legenddc Posted August 27 Report Posted August 27 I saw Harvey just announced a new table saw that protects your hands from being cut. Sawstop like protection but without your hand hitting the blade and the blade doesn't get destroyed. I'm sure more information will be out soon. Here's what I was able to find: https://toolguyd.com/harvey-dream-table-saw-announcement/ 2 Quote
Mark J Posted August 27 Report Posted August 27 I saw a similar announcement. It looks pretty cool, but I imagine it will be a pretty stiff price. Quote
Popular Post Chet Posted August 27 Popular Post Report Posted August 27 "Besides the non-contact flesh detection, the next big takeaway is that Harvey’s blade retraction mechanism does not destroy your blade. Also unlike SawStop table saws, there is no cartridge to replace. You reset the saw and get back to work." This was in the link the @legenddc Posted. Just resetting the saw and getting back to work may not be the best option. You just did something that was almost an accident, maybe it is time to step back, review and re-think what you were doing. 7 Quote
Beechwood Chip Posted August 27 Report Posted August 27 On 8/27/2026 at 11:44 AM, Chet said: You just did something that was almost an accident, maybe it is time to step back, review and re-think what you were doing. I always thought that the destructive Sawstop brake was a feature, not a bug. 1 Quote
legenddc Posted August 27 Author Report Posted August 27 On 8/27/2026 at 11:44 AM, Chet said: "Besides the non-contact flesh detection, the next big takeaway is that Harvey’s blade retraction mechanism does not destroy your blade. Also unlike SawStop table saws, there is no cartridge to replace. You reset the saw and get back to work." This was in the link the @legenddc Posted. Just resetting the saw and getting back to work may not be the best option. You just did something that was almost an accident, maybe it is time to step back, review and re-think what you were doing. If my hand got close enough to set that off I would be done for the day. At the very least I'd need to go change my shorts! 1 Quote
Popular Post wtnhighlander Posted August 27 Popular Post Report Posted August 27 Frankly, this non-destructive method is the only way I'd pony up the initial cost. Replacing brakes and blades after every trigger (valid or not) adds up quickly. I've heard way to many people relate stories about triggering the SS that had nothing to do with sensing 'flesh'. 3 Quote
Beechwood Chip Posted August 28 Report Posted August 28 My Sawstop has only triggered twice. Once was legit, and the other was a friend who said, "I swear I didn't touch the blade! I mean, my finger was near the blade, really near the blade, but I was being careful! I don't know why it triggered!" 2 Quote
Botch Posted August 28 Report Posted August 28 The following is a more general comment on accidents, and SawStop the original company. The statistics we have on tablesaw accidents in the US are sadly primitive. It's basically one number: how many tablesaw accidents were there in a given year. It should be six: 1, 1a: Did the User run his hand/finger directly into the blade? And if so, were the supplied safety features (riving knife/blade guard/anti-kickback pawls) in place? 2, 2a: Did the User get cut by the blade as a result in a kickback pulling his hand into the blade? And if so, were the safety features in place? 3, 3a: Did the User get injured by the material being cut kicking back, with no contact to the blade? And again, safety features in place? My guess is that 1 rarely happens, 2 occasionally, and the majority of tablesaw accidents are #3; and I would like to see if any accidents happened in Scenarios 1a, 2a and 3a. One of my required college courses was "Topics in Industrial Engineering", and it was actually very interesting and a nice break from all the math; we learned about patent laws, labor relations, government regulations, environmental issues, insurance, etc. One of the case studies was of the original developer of the SawStop brake; he designed it, patented it, then tried to sell it to the major tablesaw manufacturers, who all turned him down (too expensive). At first, he decided to give bribes campaign donations to his senators, and require his safety system on all new tablesaws; that was debated in congress for a long time and the woodworking mags of the time covered it well. This is why I will never buy a SawStop, a system that only addresses a small part of the problem (1 and 2 above). He eventually got enough investment to start his own tablesaw company, which is now quite successful, despite its price. The current company (I believe the original patent designer sold his