Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

DIY Router table wood choice

Featured Replies

DISCLAIMER: I am a total noob; this is my first post on this forum.

I am planning on getting into the craft of woodworking by building the router table found at http://www.woodsmithshop.com/download/303/routertable.pdf. I am having a hard time deciding what wood would be appropriate for such a project; on the one hand, it seems that a router table should be made of a hard, durable wood that won't warp or bend over time (maple or oak?), but on the other hand, this isn't exactly fine cabinetry, and in all honesty, I'm probably going to need more than the minimum number of boards to get the job done, so price is definitely a factor. Would it be okay to use a cheap softwood on this project, or an in-between wood, like poplar?

Thank you so much!

You want the top of a router table to be dead flat and stable, so using any hard or softwood is a bad idea...laminated MDF is probably your best choice. The base doesn't matter...whatever is cheap and accessible will work fine.

Baltic birch ply. I think i did mine (based on the woodhaven design) with under 2 sheets... 1 sheet 3/4 for the case and 1 sheet 1/2 for the doors/drawers/etc.. I think I had a bunch left over for many future shop jigs....

Baltic birch ply. I think i did mine (based on the woodhaven design) with under 2 sheets... 1 sheet 3/4 for the case and 1 sheet 1/2 for the doors/drawers/etc.. I think I had a bunch left over for many future shop jigs....

Take a look at the plan he posted...

Sorry... I was looking more at the inset plan with the enclosed cabinet, not the open frame plan... Yea, BB would not be the best choice...

You want the top of a router table to be dead flat and stable, so using any hard or softwood is a bad idea...laminated MDF is probably your best choice. The base doesn't matter...whatever is cheap and accessible will work fine.

I second this!

You can find laminated counter tops at the local big box store for really cheap, especially if you don't care what color/pattern. I picked up mine from Lowes for something like $6 for 3 foot wide section of counter (approximatley 2 feet deep).

If I understand your question correctly, you're asking about the wood to use for a frame, not the top. Yes, you'll want stable, and in this case (as in a bench) mass would be helpful. Oak will work, as would maple. I'm not really sure where you are, but one of my local stores sells "shorts", blanks no longer than six feet, at a discount. They would be good for this.

However, having said that: douglas fir would be fine. In fact, from the looks of your plan, well dried 2X4s could be milled to fit the bill.

  • 5 months later...

I've used 3/4 birch with Formica for decades.  Sometimes I'll set up 4 or 5 for one project, and never bought that many lifts.  I have a 1784 window sash project coming up, as soon as the custom cutters come, and I'll have 5 setup for that-all mortised.  Someone gave me a big sheet of synthetic bowling alley lane flooring.  This stuff looks like the ticket.  It's a little less than a half inch thick, machineable, but harder than a rock.

http://www.qubicaamf.com/en-US/Products/Lanes/SPLII-Lanes.aspx

 

Ask at a bowling alley.  The one near here just had some leftover pieces sitting in a storage room, only good to fit in the category of "too good to throw away", but nothing really to do with it.

Score on the bowling alley!!! I just put a phenolic slab (epoxyn lab work surfaces) on my table saw extension and am planning to build a router table out of the second slab. We found these on the side of the road. They retail for $600 a piece. Definitely look around and think outside of the box. This country loves to throw cool stuff away...

Another option is to buy the top with a phenolic insert, and attach it to a base you build yourself. The process of cutting the hole for the insert (with the accuracy necessary) can be frustrating for someone who is new to woodworking.

I agree with franklin!

 

If you have any metal skills, a welded frame covered with thinner wood of your choice would give you the stability you're looking for and leave a little extra in the budget to make it look a little nicer with veneer ply.

 

Just a suggestion.  Good luck!

So the plan calls for 2x4s.... so that means any stable wood that's cheap will do, if I remember my shtuff right.  (3 hours sleep, studying for two tests, don't quote me right now.)

 

If you can find a sale on shorts anywhere, wear them!  (er.....)  I mean, go for it.  My local Woodcraft just got some in, and if I didn't have to replace a head gasket, I'd be getting some marvelous maple at something like 2/3 off...  (and there are still some cherry shorts around from two months ago.... price on that may be dropping as well.  I hope.)

 

Otherwise, you could go metal, too.  Don't necessarily have to weld them, but if you don't, you'll have to check the bolts periodically that they are still tight.

 

I'd think you could use plywood, as long as it's laminated into the legs... but I've never done that, so I'm not going to give advice on how.  (But I do remember a couple plans on workbenches that use laminated plywood for the legs and frame.)

This is on old thread by a 1 post wonder that will likely never see your helpful replies.

  • 3 weeks later...

This is on old thread by a 1 post wonder that will likely never see your helpful replies.

:lol: no one saw the date!......but we were ON IT!!

Sometimes the answers aren't just for the OP ...

like this noob here (insert guy waving his hand here). This project isn't at the top of my needs, but it is on the list once I get my new router, my new workbench built, table saw, etc... 

 

thanks all for their responses. I'm bookmarking this page so I can refer back when the time comes!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.