curlyoak Posted March 24, 2019 Report Posted March 24, 2019 What is the going rate for shop time today? Thanks for your reply. Quote
RichardA Posted March 24, 2019 Report Posted March 24, 2019 I think you're going to find that it varies according to location and customer base. It also depends on time for the project, consumables, and what you value your experience at. Quote
..Kev Posted March 24, 2019 Report Posted March 24, 2019 Yea, I've seen quite a variance in other's shop rates. It really does depend your target clients and what that market will handle. Quote
Chestnut Posted March 24, 2019 Report Posted March 24, 2019 If you have to ask you can't afford me . I have no idea, but i'd guess between $50 and $100. Quote
Popular Post Coop Posted April 9, 2019 Popular Post Report Posted April 9, 2019 On 3/24/2019 at 1:38 PM, Chestnut said: If you have to ask you can't afford me . I have no idea, but i'd guess between $50 and $100. I just made a $600 cutting board 5 Quote
BillyJack Posted June 22, 2019 Report Posted June 22, 2019 In 1983 it was $25 an hour per employee. So if a customer wanted a board ran through the planer t was $25 even if it took 5 minutes. If it required 2 guys it was doubled. Quote
Bankstick Posted June 22, 2019 Report Posted June 22, 2019 Sign in a Ford dealer in 1971- Shop Rates- $25 per hour $50 per hour if you watch $100 per hour if you help 1 1 Quote
Tom King Posted June 23, 2019 Report Posted June 23, 2019 Boat repair shops around here were 135 a few years ago, when I noticed a sign in one. The cheapest mechanic around here is 60 an hour, but from what I've heard, the bill you get ends up more than that.. I would guess around 75, on average. Quote
Tom King Posted June 23, 2019 Report Posted June 23, 2019 On 4/8/2019 at 10:31 PM, K Cooper said: I just made a $600 cutting board It took you a whole day to make a cutting board? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.