rights) still touts that single statistic about "total tablesaw accidents/year", which still sticks in my craw (I have a heavy background/training in Statistics/Reliability), the brake only addresses a very small part of the total accident rate. Sorry about blabbing on, I'm retired and sometimes bored; let me end this on a lighter note. First, what kind of dummy would run his finger into a tablesaw blade? Raises hand. I did it, once, nicked my index fingernail; it kicked my finger back and hurt quite badly, but no blood was spilled (I was lucky). My summer job from Jr High to the end of college was building office trailers: https://www.google.com/imgres?q=Office trailer&imgurl=https%3A%2F%2Fwww.triumphmodular.com%2Fwp-content%2Fuploads%2F2024%2F03%2Fa637b10be8f2400d53aaced22013b299.png&imgrefurl=https%3A%2F%2Fwww.triumphmodular.com%2Fmobile-offices%2F8x24-office-trailer%2F&docid=Wv2v5Zw5i0fjZM&tbnid=p2p-Cie-AlD9jM&vet=12ahUKEwir8__3n8KWAxVmJUQIHaLvGQoQnPAOegQILBAA..i&w=1920&h=1080&hcb=2&ved=2ahUKEwir8__3n8KWAxVmJUQIHaLvGQoQnPAOegQILBAA Most were skinned with aluminum, but some nicer/more permanent ones were skinned with a Masonite-type product, then trimmed on the corners with a softer sheet material they called "buffalo board". Our plant tablesaws all had the guards removed (until OSHA showed up), and I often cut the "buffalo board" freehand as I could do the angles accurately; that's how I nicked my fingernail. I also got hurt in a kickback, had to rip down some low-quality 2x4s for some 1x2 beltrails, I was using a fence but no guards; one board had internal stress, twisted, and kicked back at me. A standard tablesaw is 36" high and my inseam is 37" w/o work boots, you do the math. When I opened my eyes half the crew was standing over me in a ring, not with looks of concern but laughing their a**es off (jerks!) 2 Quote
Tpt life Posted August 28 Report Posted August 28 I would have thought 1a was rare, but then Jamie of Perkins Builder Brothers, got working late at night, with ear pro on, forgot his jointer was on, and now has a lot of missing finger. I’d like to know less about how the injury happened, and more about the mental condition and distraction of the operator. Most injuries I have seen, were aggressively pushing production…past the point of distraction less operation. One guy, both pointers trimmed, and many kickbacks, thankfully on underpowered job site saws. 1 Quote
Von Posted August 28 Report Posted August 28 1b: Was the machine on at the time? I've heard Marc/TWW speculate about the number of injuries that happen after the machine is turned off but the blade is still moving due to inertia. I notice in myself that I have a tendency to go out of "danger" mode when I hit the off switch and catch myself reaching for an offcut, something I would instinctively never do with the machine on, before things have stopped moving. My bandsaw in particular takes a while to spin down. I can also completely understand forgetting a machine is on, especially with hearing protection on. Knock on wood, all of my power tool incidents have been minor and all kickback related, no blade contact. I found I figured out the table saw fairly quickly, but incidents on the miter saw plagued me longer into my hobby. I believe getting a ZCI on the miter saw was the most helpful safety upgrade I've made and I've had no issues since. 1 Quote
Popular Post pkinneb Posted August 28 Popular Post Report Posted August 28 Just my two cents on this one. Like all insurance its really less about statistics and more about covering you if and when a catastrophic event/ accident occurs whether it is 1 of a 100 or 20 of a 100 is really kind of a non issue. I think in my 10+ years of ownership I have tripped mine twice $160 in bake costs, both accidents. Now I do bypass the feature if it is at all questionable. Having the same feature without damaging the blade (mine were totally fine in both triggers) and no brake would be awesome if its competitively priced and overall same quality. I think one thing that is constantly overlooked in the whole SawStop drama is that with or without the brake this is one of the best table saws on the market period! Sorry just my SS fanboy opinion 3 Quote
Popular Post Chet Posted August 28 Popular Post Report Posted August 28 On 8/28/2026 at 6:04 AM, pkinneb said: this is one of the best table saws on the market period! Not to mention the quality of their instructions for assembly. 3 Quote
Popular Post fcschoenthal Posted August 29 Popular Post Report Posted August 29 I've seen a couple of demo videos of the saw and still have some questions about the process. I've only seen activations where fingers alone are coming directly at the blade, not from the side, top or with a piece of wood in the mix. I'd have to see more before I'd be convinced. Also one feature that I heard about on one of the videos was that the blade could tilt both left and right. 3 Quote
