Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Arched cedar garden bridge

Featured Replies

  • Popular Post

So this journal should be pretty short. I debated doing one, since it's not exactly fine woodworking, but this is where my shop time is going right now. My mother in law's birthday is in a couple of weeks, so I made the foolish suggestion that she might like a decorative bridge for her garden. She's very much into rustic type things...

Anyway, I came up with a very basic arched design. I decided to used bent lamination for the main supports, using gorilla glue (good for outdoors and won't creep). Here's the first glue up.

10df5441b880d27362d61fb1fa14518e.jpg

I learned a few things:

1. I hate gorilla glue

2. I put on too much gorilla glue

3. I need to work faster on these things

The glue up went OK, but there was a lot of squeeze out to clean off.

e55503b8428901bce4c449264caff520.jpg

Next, I had a lot of sanding to do. I had to drop to 60 grit to clean it off.

60f89968b2680b1274db9ad0eb853492.jpg

Then it was time to make slats. I'm mostly using left over deck boards from a few years ago when I built my deck.

e0a6a08189566bf62fbe17e3821ed894.jpg

And all ripped and cross cut to size.

7e07ad60f08c6dd4a9f39623aa885945.jpg

  • Author
Looks like a fun project. What kind of wood did you use in the arches ?

The arches started out as red cedar 2x6. I ripped them down to 1/4 inch strips for the lamination. I'm having fun with it so far... Kind of nice to have a simple project.

Cool project. I need to learn to shut my mouth sometimes on suggesting projects so i know what it's like. At least this one is pretty simple and it seems like a nice change of pace. I look forward to seeing the finished product!

Yeah i don't know who buys gorilla glue honestly. Almost all of the wood workers i know personally use titebond. On here it seems that people use titebond or epoxy.

Project is looking very good so far. Look forward to seeing this progress. 

I think that gorilla glue actually gets it's name from the fact that it leaves your fingers and hands a greenish brown color. 

 

  • Author

After a little quality time with a round over bit, I'm ready to look at assembling. I know they're almost a bad word around here, but I think the pocket hole jig with outdoor screws is the way to go here. Likely with some construction adhesive for good measure.

067970f3d1e5c36d15d0fa4745d99987.jpg

  • Author
Next time you use Gorilla Glue, wrap the piece with stretch wrap before clamping. GG doesn't need air to cure, and the wrap keeps the mess under control.

That's a good idea. I did put plastic around it to keep glue off my clamps and the form, but it still foamed at the joint. It was far worse on the first one, because I had about 50% more glue.

  • Author

A bit more progress last night. I sanded the slats up to 120 and started marking and drilling all the pocket holes. I'll have another round of that tonight then hopefully clamping and assembly. I still haven't totally figured out the little rails that will be at the sides... Probably need to cut more stock to bend.

  • Author

I finished drilling pocket holes last night and started assembly. It seems I can't count, because I just realized I'm one slat short. I also need more screws to finish, so it's off to the store today. Here's where things stand.

c764f7bf8e70b50b2b710575a3a4eefd.jpg

I'll see how it looks after I get the rest of the slats on. I'm still torn on whether to put any sort of rail on the sides.

I agree as to scale. Find a picture of an arched bridge w railings and make your railings appear proportional. The only time the railings will look out of scale is when someone is on the bridge, otherwise it will appear just a little more distant than it is.

Sometimes the best way to scale is to draw it full scale on a sheet of MDF.

  • Author

The bridge is only about 3 feet long, so full size railings would look too big. My wife still really likes the toe rail idea, so I cut more strips today to laminate for it. I only had about half an hour though so not much more progress.


The mini railing would work for me, but I'm not the final design authority on this one [emoji6]

The curve for a toe railing could also be used as a mini handrail. You could figure out a proportional height and mock up 4 posts to look at it. In the yard from a distance I bet it would look wicked.

  • Author
7 hours ago, wdwerker said:

The curve for a toe railing could also be used as a mini handrail. You could figure out a proportional height and mock up 4 posts to look at it. In the yard from a distance I bet it would look wicked.

That's a good idea, Steve. I'm hoping to laminate the pieces tonight, so I may try that tomorrow.

  • Author
  • Popular Post

And gluing up the rails for the sides. This took every clamp I own, pretty much.

0ffb57a401035314a04b24d60e625759.jpg

Looks awesome!  You just never have enough clamps!

Looks great Brian! Looks like every clamp in your shop joined the party !!

Sent from my SM-N910W8 using Tapatalk

  • Author

Thanks guys! Obviously I need more clamps... Other than pipe clamps and edge clamps, that's all of them.

I clamped up the rails so they would work as the toe rail. I'll probably try mocking them up a couple of ways before I attach them. I just used the bridge as a form; nothing's attached. Apparently this is likely to have flowerpots living on it, so the handrail may not fly with my customer.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.