Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Some DC adapters

Featured Replies

  • Popular Post

The other day someone (can't remember who or what forum) posted about making vacuum hose adapters for sanders, which gave me some inspiration. My Bosch sander has a filter & pretty good collection on its own, but I wanted to be able to connect the shop vac to it. So I had a 3/4" PVC coupling laying around the I did a little cutting, filing & sanding to make an adapter:

The coupling is a nice snug fit inside the vacuum hose & the 2 cuts allow it a secure friction fit onto the sander. It is not an airtight fit by design because I didn't want too strong a vacuum at the sander.

1365709766_ROS1.thumb.jpg.41314c28a0965b9c8051ee240a0ba9fc.jpg

918912276_ROS2.thumb.jpg.c5ab6163a8c9e900065123dee753b934.jpg

 

he Makita belt sander was a little more difficult because it has a rectangular port. I used a piece of 1.5" ABS, heated & formed it to fit the port. While the plastic was still hot, I clamped it against the sides of the port, which molded it to the ridges on the port & keeps the adapter locked in place. 1.25" pipe would have been a better fit on the port, but the 1.5" pipe is just the perfect size for at tight friction fit on the vac hose.

1301617183_Beltsander1.thumb.jpg.c9d4bfedb6d4c7dc1e9e3c90865cab29.jpg

151676864_Beltsander2.thumb.jpg.a7932723cccf61dca8ab25aeeabd68d2.jpg

I'm not sure what adapters are available commercially, but I had the materials on hand & both of them only took about an hour to do and  work very well. Both are easy to put on & take off and are secure in use.

 

Love the rectangle dust port on the belt sander....

I ran into problems with the Domino. Hard to use without dust collection. I ended up with a card board tube some clamps and a waste line. Ran about 30 foot of line to a shop vac.  Count hear the shop vac but could hear the suction on the Domino. Worked like a charm.

 

 

 

kref111.jpg

  • Author

The next one to tackle is my old Lamello. It just has a rectangular hole, no flange or anything to attach an adapter to. It's going to involve a little metal work I think.

12 hours ago, BillyJack said:

Love the rectangle dust port on the belt sander....

I ran into problems with the Domino. Hard to use without dust collection. I ended up with a card board tube some clamps and a waste line. Ran about 30 foot of line to a shop vac.  Count hear the shop vac but could hear the suction on the Domino. Worked like a charm.

 

 

 

kref111.jpg

BJ, whose clamps are those? Pretty cool! 

  • Popular Post

If your good at using 3d fusion, you can design any adapter you need and 3d print it. I 3d printed drawer handles for my custom sawstop outfeed table and an 2 inch hose adapter for my bosch router. Also a 3d router plate and router template to cut hole for drawer handle to go into. Of course if your nerdy you can print other cool things. All these files I printed were free, but like I said you can learn 3d fusion and design anything and the program can 3d print it. Everything you see there minus the batman headset holder cost about 5$ worth of filament minus the 3d printer itself which I paid 280 for

20201016_122532.jpg

20201013_163932.jpg

The 3D printer plastics that I've seen are very stiff and hard.  Are there any softer or more elastic options?

  • Author

I'm afraid 3D printing is above my pay grade & there's too much I want to do with wood to take the time & expense of getting into it. But sometimes I wish i did, like making those adapters.

2 hours ago, Mark J said:

The 3D printer plastics that I've seen are very stiff and hard.  Are there any softer or more elastic options?

Yes its called flex something, but its properties are like rubber

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.