think this come on the contractor saw if I am not mistaking. Quote
drzaius Posted April 5, 2016 Report Posted April 5, 2016 24 minutes ago, Chet K. said: Frank I think this come on the contractor saw if I am not mistaking. It's standard on the 1.75 HP PCS as well. T-glide is an extra cost option. Quote
Chestnut Posted April 5, 2016 Report Posted April 5, 2016 20 minutes ago, drzaius said: It's standard on the 1.75 HP PCS as well. T-glide is an extra cost option. This is one of the small turnoffs for me on sawstop. I really like that Powermatic just has 1 fence for their table saws. Well 2 fences but the same design just different sizes. Quote
knotscott Posted April 5, 2016 Report Posted April 5, 2016 1 hour ago, drzaius said: It's standard on the 1.75 HP PCS as well. T-glide is an extra cost option. The SFA30 fence is the stock option on the contractor saw, the "Premium" (wishful thinking) fence is the stock option on the PCS, and the T-Glide is stock on the ICS. The T-Glide is optional for the contractor saw and PCS. The T-Glide is the only fence that really has any appeal to me on saws in this price range. Quote
drzaius Posted April 6, 2016 Report Posted April 6, 2016 4 hours ago, knotscott said: The SFA30 fence is the stock option on the contractor saw, the "Premium" (wishful thinking) fence is the stock option on the PCS, and the T-Glide is stock on the ICS. The T-Glide is optional for the contractor saw and PCS. The T-Glide is the only fence that really has any appeal to me on saws in this price range. Thanks for setting that straight. I'm not familiar with the SFA30 fence, so can't comment on it. The "Premium" most definitely is not premium. Quote
Bulldog Posted April 9, 2016 Report Posted April 9, 2016 So eBay already told you that it's worth buying, why ask for people's opinion? Duh. Quote
collinb Posted April 9, 2016 Author Report Posted April 9, 2016 I understand what you're getting at. No offense taken and my apologies if my response came across wrong. Sent from my MotoE2(4G-LTE) using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.