Recommended Posts

Posted

How large were the tile and what were the issues? Excessive lippage? Were they some of the long slender plank ones, or the real beast squares? I've generally only seen the big square ones in commercial spaces over concrete slabs or occasionally in residential basements. 

Posted

These were just 12 x 24.  The problem was lippage, in a room that will be occupied by people of all ages, barefoot out of the lake many times.   On concrete, in a daylight basement room, but really badly out of level.

  • Like 1
Posted

12 x 24 is already pretty darn big! They probably weigh 10 lbs a piece, right? Glad you were able to straighten it out for them. I am curious to hear what you were learned, but don't want you going too much trouble just for me. 

Posted

I have a bit of a tile fetish & love doing it. I've done 1 kitchen with a less than level subfloor in 12 x 24 & it certainly had its challenges. Please do share any tricks, tips or pitfalls that you encounter. 

Years ago I got a Dewalt D24000 tile saw, & for light use, it is very good. It won't match the brute force of the big commercial saws, but it's so much nicer to move, store, and use than those guys. It really is a sweet tool & I highly recommend it.

Posted

Boy, I wish I'd have known about the levelling systems when I did an 18" x 18" tile job. Would have made the job so much easier. @Tom King, do those 12 x 24 tiles have a curvature to them? The ones I used in that kitchen had the middle bowed up about 1/16" higher than the ends. That made it much easier to get things more acceptably flat on the uneven floor cause it kept the corners from sticking up proud.

Posted

There is no consistency in the curvature.  They mostly have a curvature down in the middle.  Coming right out of a box, on the pallet stack, they are pretty flat.  Left overnight, like we do with wood for it to acclimate, the curvature shows up the next day.  Fortunately, it's nothing like as much as 1/16", but what makes it worse is they have pretty pointed corners on the edges, with no taper at all.  Poorly designed overall, but the owners didn't want to change tiles now.  Some better shopping for tile would have made it so much easier to do a good job.

I expect the weight in the cube on the pallet flattens them out, but they must have some stress in them.  Laid normally, on a thin bed of thinset, it probably wouldn't matter as much, but when laid on a thick bed, the stress has time to come out before the mortar can set hard enough to hold them.  

Posted

The curvature on the tiles was actually a good thing. We set them in a running bond, so the corners of the tile were always just a little lower than the edge of the next tile. That was especially helpful where there was hump (one joist was high) that ran across the width of the room. It may not have been as much as 1/16", but it was enough to help keep those corners from being proud, while not being obviously curved. It was pretty consistent from tile to tile.

It was for my daughter's kitchen & I'm just glad they didn't want 12 x 48 tiles. I think I'd have declined.

Posted
47 minutes ago, drzaius said:

The curvature on the tiles was actually a good thing. We set them in a running bond, so the corners of the tile were always just a little lower than the edge of the next tile. That was especially helpful where there was hump (one joist was high) that ran across the width of the room. It may not have been as much as 1/16", but it was enough to help keep those corners from being proud, while not being obviously curved. It was pretty consistent from tile to tile.

It was for my daughter's kitchen & I'm just glad they didn't want 12 x 48 tiles. I think I'd have declined.

Did you have to back butter the tiles then? I'd be concerned about not getting enough thin set in the middle.

Posted
On 1/22/2019 at 11:31 AM, Chestnut said:

I'm curious but i'm not sure i want Tom to show me all the stuff i did wrong on the large format tile job i did. Then again i sold that house....

Same..

12x24s in the bathroom and shower

Posted

At first go i thought you got a call back on your own job. I was about to say something to the effect of that home owner must have been really really picky. I think you solution to build up in the low areas rather than try and fill with thin set was the right way to go about it. It does make me wonder if there is an "approved" way of doing that. I leveled the sub floor in my old house using shingles and multiple thicknesses of  plywood. it worked great but it'd have never held up under tile. I think from the high point in that room to the low point it was off by over an inch. for a 12 x 14 room it seemed like a lot but the house was 95 years old.

The large format tile work i did was the walls in a bathroom and shower. I defiantly did have some awful lippage there but it wasn't the floor. I did do the floor with 12" natural slate tile. I also got some lipage there but it was mostly because the tiles were cheap and varied in thickness. I really liked the look of it but it had it's down falls. I just chalked it up to being a natural product and didn't think much of it. Doing walls with 12 x 24 tiles was nerve racking. I was worried they were going to fall off the wall constantly.

Posted

On a flat surface, it wouldn't be so bad.   Thinset, if not mixed too thin, is really sticky.  My first try at leveling was with a stepped screed to ride on the previous, and set up row of tile.  That didn't work because of the stickiness of the thinset.  You could probably put 12x24's on a ceiling.

The way we're doing it, the notched trowel still can't be bottomed out, so it's a bit more of a balancing, guessing act, and the thinset has to be mixed thick enough that it's hard to squeeze down if you put too much under it.  I've even had to stand on some tiles to get them down close enough for the levelers to take over.

