Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

childs folding chair

Featured Replies

  • Popular Post

i had a request a while back to do a journal on one of these chairs and some friends just had their first grandchild, so this one's for you coop

 

 left and right arms DSCN0242.jpgDSCN0245.jpgseat left and right with groove for slats

 DSCN0246.jpgmy set-up for making the groovesDSCN0248.jpgback left and right with grooves for back slats

DSCN0244.jpg

  • Replies 73
  • Views 14.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • treeslayer
    treeslayer

    i had a request a while back to do a journal on one of these chairs and some friends just had their first grandchild, so this one's for you coop    left and right arms seat left and right wi

  • treeslayer
    treeslayer

    a friend gave me a couple of pieces from his broken one he had as a child, the rest i reverse engineered from pictures i found on the internet, lots of trial and ERROR to get it right. i can still hea

  • treeslayer
    treeslayer

    metal work today, man i hate working with that stuff, start with 1 3/4" square tubing cut 1" pieces on the TSdrill all necessary holes cut to 1 1/2 length again on the TSround the cut off ends on the

Posted Images

This looks really cool ! Did you buy the plans for this somewhere?

Sent from my SM-N910W8 using Tapatalk

  • Author
  • Popular Post

no plans shane, kind of reverse engineered it from a picture i saw of a similar chair from the 1950's and thought it would be cool to build for the grandkids. tons of trial and error to get it right but i've made about 30 of them now and have my time down to about 7 hours per chair. i will post some pictures of the templates ross, kind of new at this journal thing and will add more detail as i go along, thanks for looking

These are looking great!  Maybe you could sell the templates ;)

 

If you have built 30 of these I would love to see the templates and watch over your shoulder as you build one !  Just think of what questions you would ask if you were interested in building one. That's the way to do a journal.

  • Author

great advice steve, i will put it to good use tomorrow when i start up again and post some more

This is going to be really cool Dave! Thanks for the journal. If this comes out as well as I suspect, I may try and talk the wife into having another little so I can build one?

  • Author

thanks for the little push to do a journal on this project coop, it's my first one and i hope i can do it well, little ones are for the younger crowd, but grandkids are another story, they're great

  • Author

ok, i swear i haven't slacking, i have a few pictures but i keep getting a message  -200 and says upload failed, tried command-R, no luck, tried drag and drop and choose files, nothing. will try tomorrow

It took me several attempts to figure out posting pictures. I had to download an app that let me resize the picture to get under the max size limits. I post from my iPad so I am no help with other formats. Lord knows there is no shortage of tech experience around here.

  • Popular Post
On ‎5‎/‎19‎/‎2016 at 10:11 PM, wtnhighlander said:

Yeah, be sure to let us know how THAT conversation goes!

Since we can't get any progress pics from Dave, I thought I would share my progress. Her side of the conversation, cleaned up quiet a bit went something like: "Are you friggin crazy? Stay the heck away from me!" I took that to mean more shop time for me! Now I have all the more reason for getting my tools (except for one) dusted off. Thanks Dave.

  • Author

DSCN0252 copy.jpgsetup for making a 1/2" round on a 3/4" square the small kerf helps to define the shoulder when i cut the tenon, on the chair there are 3 different length of tenonsDSCN0255 copy.jpgDSCN0256 copy.jpground them to 3/4" using a 3/8" round over bitand them on the RO until nice and smooth radius the ends of all the pieces on the spindle sanderDSCN0259 copy.jpgslightly radius the sides with a 3/4" round over bitDSCN0260 copy.jpg32 pieces, 13 seat slats, #3 1 1/2" X 1/4" pieces for the back, #6 3/4" round pieces with the ends cut to 1/2" different lengths, 2 arms, L&R seat pieces, 4 legs and 2 back support pieces not many templates, just drawings to help me DSCN0261 copy.jpgDSCN0262 copy.jpgtoday will be metal working day, aluminum is used for arm brackets and rear leg support, man i hate working with metal,  

DSCN0253 copy.jpg

DSCN0257 copy.jpg

DSCN0258 copy.jpg

Dave, The cutter and jig setup are really cool. I didn't know such an animal existed. Great progress so far.

  • Author

thanks ken, i think that cutter is from rockler, woodcraft has one that i think is a little better, they come in different sizes (diameter and length). i had to have the neighbor put my drill press table on his lathe and turn the diameter of the hole bigger so i could get a 3/4" square piece thru it in order to make the jig work

  • Author
  • Popular Post

DSCN0263.jpgnot much progress today, life kind of got in the way-out i did get some dry fitting done, DSCN0264.jpgthis is the top of the seat underside of the seat, center round is glued in, front and back pieces have to be loose to spin when the chair is folded upDSCN0265.jpgDSCN0266.jpgthe back of the chair, the top piece will be laser engraved with the childs name

  • Popular Post

Dave this chair looks really awesome. I can't wait to see how it works. Hurry up and git er dunn already!

Sent from my SM-N910W8 using Tapatalk

i am with Janello, this is excellent!

makes me realize how much i don't know - 7 hours per chair ? it would take me 7 months to make one really bad one!:D

  • Author

hey steve, the curved sides are and arms i use double stick tape and pattern router them from the templates and drill the holes while stuck together. as for the groove i thought about that one for a long time, i could have made a template of some sort and used a router and guide bushing but it got kind of stupid because the parts are so small, how to hold them ect. so i settled on what you see. a piece of particle board with a 1/4" dowel 3/8" of an inch away from a 1/4" spiral up-cut bit. i mark start and stop points and plunge in, i keep the cut square to the curve and it seems to work pretty good, i know there are 10 different ways to do this but my head hurt overthinking it, Ross, there are only two templates one for the arms and one for the sides, the rest comes off of my printDSCN0247.jpgDSCN0246.jpgDSCN0242 copy.jpgDSCN0244 copy.jpg

  • Author
  • Popular Post

metal work today, man i hate working with that stuff, start with 1 3/4" square tubing DSCN0269.jpgcut 1" pieces on the TSDSCN0270.jpgdrill all necessary holes cut to 1 1/2 length again on the TSDSCN0272.jpground the cut off ends on the belt sander, the long pieces are the rear leg supports  DSCN0273.jpgprime and paint, i like the dark green with the cherryDSCN0274.jpgprime and paint, like the dark green with the cherry, slight delay of game while i wait for bolts from the Bolt Depot and get the top laser engraved, 3-4 day wait and i should be able to finish this up

DSCN0271.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.