Ron Swanson Jr. Posted August 29 Report Posted August 29 On 8/28/2026 at 10:23 AM, Chet said: Not to mention the quality of their instructions for assembly. Still the best instructions and packaging for any product I've ever seen. They really knocked it out of the park. 2 Quote
Mark J Posted August 29 Report Posted August 29 4 hours ago, fcschoenthal said: I've seen a couple of demo videos of the saw and still have some questions about the process. I've only seen activations where fingers alone are coming directly at the blade, not from the side, top or with a piece of wood in the mix. I'd have to see more before I'd be convinced. Also one feature that I heard about on one of the videos was that the blade could tilt both left and right. Yeah, I'd want to see that it works with a maximum thickness board, like 3 1/4 inches. Quote
Popular Post Chet Posted September 3 Popular Post Report Posted September 3 So I just heard on a podcast that the scuttlebutt has this Harvey Dream Saw hitting the market at around $20,000. So it sounds like it isn't a dream saw so much as an "in your dreams saw". At least for the general and level headed hobbyist. 2 2 Quote
Beechwood Chip Posted September 4 Report Posted September 4 On 9/3/2026 at 8:00 PM, wtnhighlander said: I bet Stumpy Nubs will have one ... Is it a small, American, family owned business? 2 Quote
Mark J Posted September 4 Report Posted September 4 13 hours ago, Chet said: So I just heard on a podcast that the scuttlebutt has this Harvey Dream Saw hitting the market at around $20,000. So it sounds like it isn't a dream saw so much as an "in your dreams saw". At least for the general and level headed hobbyist. Maybe they'll have one of their flash sales. Today only, $19,500! You save $500! 2 Quote
pkinneb Posted September 4 Report Posted September 4 On 9/3/2026 at 5:49 PM, Chet said: So I just heard on a podcast that the scuttlebutt has this Harvey Dream Saw hitting the market at around $20,000. So it sounds like it isn't a dream saw so much as an "in your dreams saw". At least for the general and level headed hobbyist. Whoa!! I thought their new drill was pricey but hey if you can afford it... On a more serious note bringing the tech to the marketplace will at least give them a chance to prove it in and hopefully someday we can afford to buy it from some one if we choose. In the mean time I can buy a lot of brake cartridges and blades (if needed) for the $16K premium over my SS. After watching addl vids on it the only thing that gives me serious pause so far is the big screen in front of the saw. It seems like that would get in the way even when folded down. I look forward to reviews on this and their DP in the future. 2 Quote
Popular Post legenddc Posted September 4 Author Popular Post Report Posted September 4 On 9/4/2026 at 10:30 AM, pkinneb said: Whoa!! I thought their new drill was pricey but hey if you can afford it... On a more serious note bringing the tech to the marketplace will at least give them a chance to prove it in and hopefully someday we can afford to buy it from some one if we choose. In the mean time I can buy a lot of brake cartridges and blades (if needed) for the $16K premium over my SS. After watching addl vids on it the only thing that gives me serious pause so far is the big screen in front of the saw. It seems like that would get in the way even when folded down. I look forward to reviews on this and their DP in the future. Seriously. You could buy multiple Sawstops and not have to even slow down in a brake cartridge went off. 1 3 Quote
Ron Swanson Jr. Posted September 4 Report Posted September 4 On 9/4/2026 at 9:36 AM, legenddc said: Seriously. You could buy multiple Sawstops and not have to even slow down in a brake cartridge went off. You could go from zero to a very well outfitted shop with many, many amenities and still have enough left over for a short vacation. That's such a ridiculous price for a table saw that is almost insulting. 1 Quote
Mark J Posted September 4 Report Posted September 4 For a commercial facility, maybe, but only maybe. Quote
gee-dub Posted September 5 Report Posted September 5 For $20k I would be looking at a small slider. I'm not sure who their target market is but it is fun to watch. 1 Quote
Beechwood Chip Posted September 5 Report Posted September 5 On 9/5/2026 at 4:44 AM, gee-dub said: For $20k I would be looking at a small slider. I think the Dream Saw is a slider. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.