Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bocote Box

Featured Replies

Coop asked for this...so blame him.

I am always hesitant to post a project journal.

It puts the pressure on for me to complete something that is presentable to the forum, plus I figure that it will be uninteresting to most people who have a modicum of woodworking skills since it's only a basic box.

 

Still...here we go again.

I hope you enjoy.

If I ruin the thing, and never finish, don't be surprised.

Plenty of my projects don't come to fruition.

Many times I screw something up which I can't repair and at the same time I can't tolerate the look of the mistake and therefore I don't try to salvage the project. Most times I start over, sometimes not.

Sometimes I engage in an immediate do-over, but it can also lead to moving on to the next project (and the next series of screw-ups).

 

With all that said...

I'm feeling the pressure.

My plan was to make a couple of gift boxes for a couple of weddings I had coming around.

In October it's my brother's turn. The last gift box needed for the month of June turned out well, so I have been mulling over how to complete a second "wedding worthy" box.

 

My solution to the dilemma of doing good enough and getting it done soon so the finish can gas off before it makes its debut is to make a few boxes and perhaps one will be good enough.

 

Right now I'm working on a Bocote box which is directly based upon my successful box.

I've cut the four sides and I think I may be decided on a bottom, but I'm up in the air about the lid.

 

I started out with this lumber:

http://IMG_1076_zps4w2gghdv.jpg

 

and I'm working on some lay-out for a possible lid.

http://IMG_1083_zps7ggl1zaa.jpg

  • Replies 87
  • Views 17.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • wouldwurker
    wouldwurker

    I think I found the inspiration...:) Looking great Dave!

  • bushwacked
    bushwacked

    This better be finished I want to see that grain come to life [emoji1][emoji1]

  • Madkrafter
    Madkrafter

    It's all going to be just fine! "Slow is Fast" as they say. In 30 years of woodworking, I still manage to make mistakes. It's how you recover and cover up those mistakes that makes you a good woodwork

Posted Images

I think you put too much pressure on yourself!  It's looking great!

Don't point out what could go wrong. It will look great and we are glad you are sharing.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

This better be finished I want to see that grain come to life [emoji1][emoji1]

NOW DROP AND GIVE ME 20 CROSS CUTS!!!

It's all going to be just fine! "Slow is Fast" as they say. In 30 years of woodworking, I still manage to make mistakes. It's how you recover and cover up those mistakes that makes you a good woodworker! On many projects, the best thing I've discovered is to take a break, think ahead a bit and consider the next move (or 2). Good luck. Looking good so far.

Dave, I think others are wrong and you're right. The Pressure is definately on!

But you've put yourself in front of a pretty non critical audience so that will help.

All kidding aside, as good as the last one turned out, I'm definately looking forward to this one.

Dave, I think others are wrong and you're right. The Pressure is definately on!

But you've put yourself in front of a pretty non critical audience so that will help.

to expand on coops "help" let me remind you how expensive that exotic wood is... Don't screw up, it'll cost you a fortune! :D

Suweetttt. I absolutely love the look of bocote. I've never worked it but do look forward to it.

Looking good !

Bocote can be polished to a shine without any finish. It's so hard and dense . But watch out for chip out on unsupported cross cuts .

I love that lid inlay. Simple and elegant, with a slight chamfer or roundover it'd be badass!

 

Don't give pressure yourself to make it look like a million bucks. I've made errors during a build, I highlight my errors and discuss how I fixed them. 

I worked a bit on the lid inlay.

">http://IMG_1086_zpssyylse8d.jpg

 

">http://IMG_1088_zpsmfeflref.jpg

I likes it a whole bunch!

Ensure kind of wood is the top? I've got some lace wood with that pattern but wrong color.

Very cool!  That will look awesome with finish!

  • Author

Ensure kind of wood is the top? I've got some lace wood with that pattern but wrong color.

Yeah that's Lacewood.

I think "Lacewood" has several different varieties. This is sort of a pale pinkish.

That top really looks like it's going to pop awesome with finish! 

That top really looks like it's going to pop awesome with finish!

Agreed. Can't wait to see it come to life.

Ensure kind of wood is the top? I've got some lace wood with that pattern but wrong color.

 

You may have leopardwood then.  Looks just like lacewood only it's darker.

 

Like this?

 

 

13012024.JPG

Eric I think you may be right. Mine is much closer to your picture. A bit lighter but small looking formations. Not large ones.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.