curlyoak Posted March 11, 2018 Report Posted March 11, 2018 This issue 40 years old and still works. Today there are better performing sabre saws, but will they last? This will cut 2" oak... Quote
Tpt life Posted March 12, 2018 Report Posted March 12, 2018 This is not the answer you were looking for but...any saw I ever used would cut 2” oak with the right blade. Blade geometry development has led to huge improvements to usefulness of these tools. Some cheap ones will run forever. Orbital action is nice for rough work. 1 Quote
Tom King Posted March 12, 2018 Report Posted March 12, 2018 I have a number of Rockwell tools that I bought new when that one was available for sale. I believe they are all still working. I don't have that jigsaw only because I found an older version of that one still on the shelf in a hardware store about the same time that I bought all the other Rockwell tools. Mine doesn't have the plastic handle because it was made before they started double insulating power tools. Mine still runs, but I lost the clamp that holds the blades in place, and about that time, Bosch came out with one that uses a different shaped blade at the top, and Bosch blades put those old Porter Cable blades to shame. I expect tools made then will still be going long after most newer made ones have given up. Quote
Andrew1 Posted March 17, 2018 Report Posted March 17, 2018 I have an old still with a similar metal casing. No clue who made it or how old, but I know it was my grandfather's so probably at least 50 years old. Still works, nothing can big it down. I don't use it much because the weight and single speed. Used it not long ago to clean up rust and runs like new. I wouldn't sell it ever. Family tool for life and when i was little it was my first power tool my dad let me use and play with. I was drilling holes at like 4 with it. Quote
Popular Post wdwerker Posted March 17, 2018 Popular Post Report Posted March 17, 2018 " an old still " ???? I was sure you were going in a different direction...... 1 2 Quote
Dennis O'Shea Posted March 17, 2018 Report Posted March 17, 2018 The stories that saw could tell very nice Quote
Popular Post collinb Posted March 17, 2018 Popular Post Report Posted March 17, 2018 1 hour ago, Dennis O'Shea said: The stories that saw could tell very nice cut, cut, cut, cut, cut, break blade, new blade, cut, cut, cut, cut 3 Quote
Andrew1 Posted March 18, 2018 Report Posted March 18, 2018 On 3/16/2018 at 9:09 PM, wdwerker said: " an old still " ???? I was sure you were going in a different direction...... By still my phone ment to say drill lol Quote
wdwerker Posted March 18, 2018 Report Posted March 18, 2018 Oh I knew that ! Just couldn't resist giving you a poke because of it < grin> Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.