Mike Vee Posted May 21, 2017 Author Report Posted May 21, 2017 well, this is what my garage looks like (and I still need to build my work bench. gonna use a blank solid core door and 4x4 legs) which is why space is such a premium for me Sent from my SM-G930F using Tapatalk Quote
Mike Vee Posted May 21, 2017 Author Report Posted May 21, 2017 Look at all that space. hahahah that center space is for the cars. I still need to cut those carpet down to create my own archery bale. my real space is the little nook in the back right is my real storage space hahahahaha Sent from my SM-G930F using Tapatalk Quote
Woodenskye Posted May 21, 2017 Report Posted May 21, 2017 That's about 2 my space as well, excluding my driveway. Mike, where are you located? I know a lot of members are willing to help out. 1 Quote
Mike Vee Posted May 22, 2017 Author Report Posted May 22, 2017 That's about 2 my space as well, excluding my driveway. Mike, where are you located? I know a lot of members are willing to help out. I'm in Monterey Park, CA. the Table Saw is technically my biggest purchase of all my tools. but I'm still a beginner and i don't know what I will do as I build stuff. they're mostly projects that pop up out of necessity. on my list right now, I have to build 1) built in bookshelf for my wife 2) vertical garden (27 feet wide divided into 2 parts and the box stacked in checkerbox style) 3) washer/dryer pedestal 4) custom work bench (with locking wheels) 5) a small drawer for the kitchen inside of a tall pull out drawer 6) 6 drawers for my bookshelf in the office Sent from my SM-G930F using Tapatalk Quote
Woodenskye Posted May 22, 2017 Report Posted May 22, 2017 Mike, unfortunately you are just a few thousand miles away. If you were closer, I would have let you borrow my rigid job site saw to see if it would suit your needs before you spent the money. i learned the hard way about rushing into a purchase and then upgrading when I discovered some of the limitations. 2 Quote
Alan G Posted May 22, 2017 Report Posted May 22, 2017 46 minutes ago, Mike Vee said: I'm in Monterey Park, CA. the Table Saw is technically my biggest purchase of all my tools. but I'm still a beginner and i don't know what I will do as I build stuff. they're mostly projects that pop up out of necessity. on my list right now, I have to build 1) built in bookshelf for my wife 2) vertical garden (27 feet wide divided into 2 parts and the box stacked in checkerbox style) 3) washer/dryer pedestal 4) custom work bench (with locking wheels) 5) a small drawer for the kitchen inside of a tall pull out drawer 6) 6 drawers for my bookshelf in the office Sent from my SM-G930F using Tapatalk Looking at your list I think you can accomplish 75% + of it with a circ saw and guide or track saw. Maybe the table saw is not such an immediate need. Save your money and get a table saw that better fits your needs once you know what those needs are. Right now it looks like it is a lot of ripping sheet goods which I feel is easier and safer to do with a track saw or circ saw and guide. Either one will tuck away neatly also. 2 Quote
Mike Vee Posted May 22, 2017 Author Report Posted May 22, 2017 gotcha. that means I'll have to buy a new circular saw. I'm extremely bitter that the skilsaw i got was crooked. I was hoping for a table saw because I realized that I will be cutting a lot of repetition cuts especially for the vertical garden since I'll probably be building 16 boxes I might have to buy another Bora extension track for my saw guide to do longer cuts, but I also bought the rip-cut saw guide as well so it should be ok for shorter width is there any recommendations to do a large amount of repetition cuts without a table saw Sent from my SM-G930F using Tapatalk Quote
knotscott Posted May 22, 2017 Report Posted May 22, 2017 3 hours ago, Mike Vee said: I think that's what's hurting me the most right now, the physical space constraints. I have to be able to put it away in a corner at the end of the day Sent from my SM-G930F using Tapatalk I would at least calculate out the difference in actual square footage consumed by each saw before ruling out a full size saw. My whole shop is squeezed into half of a two car garage. 2 Quote
wtnhighlander Posted May 22, 2017 Report Posted May 22, 2017 Mike, the DIY "track saw" is a great option for breaking down sheet goods. Roll the cars out, and lay a sheet of 2" foam insulation on the floor. Put ply/mdf on that, and saw away. As for the table saw, a 'contractor' style saw is a huge leap up from those little job-site saws, and can still be pretty compact. One or both side wings can be removed, leaving the 'cabinet' with about the same footprint as a benchtop saw. The fence rails will be the biggest problem, but even that is not insurmountable. Many of the newer saws have 2-piece rails, so they ship in a smaller box. Nothing says you have to use both pieces. Look at Steve Carmichael https://www.youtube.com/user/carmichaelworkshop And notice how the left wing of his saw is hinged to save space. I know the Rigid 4512 comes with a nice mobile base, so you can tuck it into a corner when not in use. I realize that saw, new, is above your target price range, but check Craigs List, seriously. The 4512 and its predecessors are pretty common. 2 Quote
Popular Post Andrew1 Posted May 22, 2017 Popular Post Report Posted May 22, 2017 http://m.homedepot.com/b/Tools-Power-Tools-Saws-Table-Saws/RIDGID/N-5yc1vZc29iZ18g compromise. It has a cast iron top and a mobile base. Is it as good as a cabinet saw, absolutely not bit it's not junk either. Cromona used it for a while. I have it I like it. Also my shop is in my basement and is the size of a one car garage with a lolly column in the middle. Where there is a will there's a way. Wait till fathers day I bet you or goes on sale and use raise.com for a percent off. 3 Quote
