Popular Post displacedhillbilly Posted October 3, 2013 Popular Post Report Posted October 3, 2013 I’ve been banging together a few projects here and there over the last couple of years and have acquired more and more hand tools. My current bench is a Sjoberg Hobbyist workbench (on sale at Woodcraft when I bought it for $100). It’s worked well, but i’m sick of it moving around when I try to do anything on it. So off to the internet I went in search of ideas for a bench. I’m a WoodWhisperer Guild member and his Roubo appealed to me…problem is…I don’t have that kind of scratch! I shopped around and finally found some plans from Shigshop.com. I purchased his plans because they were A. Affordable, and B. Had the specifications for dimensional lumber. Home Depot had 2×10x8ft Douglas Fir for $9.20 each, and i figured this was probably the cheapest/most convenient rout for me to go. In total, I picked up 14 of these boards and managed a 10% discount at the checkout. Score! They’ve been sitting in my shop for over a month, and I think it’s time I got moving on this bench! So this morning, I started the process of jointing a few of the boards, ripping them to width, and planing them to thickness. Then I started gluing… So, it may be ugly, but it’s started and its mine! I’ll have plenty of years to make it pretty, but I have to finish the majority of this bench by the holiday season! 3 Quote
G S Haydon Posted October 3, 2013 Report Posted October 3, 2013 I am really looking forward to this. The concept of humble but very suitable materials is a real plus point for me in projects. Quote
Dave H Posted October 3, 2013 Report Posted October 3, 2013 I built mine out of HD 2x6s I bought this screw from lee valley for my leg vice I bought my end vise from grizzly here is my finished bench I had maybe $350 in it http://www.woodtalkonline.com/uploads/gallery/album_515/gallery_2926_515_82536.jpg Good luck with yours enjoy the process 1 Quote
Eric. Posted October 3, 2013 Report Posted October 3, 2013 Gotta love YARB! Keep the journal going and don't be afraid to ask questions...there are a bunch of us who have been through the YARB gauntlet. Quote
displacedhillbilly Posted October 3, 2013 Author Report Posted October 3, 2013 Thanks guys! I'm actually making my own vises. I ordered 1 1/4" acme screws, a RH threaded for the leg vise and a LH threaded for the wagon vise. Got all the bearings & nuts & accessories from either ebay or other online retailers, and have found a local machine shop that will turn the collars on the screws for a small fee, but that needs to wait until the handwheels actually get delivered. The only thing that I really spent money on was the handwheels and leg vise. I ordered Kipp Wheels from Germany because I couldn't find any that I liked locally. I ordered a chain vise kit from Jim Ritter @ Ancora Yacht Services. The entire bench, vises and all comes in at just under $600 for materials thus far. I should be able to keep it under $700 by the time that I get misc lag screws, finish, extra glue, and have the acme screws turned. Quote
bobcrosley Posted October 9, 2013 Report Posted October 9, 2013 I'm really looking forward to seeing this come together. I've been kicking around the idea of a Roubo build out of dimensional lumber. Excited to see this one come to life. Quote
bobcrosley Posted November 8, 2013 Report Posted November 8, 2013 Any progress on this, displacedhillbilly? Quote
wdwerker Posted November 8, 2013 Report Posted November 8, 2013 Ok I gotta ask "YARB " ? Is it an acronym? Slang? Not a term I am familiar with. Quote
Tpt life Posted November 8, 2013 Report Posted November 8, 2013 Read the thread title slowly.... Quote
G S Haydon Posted November 8, 2013 Report Posted November 8, 2013 Steve, I thought the same, thanks C. Quote
Andrew Pritchard Posted November 8, 2013 Report Posted November 8, 2013 Acronyms like this are used a lot on the internet, especially in the Unix/Linux communities. Often they have a superfluous initial letter. GNU for example stands for GNU is Not Unix Quote
Beechwood Chip Posted November 9, 2013 Report Posted November 9, 2013 The "Y" is not superfluous! YARB = Yet Another Roubo Bench, YACC = Yet Another Compiler Compiler, YAPC = Yet Another Perl Conference, etc. 1 Quote
sjeff70 Posted November 9, 2013 Report Posted November 9, 2013 Thanks guys! I'm actually making my own vises. I ordered 1 1/4" acme screws, a RH threaded for the leg vise and a LH threaded for the wagon vise. Got all the bearings & nuts & accessories from either ebay or other online retailers, and have found a local machine shop that will turn the collars on the screws for a small fee, but that needs to wait until the handwheels actually get delivered. The only thing that I really spent money on was the handwheels and leg vise. I ordered Kipp Wheels from Germany because I couldn't find any that I liked locally. I ordered a chain vise kit from Jim Ritter @ Ancora Yacht Services. The entire bench, vises and all comes in at just under $600 for materials thus far. I should be able to keep it under $700 by the time that I get misc lag screws, finish, extra glue, and have the acme screws turned. I'm interested in doing the same if I had the know-how. Where would one look to get equal to the task? Is it difficult to build your own? Quote
Eric. Posted November 9, 2013 Report Posted November 9, 2013 Sometimes Underwear Pies Excite Rabid Ferrets Like Useless Octopus' Upturned Suckerlegs Strong coffee this morning. Quote
Ozwald Posted November 9, 2013 Report Posted November 9, 2013 YAATHTUTJSIO Yet Another Acronym That's Harder To Understand Than Just Spelling It Out 1 Quote
Beechwood Chip Posted November 9, 2013 Report Posted November 9, 2013 IKWYM. IMHO TLAs etc can be a PITB. 2 Quote
Bombarde16 Posted December 6, 2013 Report Posted December 6, 2013 How's the gluing going? My bench is also a Roubo style specimen made out of construction lumber and I love it to death. Let's see some more pictures! 1 Quote
bobcrosley Posted December 16, 2013 Report Posted December 16, 2013 How's the gluing going? My bench is also a Roubo style specimen made out of construction lumber and I love it to death. Let's see some more pictures! Rob, I think you're now legally required to post pics of your bench. Also interested in seeing how this build is going. Quote
Bombarde16 Posted December 16, 2013 Report Posted December 16, 2013 Rob, I think you're now legally required to post pics of your bench. It's posted elsewhere and I'm not going to hijack the OP's thread. Quote
bobcrosley Posted December 16, 2013 Report Posted December 16, 2013 It's posted elsewhere and I'm not going to hijack the OP's thread. Understood. I'll find them... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.