Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Scratch on Sole of New Plane

Featured Replies

I just got a LN #4, and naturally on the first project I somehow managed to get a deep scratch in the sole (see attached). When you run your finger across the sole, you can feel the indentation from the scratch. Should I do anything to try to get this out, or just leave it be? Since this is very new, I am concerned that any fixes that I might pursue would do more harm than good.

PlaneSole.jpg

  • Author

I just got a LN #4, and naturally on the first project I somehow managed to get a deep scratch in the sole (see attached). When you run your finger across the sole, you can feel the indentation from the scratch. Should I do anything to try to get this out, or just leave it be? Since this is very new, I am concerned that any fixes that I might pursue would do more harm than good.

I don't think you want to take that much off the whole sole, but it may not be as deep as it looks in a picture.  What in the world were you planing?

  • Popular Post

No picture attached. If there’s a burr along the edge of the scratch, take that off. Otherwise just leave it and watch for nails/screws/staples. Is there a nick in the edge of the blade?

I doubt the scratch is deeper than this...

image.thumb.jpeg.ff2e0091ba1461974066ec44f89776d5.jpeg

I think you will create more of a problem by trying to remove that scratch.  I might take a piece of very fine sand paper, like p2000 or p3000 on a wooden block and gently wipe down the sole with the idea of removing any burr you may have created. 

Like Tom said, you do want to figure out how it happened and how to avoid it in the future.   But after that, it's like the dimple I put in the tailgate of my new truck--a reminder of how not to park.

  • Author
50 minutes ago, Tom King said:

I don't think you want to take that much off the whole sole, but it may not be as deep as it looks in a picture.  What in the world were you planing?

Just a piece of western red cedar for a planter. This was rough cut stock left over from a pergola. The only thing I can come up with is that there was a rock or small piece of metal embedded in the stock that I didn't see.

I was looking at the LN maintenance video, and they mentioned that you can send tools back into them for the "spa treatment" for issues that you can't address on your own. Has anyone done this? Just wondering what my options are if the scratch leaves marks on the wood. Don't want a 350 buck brick in the shop.

  • Author
13 minutes ago, Mark J said:

How much is the spa treatment?

No idea. They mention it in passing in a video but don't say what it is. Can't find it referenced elsewhere on their site. 

  • Popular Post

Does it include a foot massage or just the sole?

 

2 hours ago, TomInNC said:

I was looking at the LN maintenance video, and they mentioned that you can send tools back into them for the "spa treatment" for issues that you can't address on your own.

You really should be able to deal with this yourself by doing the sand paper techniques mentioned above.  I had a scratch like yours in the bottom of my Veritas Smoother. and it took very little effort with sand paper.  Can I still see and feel the scratch? Yep, but it has absolutely no effect on the working results of the plane.

I don't think it's much to worry over. Try and avoid things that will scratch the sole though as that will nick the blade and that's more annoying.

It won't take much to flatten any burrs to make it not matter at all.

My Smoothers don't touch anything, unless something else has been over the surface first.  Mostly because I don't want to regrind the irons.  I don't have any newer, or prettier than the one JohnG posted a picture of.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.