Popular Post ..Kev Posted October 21, 2017 Popular Post Report Posted October 21, 2017 As most of you know, we recently made a move. Obviously, the new house needs lots of things and the wife is pretty particular about what she wants. I had to take a little time out from the stuff in this shop to build a picture frame that she wanted. She spotted the frame she wanted in the Guild free tier stuff and wanted this frame for a painting of her grandparents farm in Georgia. Curly maple and walnut with ARS finish.. I'll try to remember to come back and update this when we get the painting in it and get it hung. Because I have to take off for a few days (work) tomorrow, I didn't even bother to video this one. Marc and Matt covered it pretty well. On that note, if you're cutting coves on the TS, if you flip the piece end for end and run each cut a second time, they will come out perfectly centered. 9 Quote
Chet Posted October 21, 2017 Report Posted October 21, 2017 21 minutes ago, TIODS said: On that note, if you're cutting coves on the TS, if you flip the piece end for end and run each cut a second time, they will come out perfectly centered. I have gotten to where this is one of my go to techniques on a lot of parts during projects, it cuts way down on the head scratching. The frame cam out nice Kev. 1 Quote
Popular Post Cheeset202 Posted October 22, 2017 Popular Post Report Posted October 22, 2017 Nice job Kev, you just whip this up in your spare time! Let's recap the past few weeks, move from WA to MT, set up the house, set up your shop, build a coffee table stand and now a picture frame. Probably missing several other details. Damn it took me 2 months just to get my shop going! 3 Quote
..Kev Posted October 22, 2017 Author Report Posted October 22, 2017 Yea, lots of details in there and a lot of long hours but, I'm on the down hill slide now and ready to build some furniture! I have one more "shop move" video that I'll drop next week and then we'll get into those tables! 1 Quote
wtnhighlander Posted October 23, 2017 Report Posted October 23, 2017 What blade do you prefer for making coves? My ATB general purpose blade leaves ridges, no matter how slowly I feed. Quote
..Kev Posted October 23, 2017 Author Report Posted October 23, 2017 6 hours ago, wtnhighlander said: What blade do you prefer for making coves? My ATB general purpose blade leaves ridges, no matter how slowly I feed. I used my normal 40t ATB and had similar ridges. I wrapped some 80 grit around a piece of 4" PVC pipe and sanded before I cut the miters. It worked great and was quick to sand out the ridges. 1 Quote
Popular Post ..Kev Posted November 5, 2017 Author Popular Post Report Posted November 5, 2017 The wife finished getting the matting and stuff done.. Just thought I'd drop an update.. That's her grandparents farm not too far from Steve. 10 Quote
Chet Posted November 5, 2017 Report Posted November 5, 2017 The picture looks good in that frame, like they were meant for each other. Quote
JosephThomas Posted November 5, 2017 Report Posted November 5, 2017 @TIODS Good stuff, the dimensions of the frame and the matting came out great. Who painted the painting? Quote
..Kev Posted November 5, 2017 Author Report Posted November 5, 2017 12 hours ago, JosephThomas said: @TIODS Good stuff, the dimensions of the frame and the matting came out great. Who painted the painting? I don’t recall JT but I’ll get the story from my wife Quote
Cheeset202 Posted November 6, 2017 Report Posted November 6, 2017 Beautiful frame, great picture, perfect match! Quote
wdwerker Posted November 6, 2017 Report Posted November 6, 2017 Frame , painting and farmhouse all look great ! Is the house still standing , or has it been replaced with a neighborhood of McMansions ? That’s a common and unfortunate thing around here these days . Quote
rarefish383 Posted November 6, 2017 Report Posted November 6, 2017 Beautiful frame and farm. As wdwerker said, the old farms and barns are vanishing around here too. My wife had a friend that had made a bit of a name for himself as an artist, in Ohio. He had an uncle that chewed tobacco that was some sort of legislator. He got a bill passed that made the old Tobacco Advertisements on barns historic land marks. Jim made his name for landscapes, farms and barns, Joe. 1 Quote
..Kev Posted November 6, 2017 Author Report Posted November 6, 2017 9 hours ago, wdwerker said: Frame , painting and farmhouse all look great ! Is the house still standing , or has it been replaced with a neighborhood of McMansions ? That’s a common and unfortunate thing around here these days . The house is still standing and the land is still intact but, I’m pretty sure it’s being eyed for development Quote
bushwacked Posted November 6, 2017 Report Posted November 6, 2017 that came out looking great finished!! How many more frames are being requested for the house? Quote
..Kev Posted November 6, 2017 Author Report Posted November 6, 2017 2 hours ago, bushwacked said: that came out looking great finished!! How many more frames are being requested for the house? A bunch Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.