Recommended Posts

Posted

I started a commission this weekend for a media console. The client gave a rough sketch of what he wanted, so i revised it into two options. One with a simple beveled overhang, and one with a continuous-grain mitered "waterfall" case. He chose the simple overhang version which i think will go well with his existing decor.

 

993e90da17d28278bc47af5e98467451.jpg

I had planned (and bid) for surfaced 4/4 walnut for the entire case but the selection was crap, so i instead went home with a pile of 5/4. Some was surfaced, some rough so right out of the gate i increased my lumber cost and labor  . These nice wide 5/4 boards will make the top, bottom and drawer fronts, and ill go back next week to check the new shipment of 4/4 for the vertical partitions.

 

3fe53163c09347e0a72ed708d8b2ecf4.jpg

 

d091ea06fbfeecac49e01cbb3cf63878.jpg

I didnt want to thickness any more of this than i had to, so i did some pre-milling to reduce the stock a bit.

Found some decent grain matches and cut some rough lengths. Then roughly hand jointed the faces just enough for skip planing.

ed419f69e058df214493329ae1e04f29.jpg

Then i straightlined the real bad ones with the tracksaw before jointing the edges. I dont normally joint edges on rough boards but i wanted to be able to safely rip them down a bit before planing.

b2f6b55571ae69cff5a2bda65ec6eec4.jpg

7550843990698a8c5a66d70b5a7e064c.jpg

Sent from my SAMSUNG-SM-G890A using Tapatalk

Ready to go

c1e58301f103c9502f060e3f880cd339.jpg

Now for some planing...

1de95d67826c081da6a672fddab235bc.jpg

Recently emptied dust bag...

99450ab9521855038d7b90f7418ca05e.jpg

2 hours later...

e37c3bb16a6c89ed3b2db70fea54e611.jpg

All dressed up and ready for dominoes after planing and rejointing.

0c911e0db54f0e00ca0053ef94eef22f.jpg

Above you can see a small void i just couldnt cut out. It will be almost impossible to see, so i did a quick dutchman.

98e3c77018dd331e1818cd3c8c4b1eec.jpg

d83609b593891a4c0e87a22b1d13ce7d.jpg

14e3d5ca03f676f451ebab2ce856da26.jpg

Good enough, and i still have extra length so ill probably be able to cut it off, but i like to have options until the bitter end.

9fc50cfa30283e390da2316945aea5c3.jpg

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

  • Like 2
Posted
1 hour ago, wdwerker said:

did anyone else see huge blank spaces between the text and pictures ?

I am glad to hear this, now I can eliminate me as the problem.

Posted
10 minutes ago, C Shaffer said:

Hmm, not effectively for me. I will try a refresh. Looks like one post of two fixed. Thanks for fixing. 

Sorry, for some reason that one didn't change..  Should be fixed now

  • Like 1
Posted

Thanks guys. Sorry about the tapatalk nonsense. I always have to edit multiple times when doing these big write ups in tapatalk, and it seems each time i edit, it adds all these paragraph spacings.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

  • Like 1
Posted

Back at it! I got the rest of the lumber for the other vertical partitions and ply for the adjustable shelves. Same process as before. Break it down, grain match, mill, glue up.

a52e49eb34eca59333d25c86740132e1.jpg

fc4e7e1f4fbc851fa7ca3ccdf58ca608.jpg

f429dad9d9601d98100c5c73da38c03d.jpg

 

Also started breaking down the sheet goods, mainly to save shop space while i worked on the other parts.

d39b66bc1e4fbd49aaf9109dde4e1312.jpg

 

With the partitions dry and flat, and everything sanded to 100 i was ready to final size all the main case components.

99a8e7aa3f785940c62559100bdbe10c.jpg

24fae280b89b7e93da7d85f74055b4b5.jpg

 

Now for the joinery. Ive never done mid-field dominoes before so it took me some time to work up a good method. All the bays are the same size so i started with a shelf spacer and worked out from center.

22c280b4f1a761e6f05f9ca956cfa209.jpg

Layed out the mortise locations on a scrap wood "fence" that will give the bottom of the domino a registration.

50534128c3c154e1430255c18a207974.jpg

24cffece86d124ffd2f89a4091086ef4.jpg

4857a8428314489415ae3f404f90474a.jpg

Then cut some dominoes into the backside of that fence so i could plug it into each location and accurately set up the next row.

901422f6293331914ceaddc62da6dfcb.jpg

f569beb1551922ef0a7dba78fb1e794a.jpg

With all the mortises cut in the top panel, i transfered them to the bottom, checked everything for squarallel and started plunging. This went much faster as i didnt need to do all the spacing steps this time.

db56130adb73f68382861e42d03b7b35.jpg

Laying out the best orientation of the partitions and making dummy marks, ensuring i clamp them down the right way for mortising.

2e1909872c1d8badb189f6e8d9f3146c.jpg

Now to cut the mortises in the partitions. I used the same story stick to transfer the mortise locations. I had to make a center mark on the face of the domino to reference as im not using the fence for this. Everything is registering from the bottom of the tool so the fence is not an accurate way to align.

5b52043cda8271105d4731e07489756f.jpg

 

With that all done its time for the first dry case assembly. Its always rewarding when things go together with relative ease and line up as planned. Painstaking joinery layout is worth every second.

50d02bdf5112bef2cfd149c436c0b918.jpg

Dont mind the little gaps . The long panels are both slightly cupped after the bipolar weather patterns weve had here in california. But it will easily clamp out.

 

 

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.