Mike Vee Posted May 22, 2017 Author Report Posted May 22, 2017 i just looked up some DIY track saw guides and found a really sweet looking one (that uses a dovetail track) (This one) but i think it seems like I really should wait for Father's Day and look for deals there. I feel like a compromise would be to get a table saw that is made with a cast iron frame. Home Depot's Memorial Day sale kinda sucks. no table saws or anything of interest for me so hopefully Father's day will be different. Lowe's Memorial day has some table saws but nothing really eye catching. saw some delta saws on craigslist but there are so many model numbers and stuff so I don't even dare look into those guys although I hear good things about them too. (saw a delta unisaw model 52-704 for $1k which looks like it's pretty well maintained but that's still waay out of my price range Quote
Andrew1 Posted May 22, 2017 Report Posted May 22, 2017 Home depot gave me an extra 10% off just for asking if they would match the harbor freight 20% coupon. I have heard many will fully honor it. Quote
Popular Post gee-dub Posted May 22, 2017 Popular Post Report Posted May 22, 2017 19 hours ago, Mike Vee said: easier with having my wife help pull the board along as it gets further out. 18 hours ago, Eric. said: Do NOT do this. Period. Agreed, e a roller stand, about $20 and way cheaper than the E.R. 18 hours ago, Mike Vee said: ohh no, not straight pull. from the side. always from the side. Seriously, please don't do this. 18 hours ago, Eric. said: One person per cut. Having a person 'help' you at the tablesaw is like two people trying to drive a motorcycle. No two people are this synchronized this side of Cirque du Soleil. You are getting some cautionary responses. These are not because we are full of ourselves and feel that only "the best" will do; please do not get that impression. These are well intended recommendations from folks that have gone down the wrong road and had less than stellar experiences. By offering up warnings about doing operations on a job site saw that one should not do, the intention is to advise, protect and hopefully save you some money. Nothing costs more than the wrong tool being re-sold and then spending on the right tool for the job. We all have differing situations as to space, budget, projects in mind and our approach to woodworking in general. I dance at weddings when the wife and I go but, this does not make me "a dancer". I do not need $200 dancing shoes (I apologize in advance if I don't realize that actual dancing shoes are much more, just trying to make a point). I do however need decent shoes that can handle what I am going to ask of them or I risk negative consequences. Saws of the scale you mention will have difficulty with larger stock. Consider what you actually need to do and try to get the best tool for that job. No table saw in the $300 range is going to be a versatile anchor-tool that will last you the rest of your life but, it may cut straight if setup carefully and not sorely used. 3 Quote
sjeff70 Posted May 22, 2017 Report Posted May 22, 2017 Both Home Depot and Lowes offer 10%, military discount. 1 Quote
Eric. Posted May 22, 2017 Report Posted May 22, 2017 24 minutes ago, gee-dub said: I dance at weddings when the wife and I go but, this does not make me "a dancer". I'm not sure what that makes you. I know what it makes me. LOL 2 Quote
Mike Vee Posted May 22, 2017 Author Report Posted May 22, 2017 Having a person 'help' you at the tablesaw is like two people trying to drive a motorcycle. No two people are this synchronized this side of Cirque du Soleil. You are getting some cautionary responses. These are not because we are full of ourselves and feel that only "the best" will do; please do not get that impression. These are well intended recommendations from folks that have gone down the wrong road and had less than stellar experiences. By offering up warnings about doing operations on a job site saw that one should not do, the intention is to advise, protect and hopefully save you some money. Nothing costs more than the wrong tool being re-sold and then spending on the right tool for the job. We all have differing situations as to space, budget, projects in mind and our approach to woodworking in general. I dance at weddings when the wife and I go but, this does not make me "a dancer". I do not need $200 dancing shoes (I apologize in advance if I don't realize that actual dancing shoes are much more, just trying to make a point). I do however need decent shoes that can handle what I am going to ask of them or I risk negative consequences. Saws of the scale you mention will have difficulty with larger stock. Consider what you actually need to do and try to get the best tool for that job. No table saw in the $300 range is going to be a versatile anchor-tool that will last you the rest of your life but, it may cut straight if setup carefully and not sorely used. don't worry, I have never thought of any of you guys as full of yourselves. I'm very grateful to have really sound advice and patience with my questions as well as warnings about such things.. i forgot there's such a thing as a roller stand so that's why I thought to tag my wife in to help with the sheet. I was looking more at the 500-600 range because the 300 range all are reviewed as unreliable for long term work. I feel that now I want to see if I can somehow find a hybrid table saw or a cast iron table saw and I can get a mobile base for it. as I said, I can't really have a cabinet saw due to space constraints, so I need to strike a compromise somewhere. it seems like this has turned from a bosch vs ridgid to a what space saving table saw can I get for 500-600 bucks that will last me a long time and cut safely haha (which is also an even better direction) Sent from my SM-G930F using Tapatalk Quote