I'll find a video of floor leveling.   There are special products for that purpose, but this house had a mold problem, and the owners didn't want all the extra moisture put in the air from the leveling liquid.

Here's the first youtube video that came up.   I didn't take time to look through them to pick a good one, but this should show you how it works.  It would have made this job many times easier.  Cost was not any kind of issue, but these folks are just a little particular, and peculiar.  Those are the kinds I get along with fine.

 

  • Like 1
Posted

Some friends, and I were talking about tile work tonight.  I remembered that I left out a lot here for some of you that are figuring on doing it yourselves, and maybe haven't done it before.

One tool you absolutely need is at least one margin trowel.  You need to keep your hands out of the mortar as much as possible, so I like this one that hangs on the lip of the bucket, and keeps the handle clean.

https://www.homedepot.com/p/Bon-Tool-5-in-x-2-in-Pro-Carbon-Steel-Bucket-Margin-Trowel-Wood-Handle-14-456/305903928

Our HD doesn't stock those, so check yours online first.

You will probably want two margin trowels.  They come in different lengths.  You can get more covered in less time with an 8" one, but you need to have arms used to working.  Make your second one a Marshalltown with the red rubberish handle.  Home Depot does stock those.  Rose Brothers is normally my favorite brand of trowel, but for tile work, it makes no sense in using a leather handle in tile work, and your hands will be tender from the lime in the wash water, so the soft handles are nice.  I'd like it better if Bon Tool made that bucket trowel with a soft handle.

Posted

We worked on this job today, since it was a job we didn't have to heat up after we arrived.  I've figured out a better way to use the levelers.

Before, I had only used 4 levelers per tile, as seen on youtube videos.  The trouble with the levelers is that they won't push the tile being laid down below the level of its mate.  Like this, if there was some variation in the middle of the long side, there was not much you could do about it.  Using the screw caps as feelers, with four on the long side, the "clicks" can be split between the middle and the end.  It's better to have a light click on both the middle, and end, than to have one larger click in the middle.

The lippage is still not bad.  The Tavy puck    https://www.amazon.com/Tavy-Marble-Level-Lippage-Detector/dp/B002FYE1LS      won't click anywhere on the floor, but anything out of perfect is noticeable to me with these tiles.  There is no getting this kind of tile perfect though.  The red screw caps are more particular "feelers" than the larger Tavy puck that I have used for so long.  The Tavy puck works fine on non perfectly flat topped tile with hard edges.

When shopping for whatever floor tile, get the kind that has some sort of turned down top edges.  These try to  look like the high ends ones, that can be laid perfectly flat, but to me, are much worse than the old type of floor tile that had the edges that gave you some leeway.

IMG_1181.JPG

  • Like 1
Posted

They recommend overlaps per tile manufacturers specs based on the curve they expect. In other words, almost all tiles recommend no more than 25-30% overlap in the running bond. This keeps low corners from lining up in the center most portion of a neighboring tile. Showing your  50% overlap running bond immediately tells me why you say your lippage still exists.

Posted

I know that recommended overlap, and so did the owners.  It's even on the boxes of tile. They didn't want it any other way than this, and I have to agree that it looks a bit odd to me to have the smaller overlap.  If the normal, ordinary, or recommended way would have been what they wanted, they probably never would have come to me.  I've never worked for this couple before, but their house is just a couple of doors over from the one that I put the standing seam roof on, and that guy sent them to me.

The lippage we have is negligible, but it does take a bit more effort to minimize it.  It's not even as much as the thickness of a sheet of paper, like this, and that not in many places.  I'm not convinced that this tile would have been any better installed the recommended way.  Some are nice and flat, some are concave, and some convex.

I recommended, soon after we started, that they switch to some other tile, but they didn't want to have to think about it any more.   I'm sure they'll be satisfied with it, and I will know a lot more about what large tile to use in the future.

Posted

At the T intersection it doesn't matter so much if the straight 'through' tile edge is a tiny bit high, but if the corners are even a hair high it gets much more uncomfortable.

Posted

I agree.  Since some are convex, and some concave, we're alternating rows after sorting through them.  The four levelers in that  layout, as in the picture, lets me drop the corners a hair, and still keep the corners on the already laid tile a hair below.  I could still level the corners with only two on the long side, but the long edge may have been noticeably high.  If needed, I can push down with the middle ones, which will lower the corner that otherwise couldn't be lowered.

It's still no fun though.  Maybe one out of five tiles, I'll have to take it up, and find a better candidate.  I'll be glad when it's done, and will know better next time what to take on to start with.  If the floor had been flat, and level, it wouldn't have been so bad.

The Tavy puck says there is no lippage anywhere.  I'll try to remember to get a picture of the bottom of it, with a straight edge, today.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 34 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined