Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Router Table and Cabinet

Featured Replies

  • Popular Post

Since the photobucket crisis I've been migrating some old pics over to imgur so all of my project threads here don't have broken images.

I'm asked fairly often about my router table, and I can't seem to find the original thread those pics were posted in, so I'm re-posting them here for future reference.  This will be old news to some of you but others might find it helpful.

 

1tMkH6v.jpg

 

HJ2FCaE.jpg

 

ukRUZYn.jpg

 

1sEO2TG.jpg

 

yv4ecNf.jpg

 

 

  • Author
11 minutes ago, wtnhighlander said:

having the extrusion sticking out the back seems so bulky and awkward.

How so?

I do like it and it is super precise, but if I had it to do over again I'm not sure if I would buy it a second time.  I thought I would do a lot more with the features it offers like all the wacky dovetails and what-not...but I don't.  I either cut them by hand or use the Leigh.  So most of the versatility is wasted on me.  But that micro-adjust...man I love it.  Thousandths of an inch...click, click, click.  That's the one part I wouldn't want to give up.

The one complaint I have is I wish it had a wider table.  It's fine, but bigger would be better.

I don't (yet) have a router; hence a couple of uninformed questions (i.e. don't try to read anything clever into the questions!)

- what provision do you make for dust/chip collection?

- I've read in another thread about the potential damage to reliability of housing the router in a closed area without ventilation.  Does this situation apply to your table?

How so?

I do like it and it is super precise, but if I had it to do over again I'm not sure if I would buy it a second time.  I thought I would do a lot more with the features it offers like all the wacky dovetails and what-not...but I don't.  I either cut them by hand or use the Leigh.  So most of the versatility is wasted on me.  But that micro-adjust...man I love it.  Thousandths of an inch...click, click, click.  That's the one part I wouldn't want to give up.

The one complaint I have is I wish it had a wider table.  It's fine, but bigger would be better.

I just meant that it appears to require twice the table space, or would have a 'tail' sticking out beyond the table.

  • Author
9 hours ago, Pondhockey said:

- what provision do you make for dust/chip collection?

- I've read in another thread about the potential damage to reliability of housing the router in a closed area without ventilation.  Does this situation apply to your table?

It has a 4" port on the back (seen in the last two pics), and I have a Rockler Dust Right adapter on a flex hose hooked to a blast gate that I use to connect it.  It provides more than enough airflow to keep the motor cool.  I would not want to run the motor without the DC on or the doors open, so you're correct in thinking it would overheat.  But the DC solves it effectively.

 

3 hours ago, wtnhighlander said:

I just meant that it appears to require twice the table space, or would have a 'tail' sticking out beyond the table.

No doubt it's a big table.  I store it under my miter station so it stays out of my way, but if you have a small shop it could be a negative.  Although it's not THAT much bigger than a standard router table footprint.  Maybe 25% or so bigger.

The "tail" only sticks out when you're using it.  For storage it's all contained within the perimeter of the table.

The only real drawback to the entire setup is the cost.  Between the table, fence, lift, motor, and cabinet...I'm sure I have close to 2k in it.  I've had it a long time now so I don't remember the exact numbers, but it's definitely north of $1500.

17 minutes ago, Eric. said:

but it's definitely north of $1500.

I have the same setup and everything from Incra minus the cabinet was $1500 and then what it cost to build your table or cabinet.

I only got the full 25 inch super system from Incra, I paid $420 for that alone. I wouldn't buy again because honestly I never use it to cut joinery with the templates so it's an overkill for me.

  • Author

If there was a way for them to incorporate the micro-adjust into a simpler fence without all the dovetail nonsense, that would be the one I'd buy.  Unfortunately I don't believe it exists.

8 hours ago, Eric. said:

It has a 4" port on the back (seen in the last two pics), and I have a Rockler Dust Right adapter on a flex hose hooked to a blast gate that I use to connect it.  It provides more than enough airflow to keep the motor cool.  I would not want to run the motor without the DC on or the doors open, so you're correct in thinking it would overheat.  But the DC solves it effectively.

 

Ah yes, I see it now (I was viewing some strange optical illusion - brain blip.)

I love this router table. It's been on my list for a while to steal the design. At least take inspiration from it. You didn't happen to sketchuperize it did you?

  • Author
17 minutes ago, Cliff said:

I love this router table. It's been on my list for a while to steal the design. At least take inspiration from it. You didn't happen to sketchuperize it did you?

Nope, sorry, I still don't sketchuperize.  I just wingiterize.

On 7/6/2017 at 8:02 PM, Eric. said:

Nope, sorry, I still don't sketchuperize.  I just wingiterize.

 

Me wingiterizing:

Simpsons_13_17_P4.thumb.jpg.6676a67ac68fbd6cc451b4ed9b1992cd.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.