..Kev Posted November 9, 2014 Report Posted November 9, 2014 Client request this time.. Looks like the freebies paid off Quote
Boatworks Today Posted November 9, 2014 Report Posted November 9, 2014 Very cool, that's the first I've seen that fine 'V' design Quote
..Kev Posted November 9, 2014 Author Report Posted November 9, 2014 Very cool, that's the first I've seen that fine 'V' design Thanks, I'm pretty sure I can't take credit for it as I'm sure it's been done.. Quote
Freddie Posted November 9, 2014 Report Posted November 9, 2014 The only long grain boards I've ever loved! Nice work man! 1 Quote
wouldwurker Posted November 9, 2014 Report Posted November 9, 2014 Gorgeous, man. What's the wood? Quote
..Kev Posted November 9, 2014 Author Report Posted November 9, 2014 Gorgeous, man. What's the wood? Thanks! Dark one is Walnut, Maple, and Purple Heart Light one is Maple, Sapele, and Wenge The only long grain boards I've ever loved! Nice work man! I'm pretty sure it was you that challenged me to do them in end grain Quote
Freddie Posted November 9, 2014 Report Posted November 9, 2014 I'm pretty sure it was you that challenged me to do them in end grain I will allow this. 1 Quote
Mzdadoc Posted November 9, 2014 Report Posted November 9, 2014 Those are beautiful cutting boards!!!! Quote
wdwerker Posted November 9, 2014 Report Posted November 9, 2014 They look awesome ! So when are you gonna try an end grain version? You have the tools. You have the skills..... Quote
Coop Posted November 10, 2014 Report Posted November 10, 2014 Damn Kev, You' re getting pretty darn good at this Quote
bushwacked Posted November 10, 2014 Report Posted November 10, 2014 Wow those are awesome!! How did you get the Vs and the curved lines in color? Quote
..Kev Posted November 10, 2014 Author Report Posted November 10, 2014 Wow those are awesome!! How did you get the Vs and the curved lines in color? It's like bent lamination.. Build the board, cut (wavy line) in half. Pick 3 thin strips of wood of choice, glue them together and in the 2 halves of the board. Suck it all up tight with clamps to cure. Next day, draw the opposite wavy line and repeat... Here's a pic of a first wavy glue up, hope it all makes sense.. Quote
bushwacked Posted November 10, 2014 Report Posted November 10, 2014 Makes perfect sense actually. Not as difficult as I was thinking it would be. Maybe one day when I get better I will try it out. On a side note. Those clamps make me jealous. I am slowly working on building my clamp collection. I pretty much get a new one per month. It's a slow process haha. Quote
..Kev Posted November 10, 2014 Author Report Posted November 10, 2014 These boards are fairly simple to build, just time consuming waiting for glue to dry. They would be much more difficult without the clamps. It took me a while as well to build up the clamp collection. I have had my rack emptied several times on various projects so, there are more of them in my future as well. Quote
bushwacked Posted November 10, 2014 Report Posted November 10, 2014 If the hard part is drying maybe I have a shot haha. Well once I get some good clamps that is. Are you using a drum sander on these to make the sanding a little easier or just a RoS starting with real low grit? Quote
..Kev Posted November 10, 2014 Author Report Posted November 10, 2014 Are you using a drum sander on these to make the sanding a little easier or just a RoS starting with real low grit? Yes.. Before I had the drum sander, I used a domino to keep things aligned. A biscuit jointer would work as well.. Quote
Eric. Posted November 10, 2014 Report Posted November 10, 2014 Boards look great, Kev. Do you go straight from the bandsaw to glue-up or do you clean the curves somehow? Or do you use a template and a router? I saw that article in FWW or PWW, whichever it was, but I never ended up reading it. Here's one for you, bush...I'm close. Quote
..Kev Posted November 10, 2014 Author Report Posted November 10, 2014 Boards look great, Kev. Do you go straight from the bandsaw to glue-up or do you clean the curves somehow? Or do you use a template and a router? I saw that article in FWW or PWW, whichever it was, but I never ended up reading it. Here's one for you, bush...I'm close. Thanks Eric! I do typically go straight from the bandsaw to the glue up. It's imperative that the 2 halves fit perfectly together so, I just really take my time on the bandsaw to get a nice clean cut. Quote
..Kev Posted November 10, 2014 Author Report Posted November 10, 2014 You must have a steady hand yo! No more than anyone else I suppose.. As long as the 2 halves fit together perfectly, it all works well. 1 Quote
..Kev Posted November 10, 2014 Author Report Posted November 10, 2014 I have another ready to go.. If I get to it tomorrow, I'll snag a picture off of the bandsaw for you to see. Quote
bob493 Posted November 10, 2014 Report Posted November 10, 2014 Must... .resist.... clamp... envy..... GAHHHHHH! I have so many clamps, but when I see nice, well presented setups like this, I just hang my head in shame haha. Very lovely collection! Boards look great, Kev. Do you go straight from the bandsaw to glue-up or do you clean the curves somehow? Or do you use a template and a router? I saw that article in FWW or PWW, whichever it was, but I never ended up reading it. Here's one for you, bush...I'm close. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.