Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help! Use wrong cleaner on my white IKEA table!

Featured Replies

Hello guys, recently i bought a IKEA meltorp white table, and here is the link in case u are wondering : http://m.ikea.com/us/en/catalog/products/spr/39011781/

When I'm doing school projects on it, I accidentally stained my permanent marker inks on it then I clean it with a multipurpose cream cleanser. Stupid enough, then I got myself trouble.

There are now a kind of glossy and shiny grease on it, I try wiping it away lots of time but it has not gone yet. I'm pretty sure it is absolutely not any oily grease on it, and I think it is the cream cleanser that corrode it.

It now still appears to be white but I guess the first layer of the table is corroded and any ways I can recover it? 
 

I would prefer home remedies like using vinegar, toothpaste or household ingredients to solve it but if you have any other suggestions feel free to let me know. Any answers will highly appreciated,  thank you! And I will keep your guys updated about how the table been -

*There r pictures of the table and the glossy stain, cream cleanser that I used below.

 

IMG_20170922_140945.jpg

IMG_20170922_140844.jpg

IMG_20170922_140904.jpg

15060612114541577539377.jpg

IMG_20170922_140820.jpg

I would try a solvent like acetone on an inconspicuous area. Nail polish remover contains acetone but it has oily ingredients too. A paint store or home center should have pure acetone. I'm not familiar with that specific table so there is a chance that it's painted instead of laminated. Acetone could completely de-gloss a painted surface or worse remove the paint. 

  • Author

I think it is painted?  Do u know how to identify wether it is painted or laminated?  

Laminations are usually visible at the corners where two edges meet. I don't see them in the photos, but the resolution may not provide enough detail. I'm leaning toward painted, though. 

I would play it safe, and try cleaning with water and mild detergent, like dishwashing soap. Just dampen a rag and scrub.

  • Author

Thanks for the answer! I pretty sure it isn't lamination as u said, is it that if is paint I'm not safe to use ace stone?

And yeah, I do try using dishwashing liquid will a little afraid that i will scrub too hard and worsen it. I rub it gently, wipe it of with a wet cloth and dry it with paper tower. The glossy stain still remains there unchanged.
 

So as I mention I used a kind of cleanser (maybe too acidic) that's why it is corroded. Does it possible that the stain form on it instead of  corroded and losing a surface?

It sounds as if the cleanser has caused some damage to the surface of the paint or perhaps a clear coating over the paint. I have no suggestions, short of refinishing. 

There are some products designed to 'repair' clear wood finishes, but I have no idea how they might work over paint. Might not be available in your area, anyway.

Yeah, the mild abrasives in the cleaner have polished the surface. So your options are to repaint, or buff out the entire surface to match. The easiest way to do that might be to use a random orbit sander and fine 3M pads to get the degree of sheen you want.

  • Author
On 23/09/2017 at 4:48 AM, wdwerker said:

You might try buffing with a gray or white Scotch-Brite pad. They sell them in the paint department. 

Thanks For the answer! i am worry that buffing will let the whole surface look worse- does Scotch-Brite pad scratch the table? 

  • Author
On 22/09/2017 at 11:23 PM, drzaius said:

Yeah, the mild abrasives in the cleaner have polished the surface. So your options are to repaint, or buff out the entire surface to match. The easiest way to do that might be to use a random orbit sander and fine 3M pads to get the degree of sheen you want.

I see ! Thank you so much !!! I think I'll probably go for buffing, do you think it will looks good for the whole surface?

Because it seems like the corroded part is a lot more dimmer 

You can choose how shiny you want it. Start with a grey pad, which would be less shiny than white.

  • Popular Post

If the white pad doesn't make it shiny enough try buffing with a piece of brown paper bag. Avoid seams, creases , printing etc. it's surprising the results you get.

  • 2 weeks later...
On Sunday, September 24, 2017 at 8:08 AM, wdwerker said:

If the white pad doesn't make it shiny enough try buffing with a piece of brown paper bag. Avoid seams, creases , printing etc. it's surprising the results you get.

I use brown paper buffing on all my finishes now. Takes a bit of time but it looks awesome and it's nice and silky feeling after.

Well Ikea sells disposable furniture. It's meant to be damaged somehow. I don't know if the table worth the fixing time.

Anyways, I would do a very light wetsanding with a P4000 Abralon pad. Then you can polish the surface to get the required shine.

Try Mr. Clean magic eraser.  They are amzing, but test it first.

Mr. Clean Magic eraser’s are made of melamine and are abrasive. Test on the spot that is out of sight before proceeding. They will leave a scratch pattern on highly polished services and even some glass compounds. Do not use them to clean your laptop screen :-) They work wonderfully on a slew of stuff. Just think of them as a microabrasive film.

To the future for magic marker/sharpie pens, they can be cleaned easily with hand sanitizer. The alcohol breaks it down and comes up easily.

According to the product description it's a melamine surface.

More from the site:

Product description

 

  • Table top:
  • Particleboard, Melamine foil, ABS plastic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.