BillyJack Posted December 29, 2024 Report Posted December 29, 2024 I never thought woodworking forums would mainly be chat forums. On many other forums you can expect 99% percent talk.and not mainly about woodworking. Are woodworkers just not building things anymore? Bored with building things? Age? 1 Quote
Chet Posted December 29, 2024 Report Posted December 29, 2024 Other forms of social media would be my main guess. 2 Quote
Popular Post wtnhighlander Posted December 29, 2024 Popular Post Report Posted December 29, 2024 Chet is probably right. This sort of forum is falling out of favor, being replaced by things like Facebook Groups. Personally, I find those extremely frustrating to use, but even places like Reddit or Sawmill Creek are so cluttered with background noise that I don't bother with them. Frankly, Woodtalk is the only 'social' platform that I participate in. 4 Quote
BillyJack Posted December 29, 2024 Author Report Posted December 29, 2024 I was banned from Woodtalk many moons ago over Sawstop. I don’t think I can even reregister there Quote
Von Posted December 29, 2024 Report Posted December 29, 2024 Agreed. I suspect with the churn of new woodworkers, it's hard for those who have been around not to get tired of the same-old-same-old and retreat. The local woodworking groups around me tend to use email lists (which have their own issues). I am in several FB groups and I find they are much more "transactional" - announcements, stuff for sale and simple Q&A. Useful for that, but tot very useful for conversations, journals, etc. And they are hard to search. Quote
BillyJack Posted December 31, 2024 Author Report Posted December 31, 2024 Some regulars have been run off forums. Being told they don’t carry much weight or have better things to do. I remember when it first started all the stars of woodworking were on to contribute. After a lot of arguing, many left 2 Quote
BillyJack Posted December 31, 2024 Author Report Posted December 31, 2024 On 12/29/2024 at 11:18 AM, wtnhighlander said: Chet is probably right. This sort of forum is falling out of favor, being replaced by things like Facebook Groups. Personally, I find those extremely frustrating to use, but even places like Reddit or Sawmill Creek are so cluttered with background noise that I don't bother with them. Frankly, Woodtalk is the only 'social' platform that I participate in. Sawmill creek has too many off the wall posts. Woodworkingtalk and its others are the same… 1 Quote
wtnhighlander Posted January 1, 2025 Report Posted January 1, 2025 That's what I like here - while the active group is small enough that project journals are a little sparse right now, we are also familiar enough that the "off topic" posts seem like shooting the breeze with a bunch if good friends. It would be nice to have more new ideas in the mix, but folks have been working wood so long, not much 'new' is left. Anyone have a laser engraver, CNC router, or other new-fangled tool you'd like to talk about? 2 Quote
Popular Post fcschoenthal Posted January 1, 2025 Popular Post Report Posted January 1, 2025 On 12/31/2024 at 10:12 PM, wtnhighlander said: Anyone have a laser engraver, CNC router, or other new-fangled tool you'd like to talk about? As a matter of fact, I do. I just bought a cheap (if there is such a thing) 20W Atomstack laser to play with. Don't know what I'm going to do with it yet, but seems like a lot of possibilities. If nothing else, it will amuse the grandkids as much as the little 3D printer I got a couple of years ago. I've used it to print out a lot of little things for the shop. I don't sell things, so the laser won't be used for "craft projects", but I can see it being used for making templates and engraving text of gifts. 3 Quote
wtnhighlander Posted January 1, 2025 Report Posted January 1, 2025 What is the working area that laser will cover? The ability to engrave text cleanly is the one aspect of CNC machines that attracts me. I work with computers and machine controls at my day job, and try to avoid them in my hobby, but engraving is so tedious, I may make an exception. 1 Quote
Popular Post fcschoenthal Posted January 1, 2025 Popular Post Report Posted January 1, 2025 On 1/1/2025 at 9:19 AM, wtnhighlander said: What is the working area that laser will cover? The ability to engrave text cleanly is the one aspect of CNC machines that attracts me. I work with computers and machine controls at my day job, and try to avoid them in my hobby, but engraving is so tedious, I may make an exception. The specs are 400x400mm (or about 15½x15½"), but it's an open frame, so it can be placed anywhere on a piece. I think that tiling is available through software, but haven't gotten there yet. I haven't even loaded up the software onto the laptop. We're going on a cruise in a couple of days and have too much else to do instead of play with new toys. I've been given "permission" (like it's ever stopped me before) to get a CNC, but my shop is WAY too crowded to house one right now. I too have a tech background (was building PCs from parts in the early 80's) and worked as an IT Project Manager (hardware side) for 30 yrs before retiring a couple of years ago and also have a degree in Information Systems. 2 1 Quote
Popular Post Mark J Posted January 1, 2025 Popular Post Report Posted January 1, 2025 2 hours ago, fcschoenthal said: As a matter of fact, I do. I just bought a cheap (if there is such a thing) 20W Atomstack laser to play with. When you start to get into this, maybe post some detail in the CNC section. 3 Quote
BillyJack Posted January 2, 2025 Author Report Posted January 2, 2025 Chat forums should never have post counts…. Im also curious on the roll politics will soon play on tool purchases. Quote
wtnhighlander Posted January 2, 2025 Report Posted January 2, 2025 You mean like what tarrifs may do to import tool pricing? Quote
Coop Posted January 3, 2025 Report Posted January 3, 2025 On 1/2/2025 at 11:35 AM, BillyJack said: Im also curious on the roll politics will soon play on tool purchases. As long as they are made here in the states, it shouldn’t be a problem. I’m done shopping in China anyway. My concern is the price of tequila going up. 2 Quote
BillyJack Posted January 3, 2025 Author Report Posted January 3, 2025 I have several bottle of of tequila, Vodka concerns me You won’t get away from China made products, at least for the time being.. 1 Quote
