Recommended Posts

Posted
On 10/26/2017 at 6:30 PM, K Cooper said:

Didn’t know you guys had pecan in Cal.? My third favorite after mesquite and walnut. Mum’s the word about the glue up;)

Oh, and go Astro’s 

Happened by my preferred yard yesterday (the small annex of a larger yard) so I thought I would drop this in.  I don't know what the random strip of molding and the stick of straight-grained fir were doing there.  I asked around and then put them where they belonged . . . yeah, I'm one of those guys.

 

Soroyan (1).jpeg

Posted
7 hours ago, JosephThomas said:

Very nice.  I forgot about the color matching til now. Did you do anything particular to achieve it, or just careful stock selection?

The hutch was done in 2013 with an oil/varnish blend and has warmed nicely.  I added a bit of amber Transtint to clear dewaxed shellac until I got the color match on the new material.  Top coated with some rattle can lacquer for the base, several coats of poly for the top. 

  • Thanks 1
Posted

Pecan such a nice wood.I really like the outcome. The details are nice and simple but add good depth.

I am curious why you did the thick veneer. I know why it's thick but why veneer in the first place?

Posted
9 minutes ago, Chestnut said:

Pecan such a nice wood.I really like the outcome. The details are nice and simple but add good depth.

I am curious why you did the thick veneer. I know why it's thick but why veneer in the first place?

The legs are a build up.  The veneer hides the edge grain of the laminated blank.  My usual veneer thickness for this method is 1/8" so that an 1/8" round over or chamfer hides the seam.  

NS-Leg-Example-2d.thumb.jpg.a8cfae58e39f634c8c6594d2b4f9e8d4.jpg

 

These legs have the Blacker House detail which cuts into the face a fat 1/8" so I needed more meat to support that detail. 

  • Like 1
Posted
23 minutes ago, gee-dub said:

The legs are a build up.  The veneer hides the edge grain of the laminated blank.  My usual veneer thickness for this method is 1/8" so that an 1/8" round over or chamfer hides the seam. 

These legs have the Blacker House detail which cuts into the face a fat 1/8" so I needed more meat to support that detail. 

So would you do the veneer if you were working with a thicker material that you could do 1 piece legs?

Posted
5 hours ago, Chestnut said:

So would you do the veneer if you were working with a thicker material that you could do 1 piece legs?

No.  I was just too stingy to use my 8/4 pecan on the dog . . . . Please don't tell her.

  • Haha 2
Posted
16 minutes ago, gee-dub said:

Please don't tell her.

If her hearing is like my two, its to late. :D

Gee, thats nice work on something that is normally a simple project.

Posted
7 hours ago, gee-dub said:

The legs are a build up.  The veneer hides the edge grain of the laminated blank.  My usual veneer thickness for this method is 1/8" so that an 1/8" round over or chamfer hides the seam.  

NS-Leg-Example-2d.thumb.jpg.a8cfae58e39f634c8c6594d2b4f9e8d4.jpg

 

These legs have the Blacker House detail which cuts into the face a fat 1/8" so I needed more meat to support that detail. 

Interesting, I would have thought there'd be movement problems with this. Pardon the questions below as I dig for details to see if I can replicate this process..

Is it normal PVA glue?

Do you take the time to line up the grain between the veneers and the blank? (i.e. if the blanks are flatsawn, do you use quartersawn stuff for the veneers)

Would you still feel good about this process for an outdoor piece?

Could you do this with 2 different species,  a cheaper material like poplar for the core and something else for the veneers, or would that introduce more potential movement issues?

Posted

I would be interested in the too.  I know Marc had an example like this with QSWO and he was using the veneer to get the Quarter Sawn look in all four sides although he was starting with square stock not glued up.

Posted

Thanks. By appropriate outdoor glue, does that mean titebond 3 would qualify? I guess I'm wondering if I should use epoxy or event a veneering glue so that it has more "flex" so it doesn't cause cracking if the wood moves a lot.  Or am I overthinking it, for something as small as a leg? If it helps, I"m mostly talking stuff 2.5" square or smaller.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 74 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined