Recommended Posts

Posted

I've always said the best car salesmen will get you out he door without feeling like you just got bent over. You know you did, but at least you don't have to feel like you did. Car dealers and lawyers, one and the same. One just makes a ton more money.

Posted

My dad sold for three months and then quit. Claimed an honest man could not make a living selling cars. Granted, he was the low man and not an established salesman or company owner who could rely on volume.

Posted

:D  Thanks Mike. :)

 

First time I laid eyes on one I basically had a physical reaction akin to nausea.  But then I looked again, and again, and again, and suddenly I liked them a lot.  I dig the Euro look, and the payload is hard to argue with.  The hardest part for me to get over is the small wheels and tires, but that's how they build the Euro vans...and I'm gonna be really grateful when it's new tire time.

 

After the Morris chair I'm gonna work on some storage solutions in the cargo area, i.e. shelves and cabinets...and I'm gonna install a mega stereo. :D

Posted

No, it's just a shell Steve...painted metal.  It's loud as hell rolling down the highway so I'm gonna have to do something.  I was thinking about having Line-X sprayed on the floor and walls.  Whadda you guys think about that idea?

Posted

Insulate and ply the walls and ceiling( if it is raw metal). . 3/8" ply will resist impacts from shifting cargo much better than 1/4". You could use 1/8 or 1/4 on the ceiling. Fiberglass or sprayed in foam will quiet things down and keep the temperature extremes down. I had a custom van back in the 70's, got a StepVan in the 80's( still have it) and got the Transit a few months ago. It needs wall panels soon.

I got some heavy rubber mats that are made for horse stalls pretty cheap at Tractor Supply. They would make the floor non-slip and quieter. Or go the Line-X route.

Posted

What I'd really like to do is add a bulkhead with a door, but I'm guessing that would cost more than I wanna pay.  I'll probably try the Line-X...have a feeling that will deaden the sound quite a bit and it won't eat up any space.  Insulating and skinning the walls is definitely an option, but that will shrink my cargo space...and require work. :D

 

Today was my first work day with it.  I'm really diggin' the ride.  I badly need shelving though.  That's already obnoxiously obvious.

Posted

Install some shag carpeting and a mirror ball to go with that killer sound system you're putting in.

1972 Dodge Maxivan, Started customizing it my senior year in high school. By 1978 it had >100 watt power amp, (4 )- 6 x 9 Tri axial speakers , Pioneer Supertuner 8 track, multi level sculpted shag carpet, crushed velvet ceiling and bed. Mirrored ball and a 12 volt spotlight. Sunroof, running boards and bumpers out of solid walnut ! I had fathers refuse to let their daughter go out in it. Asked if my fathers Oldsmobile was a safe alternative, went home and traded cars, picked up the girl went back and got the van......

I had a lot of fun with that van, still miss it sometimes.

Posted

check out 'dynamat' for noise control. Peel and stick sheets that will help with sound dampening. 

 

Over on the sprinter owner's forum there are numerous 'build' threads, and this is one of the 'cool' vans... he took a stock sprinter and is modifying it into a camper for bike and motorcycle/camping  use http://sprinter-source.com/forum/showthread.php?t=17258 lots of info in there on how he took the 'boom' out of his van. 

  • Like 1
Posted

Thanks for the suggestions and thanks for the link, Ned...I've been looking at that site for about an hour.  People go nuts with these things.  Mine is for work so I won't be making a hotel room out of the cargo area, but it's still gonna be pimped custom to my specific needs.

 

I think Carus hit the nail on the head and I'm gonna end up building my own bulkhead...especially since I just found out that RAM does not offer a factory version (yet) and I'd have to have it done custom...$$$...no thanks.  Plywood is in my future. :)   Just gotta find the right materials to put on the cab side of it to make it quiet and pretty...some good ideas on that Sprinter site.  This project is a ways off I'm afraid.

Posted

Ahh the "global van". Fiat, Peugeot & Citroen have been using that same body on their vans for a while now.

 

boxer_van_accessories_2006-up_peugeot_va

 

I love the fact petrol is a legit fuel choice, in V6 format too! Diesel only here. If it's anything like the Euro based versions it's the cheaper end of middle. Solid with no frills, jut my cup of tea. VW is sweet but too freakin expensive. I get to drive this

 

2002-citroen-berlingo-fir-5_600x0w.jpg

 

And before that this (ex post office), with a home made wooden roof rack. Yeah, women loved me!

 

msiq6MRE5J-W3J_IY24enNw.jpg

  • Like 1
Posted

Make the bulkhead as a sandwich of 2" styrofoam insulation between 2 sheets of 1/8 or 1/4 ply. That will eliminate a lot of noise.

 

That's a possibility, but I'd still have to upholster the cab side of it with something to make it look nice...I'm intrigued by that Luxury Liner Pro stuff, but I don't know how nice it looks.  And good lord it's expensive.  The big design question will be how to make the door.  Swinging or pocket?  Hmmm...decisions, decisions...

 

 If it's anything like the Euro based versions it's the cheaper end of middle. Solid with no frills, jut my cup of tea.

 

 

 

Actually, compared to the other two big American offerings from Chevy and Ford, it's the most expensive of the three.  I could have landed a Ford for less than 2/3 the cost of the RAM, but I apparently became a sucker for the Euro style.  But yes, compared to the Mercedes Sprinter, the Promaster is definitely the budget-friendly option.

Posted

Friend of mine is a fitter for a crop sprayer maker. His firm have a new sprinter every four years when it's done abour 250000.00. They have caught fire, rusted out and blown up. Merc can be sweet but I'm less sure how deep the beauty goes these days. Same think with sprinters, VW & Merc share the body (I think). Any how, enjoy it, I look forward tot he wooden roof rack!

Posted

The big design question will be how to make the door. Swinging or pocket? Hmmm...decisions, decisions...

What kinda woodworker are you, anyway?!? The natural choice is to apply burl veneer to the cab side, paint the cargo side Mere Mortals purple, and use a tambour door!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 41 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined