Popular Post ..Kev Posted November 21, 2016 Popular Post Report Posted November 21, 2016 Saw this in the news this morning and thought I'd toss it up for you guys.. Massachusetts construction worker killed after saw hits him in throat Authorities have identified a construction worker who was killed in Massachusetts when a power saw he was using kicked back and hit him in the throat. The Plymouth County District Attorney's Office says 28-year-old Jason Sanderson, of Carver, and another worker had been excavating an underground water line in a trench when the incident happened Saturday afternoon in Duxbury. Investigators say they believe the chop saw he was using "became bound" and jolted back at him, making contact with his neck. Sanderson was pronounced dead at a hospital. Authorities say foul play is not suspected. The name of the company Sanderson was working for hasn't been released. The incident is being investigated by the Occupational Safety and Health Administration. 3 Quote
shaneymack Posted November 21, 2016 Report Posted November 21, 2016 Wow, that is pretty gruesome. First time I've ever heard of a chop saw causing death. Not sure I understand how that happened. Sent from my SM-N910W8 using Tapatalk Quote
..Kev Posted November 21, 2016 Author Report Posted November 21, 2016 Just now, shaneymack said: Wow, that is pretty gruesome. First time I've ever heard of a chop saw causing death. Not sure I understand how that happened. Sent from my SM-N910W8 using Tapatalk Yea, I'm not quite sure either and we all know how the news reports things before all the facts are in. Regardless, it's a good reminder to practice good shop safety. Quote
Guest Posted November 21, 2016 Report Posted November 21, 2016 Yikes It was probably a hand held cut off saw, like this. I know the article says "chop saw", but that is just slang for a bunch of different saws. When I worked in construction, for a piping company, they called that type of saw a "chop saw". https://www.milwaukeetool.com/power-tools/corded/6185-20 Quote
Eric. Posted November 21, 2016 Report Posted November 21, 2016 That's why you don't cut rough lumber with a chop saw...whoever asked a few days ago. 2 Quote
Llama Posted November 21, 2016 Report Posted November 21, 2016 Great, flesh sensing technology on everything now. I'm sure someone is getting sued. Quote
Tpt life Posted November 21, 2016 Report Posted November 21, 2016 Chances are this was a gas powered cutoff. Electric in a water trench is rare. This image from Google is like what I cut water pipe with in a previous career. They have a rotational torque on startup and spin down. You are constantly pushing against that force while running the tool. 1 Quote
BonPacific Posted November 21, 2016 Report Posted November 21, 2016 12 minutes ago, C Shaffer said: Chances are this was a gas powered cutoff. Electric in a water trench is rare. This image from Google is like what I cut water pipe with in a previous career. They have a rotational torque on startup and spin down. You are constantly pushing against that force while running the tool. This seems more likely than any stationary tool, given the line "...believe the chop saw he was using "became bound" and jolted back at him..." Those giant hand-held cutoff saws scare the hell out of me. Quote
Tpt life Posted November 21, 2016 Report Posted November 21, 2016 I have never had a close call with a blade as my instinct is to push out. I have contacted some things I shouldn't in the first few uses. I doubt that the blade hit him. I realize there is no value in the speculation, but likely the handle struck his throat and crushed his larynx. A bound blade does not bounce back but rather spins the saw around the spindle. Most of us have nearly broken a wrist when a drill bit sticks. The principle is the same. 1 Quote
Brendon_t Posted November 21, 2016 Report Posted November 21, 2016 Time for sawstop to buld a chopsaw.... Too soon? Quote
Chet Posted November 21, 2016 Report Posted November 21, 2016 51 minutes ago, C Shaffer said: Most of us have nearly broken a wrist when a drill bit sticks. Yup! 1 Quote
CandorLush Posted November 21, 2016 Report Posted November 21, 2016 1 hour ago, C Shaffer said: Chances are this was a gas powered cutoff. Electric in a water trench is rare. This image from Google is like what I cut water pipe with in a previous career. They have a rotational torque on startup and spin down. You are constantly pushing against that force while running the tool. Found a news link with one of these getting pulled out of the trench the guy was in so you are spot on. Quote
Unknown craftsman Posted November 21, 2016 Report Posted November 21, 2016 I bet it was a gas powered cutoff saw.I used to run one on the roof cutting concrete and clay roofing tile.Sometimes way up on a tower harness and rope. Ya I'm a badass Aj 1 Quote
Marmotjr Posted November 21, 2016 Report Posted November 21, 2016 In the Fire Dept we called those K12 saws. Real fun to tear a car apart with, but I can imagine one getting away from somebody. Watched a training video once where a guy had fallen into a very large above ground tank, like the 3 story high cylindrical ones. He had been painting the tank and somehow fell in the roof hatch. The fire dept shows up and instead of lowering somebody with SCBA gear on, as the tank had been used to store a volatile liquid, they decided to take their K12 and cut open the side of the tank. Well of course, it throws sparks as you cut through the steel. And boom, tank blew up, took out a bunch of guys. Those saws are nasty. Quote
gee-dub Posted November 21, 2016 Report Posted November 21, 2016 Very sad. A lesson in taking care in everything we do, The Stihl that C Shaffer showed is what I had pictured. Had a few folks injured with them running a low tooth count carbide blade to cut railroad ties as landscape items. An injury was generally related to removing the guard for "better access". Quote
MattSC Posted November 21, 2016 Report Posted November 21, 2016 I work in construction mostly grading and once a laborer (for another company ) was cutting RCP storm drain pipe with a saw like shaffer listed kicked back and indeed cut the guys throat. The EMTs said he missed cutting his jugglar by a few thousandths of an inch. The guy was ok after months of rehab. Also it should be noted the saw had the blade guard removed. Quote
bushwacked Posted November 26, 2016 Report Posted November 26, 2016 That's why you don't cut rough lumber with a chop saw...whoever asked a few days ago. How do you actually cut rough lumber before milling? Jigsaw? Quote
Eric. Posted November 26, 2016 Report Posted November 26, 2016 11 hours ago, bushwacked said: How do you actually cut rough lumber before milling? Jigsaw? Yep 2 Quote
gee-dub Posted November 26, 2016 Report Posted November 26, 2016 13 hours ago, bushwacked said: How do you actually cut rough lumber before milling? Jigsaw? 1 hour ago, Eric. said: Yep Me too. I switched to the jigsaw from the chop saw a decade ago. Has better dust collection and takes up sooo much less room. Bosch makes some wonderfully aggressive blades that will cut 8/4 like buttah. 2 Quote
bushwacked Posted November 26, 2016 Report Posted November 26, 2016 Me too. I switched to the jigsaw from the chop saw a decade ago. Has better dust collection and takes up sooo much less room. Bosch makes some wonderfully aggressive blades that will cut 8/4 like buttah. How do you like your Bosch? What blades do you use from them? Quote
..Kev Posted November 26, 2016 Author Report Posted November 26, 2016 21 hours ago, bushwacked said: How do you actually cut rough lumber before milling? Jigsaw? Yes.. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.