Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tool Cabinet

Featured Replies

I am getting ready to build a a small tool cabinet but I just can't get over one issue I am having. In the sketchup model I use glass for the door but I keep thinking about all the potential space I am wasting by not making that area available for tool storage. Any thoughts on this?

I'd go for the extra storage.  Glass would be better for a few reasons, all unlikely:

  • you forget where your tools are so it's handy to see them through the glass.
  • you want to impress visitors to your shop with your cool tool collection.
  • later you want to re-purpose the cabinet to display knick-nacks in your living room.

The loss of extra storage is a negative, for sure, but I like the look of glass in a cabinet door. It gives the items behind the glass a more important and elegant feel. Do you have the shop space for two cabinets, to make up for lost space if you go for glass?

One negative for glass is that the items inside the cabinet will need to be clean and organized, as they are viewable.

  • Author

I like the look of glass too. At some point I intend to build an english or dutch tool chest so maybe I will just stick with the glass. 

Hey James. Its your shop, you call the shots. Glass will look nice. Get some lexan or something like that. It would be a shame to have something bump into the door and shatter it. If you do only handwork, no kickbacks to worry about, but if you leave a plane to far out when you go to close the door.... well you know, stuff happens :blink::o;)

  • Popular Post

I don't like glass in my shop because it's bound to be broken eventually.  Unless you're talking plexi...then you have to deal with the foggy/dirty/scratched/ugly factor.  Wood doors on tool cabinets for me.  Build a Krenov cabinet on stand next and use glass on that (if you have to use glass).  :)

  • Author

The last two comments brought up some good points. I do tend to get a little clumsy and am sure at some point I would break it. I will have to think on this for a day or so. Thanks for the comments!

If you like the clear look, go with an unbreakable material, lexan, polycarbonate, whatever. If you are not completely in love with the plastics and can go without the clear door, you will gain back useable space on the back side of the door. If you make the door such that you can undo the hinges easily enough and hang a new door you can always change your mind in the future ;)

  • Author

If you like the clear look, go with an unbreakable material, lexan, polycarbonate, whatever. If you are not completely in love with the plastics and can go without the clear door, you will gain back useable space on the back side of the door. If you make the door such that you can undo the hinges easily enough and hang a new door you can always change your mind in the future ;)

I really don't want to use plastics. That is a good point about the hinges, I may have to go route with the hinges. Thanks! 

James I've noticed that visitors to my shop are never, ever impressed by a display of tools. If you've ever walked into a restaurant kitchen you only ever see the food being cooked not the tools they are using to prepare it. What they are interested in is the craftmanship of the finished product, whether that is a furniture quality cabinet on the wall or the current project you have just finished. It's your shop so if you want to display the tools thru glass in a fantastic cabinet as a showcase of your craftsmanship (it's a great advertisement for your work) then go for it.

Personally I would go for extra storage by utilizing the back of the door. Glass or plastic will get covered in dust in a shop environment.

  • Author

James I've noticed that visitors to my shop are never, ever impressed by a display of tools. If you've ever walked into a restaurant kitchen you only ever see the food being cooked not the tools they are using to prepare it. What they are interested in is the craftmanship of the finished product, whether that is a furniture quality cabinet on the wall or the current project you have just finished. It's your shop so if you want to display the tools thru glass in a fantastic cabinet as a showcase of your craftsmanship (it's a great advertisement for your work) then go for it.

Personally I would go for extra storage by utilizing the back of the door. Glass or plastic will get covered in dust in a shop environment.

 

Another good point Terry. What visitors think really is not all that important to me. The glass would be just for my enjoyment. I am trying to go for style and function instead of something just utilitarian. I think the glass cabinet would look nice next to my joinery bench. 

I am getting ready to build a a small tool cabinet but I just can't get over one issue I am having. In the sketchup model I use glass for the door but I keep thinking about all the potential space I am wasting by not making that area available for tool storage. Any thoughts on this?

heres a small cabinet I refinished , you could make a bigger one .

post-14310-0-21529000-1381928938_thumb.j

Terry might be right, but if you happen to have some bronze tools from LN, you better show them off!

  • Author

I settled on a design with a door for holding tools, parts have already been rough cut so there is no going back now. This is not going to be a very large cabinet, I am only using 10 BF of hardwood and some 1/2" ply.  I thought about pinned rabbets for the cases but have decided I need to "suck it up" and cut dovetails. This means I get to put my new joinery bench to use. I guess I cannot call it a joinery bench if I don't actually cut any joinery on it! :P Thank you for everyone's input.

  • 1 month later...
  • Author

Thought I would post a couple pictures of the finished tool cabinet. I ended up going with a door with storage instead of glass. I kept the design pretty basic since I only had 10 Board of Tiger Maple to work with. I did attempt hand cut dovetails for all the case parts. Not the prettiest dovetails but in my defense I can count on one hand how many times I have cut dovetails. I did make a couple mistakes because I was rushing and that is why the block plane has its only little storage compartment. I am doing a full build write-up for the first issue of my magazine. I also left room for future additions!

post-104-0-82301800-1384903361_thumb.jpg

post-104-0-61955000-1384903362_thumb.jpg

post-104-0-39048000-1384903363_thumb.jpg

  • Author

Thanks guys! There were some moments where I had to kick myself for making a couple boneheaded mistakes but I guess that is all part of the process. 

James, you still have a lot to learn. Those were NOT bonehead mistakes! They're called design changes. :D

  • Author

I like it TR_ design changes! I need to learn a little patience too! Maybe I will start listening to Guns and Roses in the shop!

That's what you're doing wrong James! I always rock out in the shop! The neighbors can't hear my planes, but they sure can here the tunes!!

Ditto with Mel, James :-)  I like the hard rock station locally to give me energy and keep me motivated. Nothing like Mandatory Metallica to finish out the day :-P

 

The cabinet looks great and even though small, you should be able to pack it to the gills!! What magazine is this you speak of?

  • Author

I listen to music too, it was meant to be a play on words referencing the Guns and Roses song Patience. 

James,

I like my tool cabinet doors to be covered with "white-board" ro "dry-erase" material.

Then I leave dry erase markers everywhere in my shop. (I have to have scads of them, because they always walk off... It's an amazing phenomenon.) This way when I need to do some quick math or sketch something out... Welah!

 

Just a thought.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.