Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bent Lamination

Featured Replies

I don't see why not, but do some sacrificial testing to see just how tight it will bend. And use epoxy or some other low creep adhesive.

  • Popular Post
13 hours ago, Chet said:

Has any one here ever used or even know if you can use maple for a bent lamination project.  

Yep works fine. As far as bending goes maple performs the same as any other wood i've tried. Keep i mind with any bent lam that having bad grain roun out can detail the bend. It's just harder to see the grain run out on maple. Post about the project, I don't know why but I love bent lamination. It's just a fun technique.

10 hours ago, wtnhighlander said:

Mapel's lack of graininess might be a problem, making the layers more noticable along the edges.

I think this is an issue with the light color as well as the lack of prominent grain espically if using an adhesive that is darker in color. I'd do some testing for sure.

  • Author
  • Popular Post

The bent lamination is for drawer fronts.  It is a case on stand project.  I wanted a lighter wood for the case portion and a darker wood, maybe cherry or sapele for the stand.  Or I may end up making it all from one species, who knows.

This is a prototype of the draw front.

IMG_1311.thumb.JPG.6866c8fbb4ba7365b3f19b68940a22a5.JPG

This is a miniature, basic prototype of the whole project.  I have it setting on the counter so I see it during the day, deciding if I like the dimensions and proportions.  The drawer box dimensions are 15" wide, 12" deep and 5" high and float over each other.  The stand is 26" tall.

IMG_1315.thumb.JPG.eda5b5a2a1feea47b7570bc59ab3f816.JPG

Do you have a drum sander? I did mine down to 1/16” using it with walnut. 

21 hours ago, Chet said:

This is a miniature, basic prototype of the whole project.  I have it setting on the counter so I see it during the day, deciding if I like the dimensions and proportions.  

Unsolicited (and perhaps unwelcome) opinion:  Aesthetically, it looks top heavy to me.  I do like the general idea of the design, though.

  • Author
  • Popular Post
On 5/16/2025 at 7:03 AM, Mark J said:

Aesthetically, it looks top heavy to me

At this point I agree.  That was the fourth iteration and the one I liked the most but I still didn't totally like it.  That the nice part of working with super glue, it comes apart easily and on to the next idea.

It does look a little top heavy for the width. Does the piece need to be 41" tall? Reducing the drawer height or stand height might make a difference. I usually make some measured drawings on graph paper with different dimensions to hone in on the look I'm after.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.