SawDustB Posted May 22, 2017 Report Posted May 22, 2017 I went through this same dilemma a couple of years ago. I looked at the space required by the job site saw, even folded up, and it wasn't much less than the footprint of the ridgid cast iron saw. I ended up buying the r4512, and you can find it within your budget during the home Depot tool sale. The other advantage is that you can easily or a router table in the wing of the saw, so for me that took up less space since I could get rid of my router table top I'd set up on sawhorses. It is incredibly easy to move around, so mine goes into the middle to use it, then immediately goes against the wall again. It's way more convenient than setting up the job site saw every time. Listen to the guys. They talked me out of the job site saw too, and I'm so happy they did. There are other brands and saws that will work too, but the ridgid is the entry point to something worth using. 1 Quote
wtnhighlander Posted May 22, 2017 Report Posted May 22, 2017 Like SawDustB said, Rigid's mobile base is one of their best features. Mine is a much older 24241, but even it includes their "Herculift" system. One press of a pedal, and my saw rolls freely about the garage, or sits firmly on all 4 feet while in use. 1 Quote
Mike Vee Posted May 23, 2017 Author Report Posted May 23, 2017 Thank you guys! so I guess the ridgid r4512 is the one to go for then? is it possible to extend the rip width with other products or self built extensions? Sent from my SM-G930F using Tapatalk Quote
Andrew1 Posted May 23, 2017 Report Posted May 23, 2017 I would imagine you could for the right price in after market products. My 2 cents though is that anything extended probably would not be very safe. Better to use a circle saw and straight edge. If you so go with the Ridgid just be aware the stock blade is utter crap. I would call it a paperweight but that's insulting to a good paperweight as it's to big and has edges that are less than sharp. I put it on to try and it had trouble cutting 3 quarter oak bogging the thing down. Threw on a cheapo craftsman I had( made by fued so I imagine same as diablo) and it cuts great. 1 Quote
wtnhighlander Posted May 23, 2017 Report Posted May 23, 2017 Thank you guys! so I guess the ridgid r4512 is the one to go for then? is it possible to extend the rip width with other products or self built extensions? Sent from my SM-G930F using Tapatalk If you actually NEED more than 30" of rip capacity, it is possible, I'm sure. The fence rails on my 24241 attach to the cast iron top with evenly-spaced bolts. When you are assembling the rails, shift them to the right by one bolt hole, to gain 7 or 8 more inches. You can probably go 2 holes, but that leaves the left wing supported only by the bolts between it and the main table. Beware that shifting the rail throws the attached scale off. You can replace it, or just ignore it like I do. One more thing to consider is balance. I shifted my rails, and added a shop-built router table between them, outside of the right wing. The saw is still fine on its feet, but a little tippy on the wheels. Just have to be more careful when rolling it. 1 Quote
Eric. Posted May 23, 2017 Report Posted May 23, 2017 I only have 32" rip capacity. If there's ever a need to make a rip wider than that, there's probably a better way to do it than the table saw. The ONLY time I've wished I had more rails is when I'm crosscutting something long on the sled and I want to use the fence as a stop...but I don't have the distance. But that is so rare. 1 Quote
Mike Vee Posted May 23, 2017 Author Report Posted May 23, 2017 gotcha. I'm planning on ripping the board tommorrow. I took your advice and purchased a 2" extruded. polystyrene foam and a 1/2" CDX grade plyboard. chopped both in half and I'm taping it up so I can fold it away Sent from my SM-G930F using Tapatalk Quote
Mike Vee Posted May 23, 2017 Author Report Posted May 23, 2017 2 hours ago, Eric. said: I only have 32" rip capacity. If there's ever a need to make a rip wider than that, there's probably a better way to do it than the table saw. The ONLY time I've wished I had more rails is when I'm crosscutting something long on the sled and I want to use the fence as a stop...but I don't have the distance. But that is so rare. haha funny enough that's the exact rip width I needed (my wife's bookcase is 30" wide + 1" on each side of the bookcase) But oh well. I do know that based on the beadboard I have 8'x4', i would need to rip 16" on one side, so it's probably easier to rip 16" off the side than it is to rip 32" haha I have sooo many plans to do stuff and it's going to help later Quote
SawDustB Posted May 23, 2017 Report Posted May 23, 2017 I just went out and looked at the saw. If you wanted 32" of rip capacity, that would be extremely easy to do. The rails have a t slot machined in the back to hold them on, so it wouldn't be a problem to move them over. As the other guys have said, it would just mean the measuring tape on the saw wouldn't be right, but stick on replacements for that are cheap. At 32", you'd still be able to use all the bolt holes and you might not even need to shift the back rail at all. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.