Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

BC HiVise

Featured Replies

  • Popular Post

Got to make a quick trip home for a visit and found a little shop time.  

 

I haven't seen that kind of vise before.   Nice to see someone else using a small herd of squares for layout work !

I will set a square for almost every dimension and leave it till the projects done. If they are close in length I label them w some masking tape to avoid mistakes. 

  • Author
2 minutes ago, wdwerker said:

I haven't seen that kind of vise before.   Nice to see someone else using a small herd of squares for layout work !

I will set a square for almost every dimension and leave it till the projects done. If they are close in length I label them w some masking tape to avoid mistakes. 

Yea, I have quite a few and tend to leave them set for the duration of a project as well.

Here's a link to the HiVise..  https://benchcrafted.com/hivise.htm

 

Very interesting!  I just read the instructions and will probably order one. Might as well watch your build first to see if I want the mounting screw or if clamps are sufficient.

  • Author
9 minutes ago, wdwerker said:

Very interesting!  I just read the instructions and will probably order one. Might as well watch your build first to see if I want the mounting screw or if clamps are sufficient.

I did make some changes to the plan.  

Kev, what was the thought process of going with the HiVise versus a moxon vise?  It seems the moxon may be more versatile, but I could be wrong.  I will be following along like usual.

  • Author
6 minutes ago, Woodenskye said:

Kev, what was the thought process of going with the HiVise versus a moxon vise?  It seems the moxon may be more versatile, but I could be wrong.  I will be following along like usual.

Couple things..  For starters, it's just not something that I'm going to use all that often.  And, it's much smaller to store when not in use.

I was actually considering doing a bench to go on the bench with a moxon and a quick release.  When I saw this option I figured it would be easy to test drive it for a while and not be killed financially if I didn't like it.

Awesome. This will be another fun one to watch!!

 

What squares do you use?

 

 

 

 

Sent from my iPhone using Tapatalk

I have a bunch of squares from PEC (Products Engineering Co. ) All are cosmetic blemish seconds from Harry Epstein. Usually just small areas of the engraved measurement lines are incompletely filled with black enamel. No accuracy problems whatsoever. A 24" combination square can come in real handy, so I have 3 . One is a Starrett and cost $100 for the blade years ago. The 24" PEC blades were $15 when available ( none in stock now)

44 minutes ago, wdwerker said:

I have a bunch of squares from PEC (Products Engineering Co. ) All are cosmetic blemish seconds from Harry Epstein.

Yea, these are the ones  I've been getting too.  Just added a couple more.

4 hours ago, TIODS said:

Couple things..  For starters, it's just not something that I'm going to use all that often.  And, it's much smaller to store when not in use.

I was actually considering doing a bench to go on the bench with a moxon and a quick release.  When I saw this option I figured it would be easy to test drive it for a while and not be killed financially if I didn't like it.

Thanks, I look forward to the rest of the build and how you like once you have put it through its paces.

Everytime you do stuff like this it costs me money.  Stop it!:D  it looks really cool.  

This is really cool, Kev. I haven't seen this vice before so i look forward to seeing it take shape. Great first video !

 

Sent from my SM-N910W8 using Tapatalk

 

 

  • Author
1 hour ago, Just Bob said:

Everytime you do stuff like this it costs me money.  Stop it!:D  it looks really cool.  

Sorry Bob..  C'mon up and test drive it..

  • Author
  • Popular Post

This is where I strayed from the plans.

 

On 6/11/2017 at 0:32 PM, TIODS said:

For starters, it's just not something that I'm going to use all that often.  And, it's much smaller to store when not in use.

A man after my own heart.  I want something that does what I am after.  That may be one thing, it may be half a dozen things but, I don't need to pay for or store all the stuff that allows me to do another ten things that I will never do.  Appreciate the videos.  I always seem to pick something up and enjoy the presentation.  Thanks.

I like you seating the clamp block in a dado to stiffen the connection. I was thinking a longer 3" square one would allow more screws and clamps to the bench. It's great to see someone else's choices before I pull the trigger on one.

 

Vids are getting better and better, Kev. We want more ! Quit that silly job of yours and go fulltime youtube please. Thanks

 

 

Sent from my SM-N910W8 using Tapatalk

 

 

 

 

  • Author
5 hours ago, shaneymack said:

 

 

Vids are getting better and better, Kev. We want more ! Quit that silly job of yours and go fulltime youtube please. Thanks

 

 

You sound very much like my wife!  6 more years!

  • Author
6 hours ago, wdwerker said:

I like you seating the clamp block in a dado to stiffen the connection. I was thinking a longer 3" square one would allow more screws and clamps to the bench. It's great to see someone else's choices before I pull the trigger on one.

Because it goes together dry, if this length doesn't work out, I can always make a longer one.

  • Author
4 hours ago, Chet K said:

Great video, Kev.  I know this was filmed awhile back, but it is weird, Its 104 here today and watching the video, you have the pellet stove going.

Yea, this was shot when I got that week off to go home..

On 6/18/2017 at 8:32 AM, wtnhighlander said:

Plans, shmans! Sometimes you just have to make it work for you!

Exactly!!! Get in there and make something!!! :) 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.