Popular Post gee-dub Posted January 3, 2025 Popular Post Report Posted January 3, 2025 On 12/29/2024 at 9:04 AM, BillyJack said: Are woodworkers just not building things anymore? Bored with building things? Age? Age, yes for me. I have a list of things to build for the home that will keep me busy until I should probably stop schlepping large pieces of lumber and running medium sized machines. I also don't build any pieces for others for money anymore. I have a reasonable stock of keep sake boxes and so forth on hand for holidays and weddings so yes, definitely slowing down. 3 Quote
BillyJack Posted January 3, 2025 Author Report Posted January 3, 2025 I have a lot to build, but After doing the roof and getting pneumonia, I’ve been out of the shop since spring. I started working on the window next to the bar. I’d really like to complete this and move to the next project, but I’ve been stuck with no energy from having the pneumonia. People just aren’t excited about woodworking like the were. The router forum…. It was a great forum to fix, learn about and use routers. Today it’s turned into nothing but CNC. If you use a CNC it’s great, otherwise a waste of time now.. 2 Quote
Popular Post BillyJack Posted January 3, 2025 Author Popular Post Report Posted January 3, 2025 On 1/3/2025 at 11:42 AM, gee-dub said: Age, yes for me. I have a list of things to build for the home that will keep me busy until I should probably stop schlepping large pieces of lumber and running medium sized machines. I also don't build any pieces for others for money anymore. I have a reasonable stock of keep sake boxes and so forth on hand for holidays and weddings so yes, definitely slowing down. I’m glad to see you building things. The forums get pretty boring talking about “How to upgrade my table saw” Most woodworkers just stick around to find out what theywant and leave, nice to see some construction.. 2 1 Quote
Popular Post Chet Posted January 3, 2025 Popular Post Report Posted January 3, 2025 On 12/31/2024 at 8:12 PM, wtnhighlander said: Anyone have a laser engraver, CNC router, or other new-fangled tool you'd like to talk about? On 1/1/2025 at 5:36 AM, fcschoenthal said: As a matter of fact, I do. I just bought a cheap (if there is such a thing) 20W Atomstack laser to play with. Don't know what I'm going to do with it yet, but seems like a lot of possibilities. If nothing else, it will amuse the grandkids as much as the little 3D printer I got a couple of years ago. I've used it to print out a lot of little things for the shop. I don't sell things, so the laser won't be used for "craft projects", but I can see it being used for making templates and engraving text of gifts. There is one aspect that I don't see getting discussed with laser engravers. They put off some pretty nasty smoke and fumes, seen and unseen. I haven't seen to much discussion about proper exhaust systems for lasers some of the gases can be just as harmful or more harmful then the fines created by your woodworking tools. I have seen some on YouTube talking about inclosing the laser but that doesn't really solve anything because if you don't exhaust it to outside air the fumes are still there when you open the enclosure. So if you are looking at getting a laser engraver, look at the exhaust end of things too. Be safe. 4 Quote
wtnhighlander Posted January 4, 2025 Report Posted January 4, 2025 That's a good point, Chet. One that concerns me whenever I consider buying one. Your comment nade me remember seeing tbis recently: Granted, the air purifier is bigger than the engraver itself, but it seems to do a pretty good job. 1 Quote
Chet Posted January 4, 2025 Report Posted January 4, 2025 On 1/3/2025 at 6:17 PM, wtnhighlander said: Granted, the air purifier is bigger than the engraver itself, that can be pretty common actually. I had looked into a Laser engraver at one time for my awards business. It had a bed that was 24" X 30" and was fully inclosed. The air filter system for that was about the size of a mini fridge. 2 Quote
BillyJack Posted January 11, 2025 Author Report Posted January 11, 2025 Maybe my projects are too advanced for most woodworkers? I’ve had complaints about being a payed employee in woodworking? I try to share experience, I’m not a YouTube trained woodworker. I share real shop experience and have been criticized for being a skilled shop and they are only hobby woodworkers. What does that have to do with doing it correctly? I know, it’s my complaint da I guess..Too many snow days.lol 2 Quote
Popular Post wtnhighlander Posted January 11, 2025 Popular Post Report Posted January 11, 2025 @BillyJack, I think your question answers itself. In a for-profit woodshop, the "correct" process is generally one that achieves the end result for the least cost in time and materials. Also, for-profit shops often have the advantage of bulk purchasing power, which allows better quality materials for the budget. Hobbyists are usually making things for themselves, family & friends, or just to gather experience. In those cases, although the end product may be exactly the same piece of furniture, the "correct" way to reach the goal may have no limitation on time or budget. In either case, we can all benefit from each others experiences. I'm grateful for the knowledge shared by the pros, as well as the amatures. 5 Quote
pkinneb Posted January 12, 2025 Report Posted January 12, 2025 On 1/11/2025 at 4:42 PM, wtnhighlander said: @BillyJack, I think your question answers itself. In a for-profit woodshop, the "correct" process is generally one that achieves the end result for the least cost in time and materials. Also, for-profit shops often have the advantage of bulk purchasing power, which allows better quality materials for the budget. Hobbyists are usually making things for themselves, family & friends, or just to gather experience. In those cases, although the end product may be exactly the same piece of furniture, the "correct" way to reach the goal may have no limitation on time or budget. In either case, we can all benefit from each others experiences. I'm grateful for the knowledge shared by the pros, as well as the amatures. Agreed and I would also add that there is seldom only one way to do things in woodworking. Typically there are many right ways whether an amateur or a professional 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.