Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Floating Top Hall Table, Black Walnut, Ebonized Oak

Featured Replies

Just finished this floating top hall table. 14" deep, 49" long, and 31" tall.

 

I ebonized some oak using Speedball India Ink. It was a very interesting process. I did three coats, with a wipe of #0000 steel wool between coats. In the end the ink seemed like a thin coat of black paint - and it is BLACK! 

 

I finished the entire piece with a hard wax oil, two coats also with a #0000 steel wool wipe down between coats. I don't think the wax oil penetrated the ink, but it gave it a nice sheen when polished.

 

The black walnut is from a local sawyer.

post-15223-0-98679400-1433180857_thumb.j

post-15223-0-15030800-1433180861_thumb.j

post-15223-0-55250000-1433180864_thumb.j

post-15223-0-11140000-1433180882_thumb.j

post-15223-0-71641000-1433180899_thumb.j

Awsome piece!!! I love floating tops! Is there a side apron? I can't tell if there is one that is inset under the top. If there are no side aprons what keeps it from racking?

Wow - nice Job. Can you elaborate more on then colouring process? I really like the dark colour.

  • Author

Awsome piece!!! I love floating tops! Is there a side apron? I can't tell if there is one that is inset under the top. If there are no side aprons what keeps it from racking?

there are three - one in the middle, and two out near the ends. they are set in a bit, where the through tenons are. the top sits on them. having them sit in so far make it look there are not sides.

  • Author

Wow - nice Job. Can you elaborate more on then colouring process? I really like the dark colour.

there's not really much more to say. i used a foam brush to apply the ink, and did three coats. it dries really fast,so was able to put the next coat on after 30 minutes. it was very simple, not even I could screw it up. i tested a wipe-on poly to see how it would look over the top of the ink, and to see if it made the ink run - I didn't want to mess up the contrast at the dovetails. it worked fine, no smudging. I went with the hard wax oil, because I like non-toxic finish and the more natural look and feel.

Shane, is that a 45* chamfer and how did you cut it?

Great job!

  • Author

Shane, is that a 45* chamfer and how did you cut it?

Great job!

Yes it is. I cut the ends first on my sliding miter saw, then cut the long one on the table saw. Used a hand plane, scraper and sand paper to clean them up.

Yes it is. I cut the ends first on my sliding miter saw, then cut the long one on the table saw. Used a hand plane, scraper and sand paper to clean them up.

I think I will make mine where the long sides are not parallel, wider in the middle. There has to be a name for it, oblique comes to mind but doesn't sound right. Anyway, I guess I'll use a chamfer bit w/ bearing.

You did good!

  • Author

Aelwesome job Shane! The almost gun-blue black makes for a very interesting and unique look. I'm going to steal that idea soon!

it may look gun-blue black on your screen, but let me assure you it's JET BLACK - like black, and only black. like looking into the eyes of a demon.

  • Author

I think I will make mine where the long sides are not parallel, wider in the middle. There has to be a name for it, oblique comes to mind but doesn't sound right. Anyway, I guess I'll use a chamfer bit w/ bearing.

You did good!

would you do the just oblique the front out to a shallow point, or make it like a parallelogram?

Very well done, Shane.  Looks like a combination of a recent FWW (PWW?) build and the one I did a few years ago. :)

 

You do good work.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.