jmako095 Posted June 7, 2015 Report Posted June 7, 2015 Finished product of an anchor intarsia I recently designed and finished. Ended up being far more technical than expected because of having to bevel the wood before cutting a majority of the pieces. Quote
..Kev Posted June 7, 2015 Report Posted June 7, 2015 Awesome piece! How big is it? There's nothing in the pictures to reference size. Great detail! Quote
jmako095 Posted June 7, 2015 Author Report Posted June 7, 2015 Piece is approximately 15 inches from top to bottom and 12 inches wide. Thank you for the kind words. Quote
wdwerker Posted June 7, 2015 Report Posted June 7, 2015 Looks great ! I like the flukes, they remind me of a dragons tail. Quote
wtnhighlander Posted June 8, 2015 Report Posted June 8, 2015 Very nice! The irregularity of the rope twists is a perfect compliment to the smooth symmetry of the anchor. Thanks for sharing that! Quote
Eric. Posted June 8, 2015 Report Posted June 8, 2015 That is killer, man. Nicely done. Original design or did you use a pattern you got somewhere? Quote
Tom Cancelleri Posted June 8, 2015 Report Posted June 8, 2015 Pretty awesome. Lots of attention to detail there. Quote
jmako095 Posted June 8, 2015 Author Report Posted June 8, 2015 Design was about 4" square and was a picture of a tattoo. From there had to enlarge it and then re-draw a lot of it because lines were noticeably off. I added the shading look from it's original flat form look. The woods are sapele, cherry and basswood. Originally had planned on using white oak instead of basswood for the rope; however, with all of the shaping and graduating of heights, ended up being a blessing that I used basswood instead. Quote
banderson Posted June 8, 2015 Report Posted June 8, 2015 Great job. Love the detail in the rope Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.